SHEET 1 OF 1 16.00 .10 [.630 .004 in] 18.00 [.709 in] 7.40 .15 [.291 .006 in] RING ILLUMINATION: ORANGE / GREEN 6.00 [.236 in] 11.90 [.469 in] RECOMMENDED PANEL CUTOUT MAX. PANEL THICKNESS 10.0 [.315 in] 9.20 [.362 in] LASER ETCHED POWER SYMBOL (M01) FLAT ACTUATOR: BLACK ANODIZED ALUMINUM SWITCH FUNCTION POS. 1 POS. 2 OFF (ON) OPEN (1-2) ( ) = MOMENTARY 1 2 ORANGE (FORWARD) + - BODY: BLACK ANODIZED ALUMINUM 1.50 [.06 in] (+) (-) - + GREEN (REVERSE) SPST OFF (ON) CONTACT CONFIGURATION 16.5 1.0 [.65 .04 in] M16x1.0 20.0 1.0 [.79 .04 in] NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X = 0.4 X.XX = 0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: SILVER PLATED COPPER 5. RATING: 2A 48VDC 6. ELECTRIC LIFE: 200,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 M MIN. 8. DIELECTRIC STRENGTH: 2,000 VAC MIN. FOR 1 MINUTE 9. CONTACT RESISTANCE: 50m MAX. @ 1A 12VDC 10. OPERATING TEMP.: -20 C to 55 C 11. TRAVEL: 1.8mm 12. DENOTES CRITICAL PARAMETER. 13. ILLLUMINATION VOLTAGE: 1.8V 20mA FORWARD, 2.8V 20mA REVERSE 14. HARDWARE SUPPLIED: O-RING AND HEXNUT (NOT SHOWN) 2 1 (-) 1 (+) 2.00 [.079 in] .50 [.020 in] 8.40 [.331 in] 9.80 [.386 in] 7.30 .15 FLAT [.287 .006 in] B 21946 CHANGE ILLUM. P.S. TO ETCHED P.S. 8/17/15 MW A 21604 INITIAL RELEASE 10/8/14 EBP REV PCR NO DESCRIPTION DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED (-) TITLE SCALE PV6F24011-3K1-M01 2:1 DWG DR DATE 10/8/2014 EBP 52-PV6F240113K1M01 REV B