dr1p5 I s o l a t e d a n d R e gulated 1.5 WATT Modul ar DC/DC Converters series Low Ripple and Noise PI Input Filter Regulated Outputs 500V Isolation 5 Sided EMI Shielding Unit measures 0.8”W x 1.25”L x 0.4”H Model Number Standard 24 Pin DIP & SMD Packages Output Voltage Output mAmps Input RangeInput CurrentEfficiency Max. Capacitive Load SINGLE OUTPUT DR1P5-05S05(SMD) 5 VDC DR1P5-12S05(SMD) DR1P5-24S05(SMD) DR1P5-05S12(SMD) 12 VDC DR1P5-12S12(SMD) DR1P5-24S12(SMD) DR1P5-05S15(SMD) 15 VDC DR1P5-12S15(SMD) DR1P5-24S15(SMD) 300 300 300 125 125 125 100 100 100 4.5-5.5 VDC600mA54% 10.8-13.2 VDC245mA55% 21.6-26.4 VDC125mA54% 4.5-5.5 VDC625mA52% 10.8-13.2 VDC260mA52% 21.6-26.4 VDC130mA52% 4.5-5.5 VDC588mA55% 10.8-13.2 VDC245mA55% 21.6-26.4 VDC123mA55% 470uF 470uF 470uF 330uF 330uF 330uF 330uF 330uF 330uF DUAL OUTPUT DR1P5-05D05(SMD) +/-5 VDC DR1P5-12D05(SMD) DR1P5-24D05(SMD) DR1P5-05D12(SMD) +/-12 VDC DR1P5-12D12(SMD) DR1P5-24D12(SMD) DR1P5-05D15(SMD) +/-15 VDC DR1P5-12D15(SMD) DR1P5-24D15(SMD) +/-150 +/-150 +/-150 +/-60 +/-60 +/-60 +/-50 +/-50 +/-50 4.5-5.5 VDC682mA48% 10.8-13.2 VDC278mA49% 21.6-26.4 VDC142mA48% 4.5-5.5 VDC632mA51% 10.8-13.2 VDC255mA51% 21.6-26.4 VDC128mA51% 4.5-5.5 VDC600mA54% 10.8-13.2 VDC250mA54% 21.6-26.4 VDC125mA54% 330uF 330uF 330uF 110uF 110uF 110uF 110uF 110UF 110UF Note - (SMD) Denotes that these products are available in a Surface Mount Technology Package. (Please see page 3) To order a DR1P5 product with the optional Surfae Mount Package, simply add ”SMD” to the end of the standard Part Number. For example DR1P5-05S05SMD. WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 dr1p5 I s o l a t e d a n d R e gulated 1.5 WATT Modul ar DC/DC Converters INPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Input Voltage Ranges: 5 VDC Nominal 12 VDC Nominal 24 VDC Nominal Input Filter 4.5-5.5 VDC 10.8-13.2 VDC 21.6-26.4 VDC PI Type OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Load Regulation 20% to FL D05 +/-1.5% All Others +/- 0.5% Cross Regulation Asymmetrical Load 25/100% +/-5% Line Regulation +/- 0.3% Temperature Coefficient +/-0.02%/DegC Ripple/Noise(Single/Dual) 50mV Pk-Pk, typ Voltage Accuracy +/- 4%, max Short Circuit Protection Short Term GENERAL SPECIFICATIONS Input-Out Isolation In/Out Capacitance Efficiency Switching Frequency Isolation Resistance OUTPUT POWER (%) Oper. Temperature -25 to +71 DegC(FL) Relative Humidity 5 to 95%, RH Storage Temperature -55 to +105 DegC * Maximum Case Temp 100 DegC * Thermal Impedance 20DegC/Watt Thermal Shock MIL-STD-810D Vibration 10~55Hz, 10G, 30 Minutes along X, Y, and Z MTBF 5.53 MHrs BELLCORE TR NWT 000332 Case1: 50% Stress, Temp at 40DegC, Ground Fixed and controlled environment EMC Conducted Emissions EN55022 Class A Radiated Emissions EN55022 Class A ESD EN61000-4-2 Criteria B Radiated Immunity EN61000-4-3 Criteria A Fast Transient EN61000-4-4 Criteria B Surge EN61000-4-5 Criteria B Conducted Immunity EN61000-4-6 Criteria A PHYSICAL SPECIFICATIONS 500VDC 30 pF 52%, typ 20Khz 10000 M Ohms Dimensions 1.25x0.80x0.40” Case Material Nickel-Coated Copper with Non-Conductive Base Potting Material Epoxy (UL-94-V0) Construction Fully Encapsulated Weight DIP 15.6g (0.55 oz) SMD 18g (0.62 oz) OUTPUT DERATING CURVE DR1P5-24S05 Derating Curve 100 All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted 75 50 series * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. Nature convection 25 0 -40 -25 -10 0 50 60 70 80 90 100 AMBIENT TEMPERATURE (ºC) WWW.ASTRODYNE.COM Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 I s o l a t e d a n d R e gulated 1.5 WATT Modul ar DC/DC Converters dr1p5 series MECHANICAL DIMENSIONS 0.01 x 0.02 (0.25 x 0.50) Rectangular Pin 1 2 3 15 14 13 10 11 12 1.25 (31.8) 0.90 (22.9) 24 23 22 0. 10 ( 2. 5) 0.08(2.0) 0.15 (3.8) 0.60(15.2) 0.40 (10.2) 0.80(20.3) Pin # Single OutputsDual Outputs 1 2 3 10 11 12 13 14 15 22 23 24 + Input NC NC - Output + Output - Input - Input + Output - Output NC NC + Input Pin # Single OutputsDual Outputs 1 2 3 10 11 12 13 14 15 22 23 24 Others + Input NC NC - Output + Output - Input - Input + Output - Output NC NC + Input NC + Input - Output Common Common + Output - Input - Input + Output Common Common - Output + Input Suffix - SMD 20 Pin Area 0.04 x 0.02 (1.0 x 0.5) 16 13 1 BOTTOM VIEW 5 9 12 0.80(20.3) WWW.ASTRODYNE.COM 0.43(10.9) 1.26 (32.0) 24 0.25 (6.35) 0.02(0.5) 0.92(23.4) 0.44(11.2) 0.15 (3.81) 0.10 (2.54) 1.00(25.4) + Input - Output Common Common + Output - Input - Input + Output Common Common - Output + Input NC ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458