PRODUCT SPECIFICATION Part Number PDC56SM-CxMRGB1 Details .56” (14.2mm) Single Digit SMD Display Common Anode and Common Cathode Emitting Color: Red, Green, Blue AlInGaP and InGaN dice used Features Qualified according to JEDEC moisture sensitivity level 2A RoHS Compliant Low Power Consumption Gray Face, White Segment Easy mounting on PCB Mechanical Dimensions Notes: 1. Dimension in millimeter [inch], and tolerance is ±0.25 [.010] unless otherwise noted. 2. Bending≤Length*1%. www.p‐tec.net 071513 Rev0 MS Page 1 of 9 Device Selection Guide Model Number Common Anode Common Cathode PDC56SM-CAMRGB1 Chip Material AlInGaP InGaN InGaN PDC56SM-CCMRGB1 Emitting Color Orange-Red Green Blue Absolute Maximum Ratings at Ta=25 Orange-Red Parameter Power Dissipation per Dice Derating Liner from 25 per Dice Continuous Forward Current Per Dice Peak Current Per Dice (duty cycle 1/10, 1KHz) Reverse Voltage Per Dice Operating Temperature Storage Temperature Symbol PAD -IAF IPF VR Topr Tstg Rating 70 0.33 25 90 5 -40~+105 -40~+105 Unit mW mA/ mA mA V Symbol PAD -IAF IPF VR ESD Topr Tstg Rating 114 0.4 30 100 5 1000 -40~+105 -40~+105 Unit mW mA/ mA mA V V Symbol PAD -IAF IPF VR ESD Topr Tstg Rating 114 0.4 30 100 5 1000 -40~+105 -40~+105 Unit mW mA/ mA mA V V Green Parameter Power Dissipation per Dice Derating Liner from 25 per Dice Continuous Forward Current Per Dice Peak Current Per Dice (duty cycle 1/10, 1KHz) Reverse Voltage Per Dice Electrostatic Discharge (HBM) Operating Temperature Storage Temperature Blue Parameter Power Dissipation per Dice Derating Liner from 25 per Dice Continuous Forward Current Per Dice Peak Current Per Dice (duty cycle 1/10, 1KHz) Reverse Voltage Per Dice Electrostatic Discharge (HBM) Operating Temperature Storage Temperature www.p‐tec.net 071513 Rev0 MS Page 2 of 9 Electrical and Optical Characteristics at Ta=25 Orange-Red Parameter Forward Voltage Per Segment Luminous Intensity Per Segment Peak Emission Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Reverse Current Luminous Intensity Matching Ratio Symbol VF Iv λP Ld Δλ IR Iv-m Min. -------- Typ. 2 8 632 625 20 --- Max. 2.8 Symbol VF Iv ld Δλ IR Iv-m Min. ------- Typ. 3.2 70 525 30 --- Max. 3.8 Symbol VF Iv ld Δλ IR Iv-m Min. ------- Typ. 3.2 12 470 30 --- Max. 3.8 100 2:1 Unit V mcd nm nm nm μA -- Condition IF=20mA IF=10mA IF=20mA IF=20mA IF=20mA VR=5V IF=10mA Unit V mcd nm nm μA -- Condition IF=20mA IF=10mA IF=20mA IF=20mA VR=5V IF=10mA Unit V mcd nm nm μA -- Condition IF=20mA IF=10mA IF=20mA IF=20mA VR=5V IF=10mA Green Parameter Forward Voltage Per Segment Luminous Intensity Per Segment Dominant Wavelength Spectrum Radiation Bandwidth Reverse Current Luminous Intensity Matching Ratio 100 2:1 Blue Parameter Forward Voltage Per Segment Luminous Intensity Per Segment Dominant Wavelength Spectrum Radiation Bandwidth Reverse Current Luminous Intensity Matching Ratio www.p‐tec.net 071513 Rev0 MS 100 2:1 Page 3 of 9 All Light On Segments Feature & Pad Position Internal Circuit Diagram www.p‐tec.net 071513 Rev0 MS Page 4 of 9 Typical Electrical / Optical Characteristic Curves Orange-Red www.p‐tec.net 071513 Rev0 MS Page 5 of 9 Typical Electrical / Optical Characteristic Curves Green www.p‐tec.net 071513 Rev0 MS Page 6 of 9 Typical Electrical / Optical Characteristic Curves Blue www.p‐tec.net 071513 Rev0 MS Page 7 of 9 IR Reflow Temperature / Time Notes: 1. We recommend reflow temp of 245 (+/-5 ) Maximum soldering temp should be limited to 260 2. Do not cause stress to the epoxy resin while it is exposed to high temperature 3. Number of reflow process shall be 2 times or less Soldering Pad Size www.p‐tec.net 071513 Rev0 MS Page 8 of 9 Reel Dimensions Packing and Label Specifications Note: 1. Specifications subject to change without notice. www.p‐tec.net 071513 Rev0 MS Page 9 of 9