PL25 Series 5mm (T1¾) LED - P-TEC

P-tec Corp.
Tel:(866) 695 4162
2405 Commerce Circle Tel:(719) 589 3122
Alamosa CO 81101
Fax:(719) 589 3592
www.p-tec.net
PL25 Series 5mm (T1¾) LED
Absolute Maximum Ratings at TA = 25°C
Features
*Popular 5mm Lens Style
without Flange
*AlGaAs Super Bright Red
LED Chip used
*Low Current Requirements
*High Light Output
*Reliable & Rugged
*IC compatible
*RoHS Compliant
Power Dissipation…………………………………………………………………………...…. 66mW
Reverse Voltage (<100μA) …….……………...………………………………………………….. 5.0V
Max Forward Current …………..………………..……………………………………………. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) ....…………………………………….. 100mA
Operating Temperature Range ……………………………………………………… - 25°C to +85°C
Storage Temperature Range ………….……………………………………………. - 40°C to +100°C
Soldering Temperature (1.6mm below body) ……………………………………..… 260°C for 5 seconds
Electrical & Optical Characteristics at TA = 25°C
Emitting
Color
Part Number
Chip
Material
Color Diffused Lens
PL25-CDR21
Deep Red
AlGaAs
Peak
Wave
Length
Dominant
Wave
Length
Viewing
Angle
2θ ½
nm
nm
660
643
Forward
Voltage
@20mA (V)
Luminous
Intensity
@20mA (mcd)
Deg
Typ
Max
Min
Typ
30°
1.8
2.2
110.0
200.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads.
8.6
24.0Min.
4.8
2.54 ±0.1
4.8
Anode
0.5 Square
1.5typ.
06.09.14 REV 1 JAS