P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL15 Series 5MM (T1¾) LED Absolute Maximum Ratings at TA = 25°C Features *Popular 5mm Low Profile Lens Style without Flange *GaP Red LED Chip used *Low Current Requirements *High Light Output *Reliable & Rugged *IC compatible *RoHS Compliant Power Dissipation…………………………………………………………………………...…. 90mW Reverse Voltage (<100µA) …….……………...………………………………………………….. 5.0V Max Forward Current …………..………………..……………………………………………. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) ....…………………………………….. 100mA Operating Temperature Range ………………………………………………………- 25°C to +85°C Storage Temperature Range ………….…………………………………………….- 40°C to +100°C Soldering Temperature (1.6mm below body) ……………………………………..…260°C for 5 seconds Electrical & Optical Characteristics at TA = 25°C Emitting Color Part Number Chip Material Color Diffused Lens PL15-CDR24 Red GaP Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm Deg Typ Max Min Typ 700 650 38° 2.1 2.6 2.0 5.0 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads. 7.5 24.0Min. 4.8 4.8 2.54±0.1 Anode 0.5 Square 1.5typ. 03-08-07 REV 0 RS