Model WS100 with analog output Sensor for hostile environments and offshore applications, with compression-proof sealing · Protection class IP68 · Measurement ranges: 0 ... 2000 mm und 0 … 3500 mm · Analog output · Anodized aluminium housing Outputs Specifications Material Resolution Sensing device Connection Linearity Weight Temperature range Conformity to standards EMC Protection class of housing Shock Vibration Order code WS100 Analog Potentiometer: 1 kW Voltage: 0...10 V Current: 4...20 mA, 2 or 3 wire Stainless steel or aluminium; cable: stainless steel Essentially infinite Hybrid precision potentiometer Cable output, standard length 1.5 m Up to ±0.05 % full scale Approx. 13 kg (stainless steel) -20 to +70 °C EN 61326:2004 EN 60529:2000, IP 67 EN 60068-2-27:1993, 50 g 11 ms, 100 shocks EN 60068-2-6:1995, 20 g, 10 Hz...2 kHz, 10 cycles WS100xxx Model name WS100AL = Version in aluminium housing Measurement Range (in mm) 2000 / 3500 Outputs (see pages 57 and 58) R1K = potentiometer 1 kW (other values on request) 10V = with 0 ... 10 V signal conditioner 420A = mit 4 ... 20 mA signal conditioner (2 wire) 420T = mit 4 ... 20 mA signal conditioner (3 wire) Other outputs on request Linearity L10 = ±0.10 % option: L05 = ±0,05 % L25 = ±0.25 % Connection KAB1,5M = cable output, length 1.5 m (standard) Cable fixing M4 = M4 cable fixing SB0 = Cable clip Order Example: WS100AL - 2000 - 420A - L10 - KAB1,5M - M4 42 CAT-WS-E-05 www.asm-sensor.com ASM Model WS100 with analog output Cable forces typical at 20 °C Range [mm] Maximum pull-out force [N] Minimum pull-in force [N] 2000 3500 5.2 6.2 2.8 3.0 Outline drawing WS100 - 2000 Outline drawing WS100 - 3500 Dimensions informative only. For guaranteed dimensions consult factory. ASM www.asm-sensor.com CAT-WS-E-05 43 Model WS100 with incremental encoder output Sensor for hostile environments and offshore applications, with compression-proof sealing · Protection class IP68 · Measurement ranges: 0 ... 2000 mm and 0 … 3500 mm · With incremental encoder output · Anodized aluminium housing Outputs Material Resolution Specifications Sensing device Connection Linearity Weight Temperature Conformity to standards EMC Protection class of housing Shock Vibration Order code WS100 Incremental Incremental encoder output HTL or TTL compatible Stainless steel or aluminium; cable: stainless steel 2000 mm: 5 or 10 pulses per mm 3500 mm: 2.75 or 5.5 pulses per mm Incremental encoder Cable output, standard length 1.5 m Up to ±0.05 % full scale Approx. 13 kg (stainless steel) -20 to +70 °C EN 61326:2004 DIN EN 60529:2000, IP 67 DIN EN 60068-2-27:1993, 50 g 11 ms, 100 shocks DIN EN 60068-2-6:1995, 20 g, 10 Hz … 2 kHz, 10 cycles WS100xxx Model name WS100AL = Version in aluminium housing Measurement Range (in mm) 2000 / 3500 Pulses per mm 2000 mm: 5 / 10 3500 mm: 2.75 / 5.5 Outputs (see page 60) IE24LI = Incremental encoder TTL compatible inverted IE24HI = Incremental encoder HTL compatible inverted Connection KAB1,5M = Cable output, length 1.5 m (standard) Cable fixing M4 = M4 cable fixing SB0 = Cable clip Order Example: WS100AL - 2000 - 10 - IE24HI - KAB1,5M - M4 44 CAT-WS-E-05 www.asm-sensor.com ASM Model WS100 with incremental encoder output Cable forces typical at 20 °C Range [mm] Maximum pull-out force [N] Minimum pull-in force [N] 2000 3500 5.2 6.2 2.8 3 Outline drawing WS100 - 2000 Outline drawing WS100 - 3500 Dimensions informative only. For guaranteed dimensions consult factory. ASM www.asm-sensor.com CAT-WS-E-05 45 Output Specifications R1K and 10V for WS position sensors Voltage divider R1K Potentiometer Excitation Voltage 32 VDC max. at 1 kW (input power 1 W max.) Potentiometer Impedance 1 kW ±10% ±25 x 10-6/ °C full scale Depends on measurement range, individual sensitivity of sensor specified on label Approx. 3% ... 97% of full range -20 ... +85 °C Thermal coefficient Sensitivity Voltage Divider Utilization Range Operating Temperature Signal diagram + Vin Note: The potentiometer must be connected as a voltage divider. The input impedance of the following processing circuit should be 10 MW min. + Vout GND Signal conditioner 10V Voltage output Excitation Voltage Excitation Current Output Voltage Output Current Output Load +18 ... +27 V DC non stabilized 20 mA max. 0 ... +10 V DC 2 mA max. > 5 kW ±50 x 10-6 / °C full scale Reverse polarity, short circuit 0,5 mVRMS -20 ... +85 °C According to EN 61326:2004 Stability (Temperature) Protection Output Noise Operating Temperature EMC Excitation + Signal diagram 10V Excitation GND Signal + 0...10 V Signal GND Signal Wiring Output signals R1K + Vin GND + Vout Connection Mating Connector 10V Excitation + Excitation GND Signal + Signal GND Connector pin no. White Brown Green Yellow 1 2 3 4 View to solder terminals CONN-DIN-8F-W ASM Cable color www.asm-sensor.com CONN-M12-8F-G CAT-WS-E-05 57 Output Specifications 420A and 420T for WS position sensors Excitation Voltage Signal conditioner 420A Current output (2 wire) +12 ... 27 VDC non stabilized, measured at the sensor terminals 35 mA max. 4 ... 20 mA equivalent to 0 ... 100% range ±100 x 10-6 / °C full scale Reverse polarity, short circuit 0.5 mVRMS -20 ... +85 °C According to EN 61326:2004 Excitation Current Output Current Stability (Temperature) Protection Output Noise Operating Temperature EMC Signal + Signal Diagram 420A 4...20 mA Signal Conditioner 420T Current output (3 wire) Signal – Excitation Voltage Excitation Current Load Resistor +18...+27 V DC non stabilized 40 mA max. 350 W max. 4 ... 20 mA equivalent to 0 ... 100% range ±50 x 10-6 / °C full scale Reverse polarity, short circuit 0.5 mVRMS -20 ... +85 °C According to EN 61326:2004 Output Current Stability (Temperature) Protection Output Noise Operating Temperature EMC Signal diagram Excitation + 420T Signal + 4...20 mA Signal Wiring Output signals 420A Signal + Signal – Connection Mating Connector Excitation GND 420T Excitation + Excitation GND Signal + CAT-WS-E-05 Connector pin no. White Brown Green 1 2 3 View to solder terminals CONN-DIN-8F-W 58 Cable color www.asm-sensor.com CONN-M12-8F-G ASM Output Specifications IE24LI and IE24HI for WS position sensors IE24LI and IE24HI incremental IE24LI IE24HI 5 V DC ±10 % 10 … 30 V DC 100 mA max. 200 kHz Push-pull and inverted signals 10 mA max. Depending on the excitation voltage ±20 x 10-6 / °C f.s. (sensor mechanism) -20 … +85 °C Short circuit According to EN 61326:2004 Excitation voltage Excitation current Output frequency Output Output current Output voltage Stability (temperature) Operation temperature Protection EMC Output signals Excitation + Excitation GND Signal A Encoder Signal A IE24LI IE24HI Signal B Signal B Signal Z (reference pulse) Signal Z Output circuit and recommended processing input circuit Output signals Signal wiring Connection Mating connector 60 CAT-WS-E-05 Cable color Connector pin no. Brown White Grey Green Pink Yellow Blue Red 1 2 3 4 5 6 7 8 CONN-DIN-8F-W CONN-M12-8F-G Excitation + Excitation GND Signal B (A + 90°) Signal A Signal B Signal A Signal Z (reference pulse) Signal Z View to solder terminals www.asm-sensor.com ASM