A9240-A-004-485 13.56MHz 4-Port RFID Reader System Compatibility The A9240-A-004-485 reader system is designed for ISO 15693 standard. RFID tag of various manufacturers can be used to offer the most cost saving application integration. AMIC’s A9240-A-004-485 reader system is a high performance and cost effective Feature 13.56MHz contactless reader system designed to compliant with ISO 15693 ISO-15693 protocol standard standard. Operating distance up to 100 cm (depends on transponder and antenna types) Software Download for Customization Serial communication speed 115.2 kbps The A9240-A-004-485 reader system 4 sets of external 50 ohm offers software download capability antennas where system integrator can modify Single power supply existing functionalities or add new Complete evaluation kit available features. Applications Antenna Flexibility Logistics Access control The A9240-A-004-485 reader system Object tracking works with external 50ohm antenna of Asset management different sizes. Identification Antenna can be located at some distance from the reader unit for easy installation and best environment adaptation. A selection of antennas with varying sizes is available for different operating distances requirements. Rev 1.0 080305 A9240-A-004-485 13.56MHz 4-Port RFID Reader System System Specification Standard ISO 15693 Operating Frequency 13.56MHz Storage Temperature -10°C to + 50°C Operating Temperature 0°C to + 50°C Operating Distance Up to 100cm (Depends on the type of antenna and transponder) Host Interface RS-485 Host Communication Baud Rate 115.2 kbps Power Source +19VDC Standby Current Consumption 0.3A Average Current Consumption 0.8A Antenna (Sold Separately) 4 sets of 31cm x 10cm (typical) Antenna connector Reversed TNC type Block Diagram * AMIC reserves the rights to change product specification without notice AMIC Technology Corp. No. 2, Li-Shin 6 Road, SBIP, Hsinchu 300, Taiwan, ROC Rev 1.0 Fax: +886-3-567-9977 Tel: +886-3-567-9966 080305