A9262-A-000 13.56MHz RFID Reader Module Feature ISO-15693 protocol standard Build-in antenna RS-232 host interface for easy integration Single +5VDC power supply Compatibility with Windows 2000 / XP / Vista. AMIC’s A9262-A-000 reader module is a high Small form factor ISP for future upgrade performance and small formfactor 13.56MHz contactless reader system with integrated antenna. It is designed specifically for embedded application where automated tag Applications ID detection is required. Embedded applications Factory automation RFID tag read/write Asset management A9262-A-000 supports full ISO-15693 Inventory management functionalities for both read and write Healthcare instrumentation Compatibility operations. Rev 1.2 100318-1.2 A9262-A-000 13.56MHz RFID Reader Module System Specification Standard ISO 15693 full function and ISO 14443A UID only Operating Frequency 13.56MHz Operating Temperature 0°C to +60°C System Interface type RS-232 Reader Module Cable Header 1.50mm wire to board header SMD 90 type (connector pins are perpendicular to PCB surface) Host Communication Baud Rate 115200 bps Buzzer Optional Power Source +5.0V DC 10% Antenna Built-in Dimensions Not to exceed 50.5 x 34.0 x 9.0mm (L x W x H) Host Connector Pin Definition Pin Number Description 1 RX RS-232 RX 2 TX RS-232 TX 3 IO1 Reserved 4 IO2 Reserved 5 VDD +5 Voltage Input 6 GND Ground AMIC Technology Corporation. No. 2, Li-Shin 6 Road, SBIP, Hsinchu 300, Taiwan, ROC Rev 1.2 Fax: +886-3-567-9977 Tel: +886-3-567-9966 100318-1.2