“LAN-MATE” SERIES SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS P/N: KLU1S041X LF Page:1/2 Feature z z z RJ-45 needs to be matched FCC standard. Complies with requirement of IEEE 802.3u standards. RJ-45 connector integrated with transformer/impedance resistor/high voltage capacitor. Size same as RJ-45 connector to save PCB board space. Reduced EMI radiation to improve EMI performance. Design for 10/100 BASE transmission over UTP-5 cable. Compliance with ROHS requirements. Operating temperature range: 0℃ to +70℃. Storage temperature range: -25℃ to +85℃. z z z z z z Electrical Specifications @ 25°C Part Turns Ratio OCL (uH Min) (±5%) @ 100KHz/0.1V Number TX with 8mA DC Bias RX KLU1S041X LF 1CT:1CT 1CT:1CT CW/W L.L (pF Max) (uH Max) Insertion Loss (dB Max) HI-POT (Vrms) 0.3-100MHz 350 56 0.4 -1.15 1500 Continue Part Number Return Loss Cross talk CMR (dB Min) (dB Min) (dB Min) 30MHz 40MHz 50MHz 60MHz 80MHz 0.3-30MHz 30-60MHz 60-100MHz 1-30MHz 30-60MHz 60-125MHz KLU1S041X LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 Schematic www.bothhandusa.com [email protected] A5(12/02) “LAN-MATE” SERIES SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS P/N: KLU1S041X LF Page:2/2 Mechanical 1. Plastic Material : Thermoplastic (UL 94V-0), Black Housing 2. Metal Shield : Brass, 20u"inches thick Nickel 3. Spring Wire : Phosphor bronze with selective gold plating 4. Solder Pin : 0.5x0.35mm, SUS430 with solder Plated 5. Durability : 750 Mating cycles Min. PCB Layout Mounting Hole(Top View) www.bothhandusa.com [email protected] A5(12/02)