BOTHHAND “LAN-MATE” SERIES DESCRIPTION : 1000 BASE-T RJ45 1 x 1 INTEGRATED USA MAGNETICS CONNECTOR P/N:KLA1S109-43 LF Feature l l l l l l l l l l RJ-45 needs to be matched FCC standard. Complies with requirement of IEEE 802.3ab standards. RJ-45 connector integrated with transformer/impedance resistor/high voltage capacitor. Size same as RJ-45 connector to save PCB board space. Reduced EMI radiation to improve EMI performance. Design for 1000 BASE transmission over UTP-5 cable. Compliance with ROHS requirements. Operating temperature range: 0℃ to +70℃. Storage temperature range: -25℃ to +85℃. Recommended panel Part Number Standard LED Forward*V(Max) 3 YELLOW 2.6V 4 GREEN 2.6V (TYP) 2.1V 2.2V *with a forward current of 20mA Electrical Specifications @ 25°C Part Turns Ratio OCL (uH Min) Cross talk (±5%) @ 100KHz/0.1V (dB Min) Number TX KLA1S109-43 LF 1CT: 1CT HI-POT (Vrms) RX with 8mA DC Bias 0.3-30MHz 30-60MHz 60-100MHz 1CT: 1CT 350 -40 -35 -30 1500 Continue Insertion Part Loss Number (dB Max) KLA1S109-43 LF Return Loss CMR (dB Min) @ Load 100Ω (dB Min) 1-100MHz 1-30MHz 30-40MHz 40-50MHz 50-80MHz 1-30MHz 30-60MHz 60-125MHz -1.0 -16 -13.5 -11.5 -10 -30 -25 -20 Schematic www.bothhandusa.com Page :1/2 [email protected] A5(12/05) “LAN-MATE” SERIES DESCRIPTION : 1000 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR BOTHHAND USA P/N:KLA1S109-43 LF Mechanical 1. Plastic Material : Thermoplastic (UL 94V-0), Black Housing 2. Metal Shield : Brass, 20u" inches thick Nickel 3. Spring Wire 4. Solder Pin Phosphor bronze with 0.1524 *10 m gold plated & : 0.45mm Dia. -6 1.524*10 m thick Nickel : 0.5x0.35mm, SUS430 with solder Plated 5. Durability : 750 Mating cycles Min. -6 PCB Layout Mounting Hole(Top View) www.bothhandusa.com Page :2/2 [email protected] A5(12/05)