5603 Wireless Handset

jfqbi
RSMP=táêÉäÉëë=e~åÇëÉí
fmJab`q=póëíÉã=EdäçÄ~äF
rëÉê=dìáÇÉ
NOTICE
The information contained in this document is believed to be accurate in all respects but is not warranted
by Mitel Networks™ Corporation (MITEL®). The information is subject to change without notice and should
not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its
affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions
of this document or new editions of it may be issued to incorporate such changes.
No part of this document can be reproduced or transmitted in any form or by any means - electronic or
mechanical - for any purpose without written permission from Mitel Networks Corporation.
Trademarks
Mitel is registered trademark of Mitel Networks Corporation.
Other product names mentioned in this document may be trademarks of their respective companies and
are hereby acknowledged.
IP-DECT System (Global)
Mitel 5603 Wireless Handset User Guide
February 2010
®,™ Trademark of Mitel Networks Corporation
© Copyright 2010, Mitel Networks Corporation
All rights reserved
ii
Table of Contents
About Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Description of Your Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Contacting Emergency Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tips for your Comfort and Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Exposure to Radio Frequency Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chemical Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Icons and Text in the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Keys and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Off-hook Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
On-hook, and On/Off Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Navigation Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Sound off Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Key Lock, and Upper/Lower Case Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Soft Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Volume Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Alphanumeric Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Customizing Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Switch the Handset On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turn the Audible Signal On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Lock/Unlock the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Lock/Unlock the Keypad in Idle Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Lock/Unlock the Keypad during a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Lock/Unlock the Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Make a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Pre-Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Dial a Number from the Call list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Dial a Number from the Local Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Dial a Name from the Central Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Dial a Number from the Company Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Answer a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Answer a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
End a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
iii
Table of Contents
Adjust the Volume during a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Open Contacts during the Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Turn the Microphone on/off during a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Start a New Call during Conversation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Call Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Answer Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Call Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Advanced Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Call Forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Call Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Do Not Disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Direct Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Group Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Loudspeaker Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Receive a Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Check the Voice Mail Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Navigate the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Enter/Exit the Menu Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
In Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Call Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Call List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Missed Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Call Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Contact Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Call Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
iv
Table of Contents
Edit Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Delete Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Central Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Sound and Alert Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Select Headset Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Time & Date Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Phone Lock settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Answering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Change the Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Change Owner ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
In Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Advanced Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Admin Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Clear Lists in Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
System Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Software Upgrade and Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Operation Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Accessibility and Voice Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Maintenance of Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Battery Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Replace the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Attach the Hinge-type Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Attach the Swivel-type Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Easy Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Before Starting Easy Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Easy Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
v
5603 Wireless Handset User Guide
vi
5603 Wireless Handset User Guide
About Your Phone
The Mitel 5603 Wireless Handset is a feature-rich handset designed to operate in conjunction
with an IP-DECT base station and the 3300 ICP. It is ideal for users who need mobile voice
and messaging functions.
Figure 1: Mitel 5603 Wireless Handset
Caution:The Handset/Headset must be fully charged before starting regular use.
1
5603 Wireless Handset User Guide
Description of Your Handset
1
Earpiece speaker
2
Soft keys
The three soft keys is used with GUI, that is, the functions of each Soft key is indicated by text
in the display just above the keys.
3
Off-hook key
To answer a call, to pre-dial a number, and as a short cut to the Call list.
4
Voice mail access*
A quick access to the handset’s Voice mail.
5
Key lock and Upper/Lower case
Combined key lock and Upper/Lower Case.
6
Space
To add space between text.
7
Microphone
8
Sound off key
To turn on/off audible signals in idle mode, silencing the ring signal at incoming call, and to turn
the microphone on/off during a call.
9
Tactile indicators
There are two tactile indicators to indicate the centre of the key pad.
10
On-hook and On/Off key
Combined button; to end a call, to return to standby mode, and to switch the handset on/off by
long press.
11
Four-way navigation key
Navigation key with Left, Right, Up, and Down.
During a call, the keys Up and Down are used to increase and decrease the speaker volume,
respectively.
12
Display
The B/W display is 28 mm wide and 35 mm high with backlighting.
13
Headset connector
The headset connector is for connecting a headset. The connector is protected against dust by
using the headset connector cover.
14
LED
Indicates incoming call, messaging, low battery, and charging.
*System dependent feature
2
5603 Wireless Handset User Guide
Features and Functions
IMPORTANT:The handset may retain small magnetic objects around the mouth cap or
earcap region.
Case
The plastic cover parts are made of durable PC/ABS material.
Antenna
The antenna is integrated inside the handset.
Loudspeaker
The handset has a separate loudspeaker for the loudspeaking function. It is placed on the back
side of the handset.
Microphone
The microphone is placed on the front bottom side of the handset.
Clip
There are two different belt clip options to the handset; a hinge-type clip (standard) or a
swivel-type clip. See “Attach the Hinge-type Clip” on page 49, or “Attach the Swivel-type Clip”
on page 49. Use the clip to attach the handset to a belt or similar. It is also possible to use the
handset without any clip on.
Battery
The battery is a rechargeable Li-Lon battery, placed under a battery cover. See “Replace the
Battery” on page 48.
The battery is fully charged within four hours. See “Charge the Battery” on page 48.
3
5603 Wireless Handset User Guide
Chargers
002
Desktop Charger
Advanced
Basic
Figure 2. Desktop chargers.
There are two desktop chargers available, one basic that will only charge the handset, and one
with advanced functionality to download new software and to synchronize parameters. The
handset is fully operational while placed in the charger.
The charger is delivered with a plug-in power supply and is connected into an ordinary wall
socket. For more information, see Installation and Operation Manual, 5603/4 Programmer..
Note: Only use the charger within the temperature range of +5° C – +40° C.
Caution: Only use the provided power supply, see the 5603/5604 Programmer Installation
and Operation Manual.
Rack Charger
The Charging Rack is used for charging several handsets, to synchronize parameters, and for
software download. See the 5603/4 Rack Charger Installation and Operation Manual.
Contacting Emergency Services
This handset, like any wireless phone, communicates using radio signals. As with any wireless
phone, you may not be able to establish a connection under all conditions, therefore, you should
not rely solely on a wireless telephone for essential, emergency communication. The key lock
feature disables the handset keypad and prevents the accidental dialing of numbers that may
result in nuisance calls. It also prevents accidental calls to emergency services numbers like
911, 999, or 112.
To disable the key lock feature, press the
key and then press Select.
Currently, mobile IP phones do not support Enhanced 911 (E911) operation. If emergency
services are required, it is necessary to keep the system administrator and location database
up-to-date.
4
5603 Wireless Handset User Guide
Tips for your Comfort and Safety
Don't cradle the handset!
Prolonged use of the handset can lead to neck, shoulder, or back discomfort, especially if you
cradle the handset between your ear and shoulder. If you use your phone a lot, you may find
it more comfortable to use a headset. See the section on headset usage elsewhere in this guide
for more information.
Protect your hearing
Your phone has a control for adjusting the volume of the handset receiver or headset. Because
continuous exposure to loud sounds can contribute to hearing loss, keep the volume at a
moderate level.
Frequency Range
The handset is a radio transmitter and receiver. When it is on, it receives and sends out radio
frequency (RF) energy. The handset operates on different frequency ranges depending on
market and employs commonly used modulation techniques:
•
EU: 1880 - 1900 MHz
•
USA: 1920 - 1930 MHz
•
LA: 1910 - 1930 MHz
Exposure to Radio Frequency Signals
This device complies with FCC SAR limit of 1.6 W/kg. The maximum SAR value measured
when used at the ear is 0.067 W/kg. The telephone has also been tested when worn on the
body using belt clip, maximum measured SAR value in this configuration is 0.04 W/kg.
Environmental Requirements
•
Only use the handset in temperatures between 0C to +40C (32F to 140F).
•
Avoid exposing the handset for direct sunlight or close to other heat sources.
•
Keep the handset away from excessive heat and moisture.
•
Do not expose the handset to open flame.
•
Keep the handset away from strong electromagnetic fields.
Chemical Resistance
The alpha and numeric characters printed on the exterior of the handset have been tested and
found resistant to chipping, fading or wearing off when the handset is treated with common
cleaners and disinfectants or perspiration. The following chemicals have shown no harmful
effect:
•
3% Hydrochloric Acid
5
5603 Wireless Handset User Guide
•
M-alcohol (70% Methylated Ethanol)
•
60% Chlorhexidin 0.5mg/ml
Acetone can be damaging to the plastic casing of the handset and should not be used.
Icons and Text in the Display
All functions and settings available to the user are shown as icons and text in the display. The
icons and text in the display indicate functions and settings to which you have access. The
display normally displays date and time, the Owner ID and handset number. The Owner ID can
manually be set by the user.
11:00
Status bar
05/12/2007
Header bar
System A
709040
Scroll bar
Soft key bar
003
Select
Active area
Figure 3: Example of a display configuration in standby mode
The top row (Status bar) is used for icons which give the user information about signal strength,
missed call, phone lock, key lock, sound off, time and battery status. This row is always visible
in all screens.
The next row (Header bar) displays the current date, headset connection, and system
connection.
The next rows (Active area) are used for information such as the name of the system to which
the handset is connected to. A user identity provided from the system and/or an Owner ID can
also be displayed if configured in the Settings menu. This is also the area for dialog window
text, for example "missed calls" or "received messages".
The bottom row (Soft key bar) is used for Soft keys that are located just beneath the display.
See “Soft Keys” on page 9.
The (Scroll bar) is placed to the right of the "Active area". It becomes visible when a menu
screen has more than six menus.
Icons
“Signal strength” icon is visible in the upper left corner. The staples shown in
display depends on the signal strength.
6
5603 Wireless Handset User Guide
“Full battery” icon is displayed in upper right corner.
The "Low battery" icon is displayed when the battery has 10% or less remaining
capacity left. In addition; a warning signal sounds every minute, the LED flashing
orange, and the dialog window "Battery low. Charge now!" appears.
The "Empty battery" icon is flashing when the battery has 5% or less remaining
capacity left. In addition; a warning signal sounds every second, the LED flashing
red, and the dialog window "Battery empty. Shutting down." appears.
“Sound off” icon is displayed when the Sound off key is pressed, and when the
handset, with the in charger function "Sound off" enabled, is placed in a charger.
"Microphone off" icon indicates a silenced microphone. It is displayed after a long
press on the Sound off key during a call.
“Loudspeaking” icon is displayed in the soft key bar during a call. Pressing this icon
will turn on the loudspeaker.
“Loudspeaking off” icon is displayed after the soft key for Loudspeaking icon has
been pressed. Pressing this icon will turn off the loudspeaker.
“Key lock” icon indicates a locked keypad.
"Locked entry" icon indicates that the contact cannot be edited or deleted by the
user.
"Phone lock" icon indicates a locked handset.
“Headset” icon indicates that a corded headset is connected to the handset.
"Outgoing call” icon is added to all outgoing calls in the call list.
“Incoming call” icon is added to all answered calls in the call list.
“Missed call” icon is added to all missed calls in the call list.
“Missed call” icon is added in the status bar. This icon remains until the "Call list" is
opened.
"PDM/WSM communication" icon is visible when handset is communi-cating with
PDM/WSM via advanced charger.
"Voice mail" icon indicates that new voice mail has been received.
7
5603 Wireless Handset User Guide
Menu icons
The ”Contacts” menu contains all names/numbers in the local phonebook. In
addition, a company phonebook with up to 500 entries can be downloaded to the
phone via the PDM. It is also possible to access a central phonebook* from the
"Contact" menu.
The “Calls” menu contains call lists, call time, and call services*. Call services is
configured in the PDM.
The “Settings” menu contains personal handset settings such as changing the
ringer volume, selecting language, etc.
* This feature is system dependent.
Keys and Buttons
Some keys have different functions depending on the state of the phone, or the length of time
that you press a key.
Short press = Press and release the key in less than one second.
Long press = Press and hold down the key for longer than one second and then release.
8
5603 Wireless Handset User Guide
Off-hook Key
This key is used for connecting calls. One short press in standby mode opens
the call list.
On-hook, and On/Off Key
This key is used for disconnecting calls and returning to main screen.
A long press in standby mode will switch the handset on/off.
Navigation Key
Use this key to step in the menu, and when working in text mode.
,
,
, and
are used for stepping left/right and up/down in the menu.
Sound off Key
A long press on the key in idle mode changes between ring signal on/off. At
incoming call, a long press on the key silencing the ring signal. During a call, a
long press on the key changes between microphone on/off.
Key Lock, and Upper/Lower Case Key
This key is to lock the keypad in combination with the Soft key "Lock". It is also
for switching between upper/lower case and digits.
Soft Keys
004
Menu
Soft keys
Figure 4: Examples of Soft Keys
The three Soft keys are located just beneath the display and the functions of each Soft key is
indicated by text in the display just above the keys.
Volume Button
and
on the Navigation key are used for increasing/decreasing the earpiece, headset,
and the loudspeaker volume.
9
5603 Wireless Handset User Guide
Alphanumeric Keys
.,?!-‘”1
abcàâæç2
defèéêë3
jkl5
ghiîï4
mnoñôöœ6
pqrs7
wxyz9
Space + * 0
#
005
tuvû8
Figure 5: Available characters
Note: Depending on the selected menu language, other characters can be available.
This means that the character order can differ from the table above.
In standby mode, and number input mode
•
A short press on a key enter the digits “0” - “9” and the characters * and #.
•
Enter a pause in number input mode by a long press on the # -key. A pause is indicated
by a "P" in the display.
•
A long press on the * - key changes the tone sender on.
Tone sender on is indicated by a "T" in the display.
•
The keys "0", "2" - "9" can be used for speed dialing. Press and hold any of the keys to
access a contact beginning with a specific letter. For example, to access a contact beginning
with the letter "A", press and hold the key "2" and then press "Call" to speed dial.
In text input mode
10
•
A short press on a key 0-9, displays the first available character on that specific key. The
marked character is selected after a timeout, or when another key is pressed.
•
To change to upper/lower case, press the * key before entering the character.
The * key can also be used to display only the digits.
•
To add space in the text, make a short press on key 0.
•
The first character entered when adding/editing a name in the Contacts menu, will be an
upper level character followed by lower level characters, unless the * key is pressed before
entering the character. To switch between Abc, ABC, abc, and 123 the * key is pressed.
•
A long press on the #-key displays special characters.
5603 Wireless Handset User Guide
Headset
A headset is recommended if the handset is frequently used, and/or the user want to have both
hands free. The headset comes in two versions; microphone integrated in the cable and
microphone on a boom.
In order to achieve optimal audio quality with the different headset types it is recommended to
select the corresponding headset profile.
The default setting is microphone on a boom, that is, the audio is optimized for using a headset
with microphone on a boom. The headset profile can be changed in the menu by do as follows:
1. Enter the menu by pressing the “Menu” soft key.
2. Select "Settings".
3. Press "Select".
4. Select "Headset".
5. Select the corresponding headset profile from list, that is, "Mic on boom" or "Mic on cable".
6. Press "Select".
If the preconfigured headset profiles do not match the headset in use, or the audio performance
is bad, it is possible to configure an own headset profile. This is done in the PDM, see the Mitel
5603 Wireless Handset Configuration Manual. If an own profile is configured in the PDM, it will
be selectable in the handset menu.
11
5603 Wireless Handset User Guide
Customizing Your Phone
Switch the Handset On/Off
The handset is switched off:
1. Press and hold On-hook key
.
When pressing the On-hook key, the handset will vibrate and the display lights up.
2. A dialog window "Switch on" is displayed. Confirm by pressing "Yes".
The handset is in idle mode:
1. Press and hold On-hook key
.
2. A dialog window "Switch off" is displayed. Confirm by pressing "Yes".
Turn the Audible Signal On/Off
A long press on
The
in idle mode, changes between ring signal on/off.
icon indicates a silenced handset.
Lock/Unlock the Keypad
Lock/Unlock the Keypad in Idle Mode
To prevent accidentally pressing keys and making a call, the keys can be locked.
Lock Keypad
Press
and then "Lock".
Unlock Keypad
Press
and then "Yes".
Note: It is possible to answer/close an incoming call while the keypad is locked. If
configured in the PDM, it is also possible to call an emergency call while the keypad is
locked. See the Mitel 5603 Wireless Handset Configuration Manual.
Lock/Unlock the Keypad during a Call
To prevent accidentally pressing keys, the keys can be locked during a call. This can be useful
when a headset is used and the handset is attached to a pocket or belt.
12
5603 Wireless Handset User Guide
Lock keypad
1. Press
.
2. Press "Lock".
Unlock keypad
1. Press
2. Press "Yes".
Lock/Unlock the Handset
1. Press "Menu".
2. Select "Settings"
.
3. Select “Locks".
4. Select “Phone lock”.
5. Select "Auto phone lock".
6. Select "On", "On in charger", or "Off".
Note: If configured in the PDM, it is possible to call an emergency call while the handset
is locked. See the Mitel 5603 Wireless Handset Configuration Manual.
13
5603 Wireless Handset User Guide
Making and Answering Calls
Make a Call
Pre-Dial
1. Enter the number.
2. Press
or "Call" to get the line. The number is shown on the display while dialling.
If needed, press "Clear" to erase the number. By using the Navigation key it is possible to step
and add/delete a digit in the middle of a number. It is possible to turn on the tone sender in a
pre-dialled number by making a long press on
.
Dial a Number from the Call list
1. Press
when in idle mode; or press "Menu", select "Calls" and then select "Call list".
2. Select a number.
3. Press
or "Call" to dial. The number can be edited before the call is started. Press
"More" and select "Edit number".
Dial a Number from the Local Phonebook
1. Press the "Menu" Soft key.
2. Select "Contacts".
3. Select "Call contact".
4. Select contact from list, or search name/number by entering characters in the "Search" field.
5. Press
or "Call" to make the call.
Note: It is also possible to access the Local phonebook by pressing the soft key
idle mode.
Dial a Name from the Central Phonebook1
1. Press the "Menu" Soft key.
2. Select “Contacts”.
3. Select "Central phonebook".
4. Select "Search by name".
5. Enter the first name and/or last name, the whole name does not have to be entered.
6. Press “Search”.
7. Press
or the"Call" key to make the call.
1. This is a system dependent function.
14
in
5603 Wireless Handset User Guide
Dial a Number from the Company Phonebook
1. Press the "Menu" Soft key.
2. Select "Contacts".
3. Select "Call contact".
4. The local and company phonebook appears in the same list but the company names are
indicated by a “Locked entry” icon in front of the name. Select contact from list, or search
name/number by entering characters in the "Search" field.
5. Press
or the "Call" key to make the call.
Note: It is also possible to access the Company phonebook by pressing the soft
key
in idle mode.
Answer a Call
The flashing LED, accompanied by a ring signal and/or a vibrating handset, give you notice of
a call. Ring signal and vibrator can be disabled. The calling party’s handset number or name
is shown. The name will be shown if the calling party’s handset number is stored in the local
phonebook or if calling line information is available. Press the Off-hook key to answer the call.
When a headset is connected to the handset, the answering button on the headset can be used
to answer the call.
Other answering methods can also be set in the Settings menu, see “Settings Menu” on page 36.
The answering methods are; "Automatically" and "Loudspeaking".
When “Automatically” is enabled, all incoming calls will be connected automatically.
Answer a Call
When the signal sounds press
to answer the call, or press the soft key
to answer the
call in loudspeaking mode. The name/number of the calling party is displayed if calling line
information is available.
End a Call
Press
to end the call. The duration of the call is shown in the display. The total time of the
call can also be retrieved from the Calls menu > Call time.
15
5603 Wireless Handset User Guide
During a Call
Note: Some of these functions are system dependent. The parameters are set up in the
Portable Device Manager (PDM), see the Mitel 5603 Wireless Handset Configuration
Manual and Portable Device Manager (PDM) Installation and Operation Manual.
If configured in the PDM/WSM, it is possible to call an emergency call while the handset/ keypad
is locked. During the ongoing emergency call, the soft key "More" and the soft key "R" are
disabled.
Adjust the Volume during a Call
On the navigation key, press
and
to increase and decrease the volume, respectively.
The handset will now store and keep the new volume level.
Open Contacts during the Call
1. Press the "More" Soft key during the call.
2. Select "Contacts".
3. Press "Select".
4. Select "Call contact" for searching a local or company phonebook contact, or select "Central
phonebook" for searching a central phonebook contact.
5. Press "Select".
6. Select or search contact.
Note: It is possible to call the selected contact by pressing "Call". When calling the
contact, the first call will be put on hold. See also “Start a New Call during Conversation”
on page 17.
Turn the Microphone on/off during a Call
1. Press the "More" Soft key during the call
2. Select "Microphone off"
3. Press "Select".
The
icon indicates a silenced microphone. This means that the other part in an ongoing
call cannot hear you. To turn the microphone back on, do as follows:
1. Press the "More" Soft key during the call.
2. Select "Microphone on".
3. Press "Select".
It is also possible to turn the microphone off/on by a long press on
16
.
5603 Wireless Handset User Guide
Start a New Call during Conversation
1. Press the "More" Soft key during the call.
2. Select "New Call"1.
3. Press "Select".
4. Enter number, or press
5. Press
to access the phonebook.
.
1. Visible if defined in the PDM.
17
5603 Wireless Handset User Guide
Call Handling
During a call, you may need to use the following features: Hold, Transfer, Conference, Call
Swap, Callback, Call Park, and so forth.
You access these features by pressing the More softkey during a call. This displays the In Call
menu (see below).
You can also use these features by pressing the R key on the handset during a call. The table
below lists the In-Call Menu features and the associated feature access code method.
In-Call Menu under More
Associated Feature Access Code
Contacts
Microphone off
18
New Call
R
Hold/Retrieve
R
Release
R4
Call Swap
R2
Join
RR + *80
Call BackI
5
Answer Call Waiting
R2
Call Park
RR + *7#
5603 Wireless Handset User Guide
Hold
1. During a call, press the More softkey.
2. Select Hold/Retrieve to put the call on hold.
To retrieve the Held Call
1. Press the More softkey
2. Select Hold/Retrieve to retrieve the call.
Transfer
1. During the call, press the More softkey.
2. Select New Call.
3. Dial the number to which you want to transfer the call and then press the Call softkey.
4. Do one of the following:
•
to make a blind transfer, select Release to hang up and connect the other two parties.
•
to make a supervised transfer, wait for an answer, announce the transfer, and then
select Release to hang up and connect the other two parties.
•
to terminate the transfer and return to the held call, press More and then select Call
Swap.
19
5603 Wireless Handset User Guide
Conference
To conference with another party during an active call:
1. During a call, press the More softkey.
2. Select New Call to put the current call on hold.
3. Dial the number of the third party.
4. Wait for an answer.
5. Press More and then select Join to conference all the parties together.
Answer Call Waiting
While on a call, you hear a call waiting beep.
1. Press the More softkey.
2. Press Answer Call Waiting to answer the incoming call.
Callback
Callback lets you request that the system notify you when a busy extension becomes free.
1. When a number/extension is busy, press the More softkey.
2. Select Call Back to set up the callback.
3. Your extension will ring when the called extension becomes free and automatically dial the
extension back.
Call Park
The Call Park feature allows you to place a call in a special hold state.You, or someone else,
can then retrieve the call from any extension in the system. After parking the call, the system
can automatically connect you to paging equipment so that you can announce the call to the
requested party.
To park an active call:
1. During the call, press the More softkey.
2. Select Call Park.
3. Dial the directory number on which to park the call
4. Inform the called party of the waiting call.
To retrieve a parked call:
1. Press Call -> Call Services.
2. Select Call Park - Retrieve and enter the directory number on which the call is parked.
20
5603 Wireless Handset User Guide
Advanced Features
The following features are available from the Calls -> Call services menu:
•
Call Forward
•
Call Forward Cancel
•
Do Not Disturb
•
Do Not Disturb Cancel
•
Call Pickup
•
Call Park Retrieve
•
Direct/Group Page
•
Loudspeaker Page
To access the Call Services menu:
1. Enter the menu by pressing the Menu soft key.
2. Select
in the menu.
3. Press Select.
21
5603 Wireless Handset User Guide
Call Forward
To set Call Forwarding:
1. From the Call -> Call Services menu, select Call Forward.
2. Enter the extension number to which you want to forward your calls.
3. Press Call.
4. Listen for a confirmation tone and then hang up.
To cancel Call Forwarding:
1. From the Call -> Call Services menu, select Call Forward Cancel.
2. When you hear a re-order tone, press
to hang up. Forwarding is cancelled.
Call Pickup
To answer a call that is ringing at another station in your Pickup Group:
1. From the Call -> Call Services menu, select Call Pickup.
2. Answer the call.
Do Not Disturb
To activate Do Not Disturb:
1. From the Call -> Call Services menu, select Do Not Disturb.
2. When you hear a re-order tone, press
to hang up. Do Not Disturb is activated.
To deactivate Do Not Disturb:
1. From the Call -> Call Services menu, select Do Not Disturb Cancel.
2. When you hear a re-order tone, press
to hang up. Do Not Disturb is deactivated.
Direct Page
Direct Paging allows you to page a party through the party’s handsfree speaker.
1. Press the More softkey.
2. Select Direct/Group Page.
3. Dial the extension number.
4. Announce the page.
22
5603 Wireless Handset User Guide
Group Page
Group Paging allows you to page a group of telephones through their built-in speakers.
1. Press the More softkey.
2. Press Direct/Group Page.
3. Do one of the following:
•
To page your prime page group, press #.
•
To page a specific page group, dial the page group directory number.
4. Speak to the dialed party after the tone.
Loudspeaker Page
1. Press the More softkey.
2. Press Loudspeaker Page.
3. Dial the paging zone number, if required.
4. Wait for ringback and announce the page.
Note: Ask your Administrator for the paging zone number.
23
5603 Wireless Handset User Guide
Voice Mail
Receive a Voice Mail
When a new voice mail is received, the message alert signal sounds, and the voice mail icon
is displayed in the status bar. The new voice mail notification is also displayed in a dialog
window.
Check the Voice Mail Inbox
Check the voice mail(s) by pressing "Call" from the dialog window. If "Close" is selected, it is
possible to dial the Voice Mail by a long press on digit key "1" when in standby mode.
Follow the given instruction in the Voice Mail.
Note: In case the following message is shown: "Voice mail number not defined", the
voice mail number needs to be configured to the voice mail button. Contact your system
administrator.
24
5603 Wireless Handset User Guide
Contacts
The handset has a local phonebook with 250 entries, where names and numbers freely can
be added, deleted, and edited by the user. The phonebook lists all names in alphabetical order,
where three numbers can be added for each contact, that is, work number, mobile number, and
other number.
For more information on how to add, edit, or delete a contact, see “Contact Menu” on page 33.
In addition, a company phonebook with up to 500 entries can be downloaded to the phone via
the PDM, see “Software Upgrade and Additional Features” on page 44. The company
phonebook name and numbers cannot be edited or deleted by the user. The phonebook lists
all names in alphabetical order.
The local and company phonebook appears in the same list but the company contacts are
indicated by a “Locked entry” icon in front of the name. The company contact includes work
number only. See “Dial a Number from the Company Phonebook” on page 15 for more
information. The local and company phonebook can also be accessed by pressing the soft key
in idle mode.
It is also possible to access a central phonebook1, see “Dial a Name from the Central
Phonebook” on page 14. The user then sends a request to a messaging server with the first
characters entered, and the messaging server will return a list of names and numbers that
matches the search.
1. This is a system dependent function.
25
5603 Wireless Handset User Guide
Navigate the Menu
13:00
Contacts
Calls
Select
Back
006
Settings
Figure 6: The Main Menu.
Enter/Exit the Menu Mode
Enter the menu by pressing the Menu softkey. The most recently used tab is highlighted. If the
handset has been restarted, the Contacts tab is displayed.
1. Use the Left or Right navigation key to choose a menu tab and then press the Down
navigation key to open it. The menu title appears and the first alternative is highlighted.
2. Use the Up or Down navigation keys to move through the list. Press the Right navigation
key to select an alternative.
To back up in Menu mode:
•
If you entered the menu using the Right navigation key, you can use the Left key to back
up one step.
•
If you entered the menu using the Menu soft key, use the Back softkey to back up.
•
Press the Menu soft key again to exit the Menu and return to standby mode.
Menu Tree
The following diagrams illustrate the menus for each tab.
Note: Some options are system-dependent and may not appear on your phone.
26
5603 Wireless Handset User Guide
Calls
27
5603 Wireless Handset User Guide
Contacts
• Call contact
——>
• Search
• From contact list
• Add contact
——>
• Edit contact
——> • Search
• From contact list
• Delete contact
• New
• From Call list
——> • Search
• From contact list
• Central phonebook* ——> • Search by name
• Search by number
• Last result
>
——> • Name
• Work number
>
• Mobile number
• Other number
>
>
>
>
——> • Name
• Work number
• Mobile number
• Other number
>
>
>
>
>
>
——>
• Call
• More
• Back
>
——>
>
>
• View contact
• Add to contacts >
* System dependent
Note: It is also possible to access the Call contacts menu by pressing the soft key
in idle mode.
28
5603 Wireless Handset User Guide
Settings
• Sound & Alerts —> • Volume
>
• Ring signals
—> • Internal call
• External call
• Callback
• Vibrator alert
—> • On
• On if silent
• Off
• Key sound
—> •Click
• Tone
• Silent
• Headset
—> • Mic on boom
• Mic on cable
• Display
—> • Contrast
• Time & Date
—> • Time format
—>
• hh:mm (am/pm)
• hh:mm
• Date format
—>
• dd month yy
• month dd yyyy
• yyyy-mm-dd
• mm/dd/yyyy
• dd/mm/yyyy
• dd-mm-yyyy
• dd.mm.yyyy
• Locks
>
—> • Automatic key lock
• Phone lock
• Answering
–> • Answering key
—> • On
• Off
—> • On
• On in charger
• Off
• Change PIN code >
—> • Auto phone lock
—> • Hook-off
• Any key
• Answering behaviour —>
• Automatically
• Loudspeaking
• *Language
—> Français, Nederlands,
English, etc.
• In charger
—> • No action
• Switch off
• Redirect
• Sound off
• System
—> • Change system — >
• Subscribe
>
• Unsubscribe
>
• Rename system >
• Priority
>
• Owner ID
>
• Automatically
• System 1
• System 2
|
|
29
5603 Wireless Handset User Guide
In Call
The In Call menu can be reached during an ongoing call by pressing the "More" soft key
Note: If configured in the PDM/WSM, it is possible to call an emergency call while the
telephone/keypad is locked. During the ongoing emergency call, the In Call menu is not
reachable.
30
5603 Wireless Handset User Guide
Call Menu
1. Enter the menu by pressing the “Menu” soft key.
2. Select
in the menu.
3. Press "Select".
Call List
The 25 last received, dialled or missed calls are stored in a call list. If a number occurs more
than once the last time stamp, together with the total number of occurrences, is shown.
Note: If supported by the system, the number’s contact name can be displayed in the
call list.
1. Select "Call list", and step with
and
to scroll in the list.
The "Call list" can also be opened by pressing
in idle mode.
Dial number from Call list
1. Select number to call.
2. Press "Call" to dial.
View the Time of a Call
1. Press "More".
2. Select "Time of call". The time and date is displayed.
Edit Number from Call list
1. Press the "More" soft key.
2. Select "Edit number".
Save Number
1. Press the "More" soft key.
2. Select "Save number".
31
5603 Wireless Handset User Guide
Delete Entry from the Call list
1. Press the "More" soft key.
2. Select entry to delete.
3. Select "Delete".
4. Select "Yes" to delete the entry from the list.
Delete all Entries from the Call list
1. Press the "More" soft key.
2. Select "Delete all".
3. Select "Yes" to delete all the entries from the list.
Missed Calls
1. Select "Missed calls".
2. Step with the
and
to scroll in the list.
3. Press "Call" to call back.
As in "Call list" there is a "More" soft key which can be used to view the time/date of the call,
edit the received number, add to contacts, and delete received numbers. See “Call List” on
page 31 for information about the functionality in the "More" soft key.
Note: If supported by the system, the number’s contact name can be displayed in the list.
Call Time
The total time of the previous call and last call is displayed by selecting "Call time".
32
5603 Wireless Handset User Guide
Contact Menu
1. Enter the menu by pressing the “Menu” soft key.
2. Select
in the menu.
Call Contact
Note: Is it also possible to access Call contact by pressing the soft key
mode.
in idle
1. Select "Call contact".
2. Select contact from the list, or enter name or number in the search field.
3. Press
, or "Call".
It is also possible to edit the contact by selecting "View" > "More". Note that it is not possible
to edit a company phonebook contact. The company contacts are indicated by a “Locked entry”
icon in front of the name.
Add Contact
1. Select "Add contact".
Add New Contact
1. Select "New".
2. Select "Add", and enter the name of the contact, see “Alphanumeric Keys” on page 10.
3. Press "OK".
4. Select "Work number", "Mobile number", or "Other number".
5. Press "Add".
6. Enter the numbers. It is possible to add tone "T" or pause "P" in phone numbers by pressing
the Space key 5 times or 7 times, respectively.
7. Press "OK".
8. Press "Save" and then "Back".
33
5603 Wireless Handset User Guide
Add from Call List
1. Select "From call list".
2. Select number.
3. Press "Add".
4. Select "Work number", "Mobile number", or "Other number".
5. Press "Select".
6. Press "Add", and enter name for the contact, see “Alphanumeric Keys” on page 10.
7. Press "OK".
8. Press "Save".
Edit Contact
Note: It is not possible to edit a company phonebook contact. The company contacts
are indicated by a “Locked entry” icon in front of the name.
1. Select "Edit contact".
2. Select contact, and press "Edit" twice.
3. Enter new name/number, see “Alphanumeric Keys” on page 10. It is possible to add tone
"T" or pause "P" in phone numbers by pressing the Space key 5 times or 7 times,
respectively.
4. Press "OK".
5. Press "Save".
Delete Contact
Note: It is not possible to delete a company phonebook contact. The company contacts
are indicated by a “Locked entry” icon in front of the name.
1. Select "Delete contact".
2. Select contact.
3. Press "Delete".
4. Press "Yes" to confirm.
34
5603 Wireless Handset User Guide
Central Phonebook
In the central phonebook it is possible to search by name or number. The last search result
can be displayed.
When the search result is displayed, it is possible to view contact information, and add the
number to new contact by pressing the "More" soft key. It is also possible to dial the number
by pressing
, or the "Call" soft key.
1. Select "Central phonebook".
Search by Name
1. Select "Search by name".
2. Enter first name and/or last name.
3. Press "Search". The search result will be displayed.
Search by Number
1. Select "Search by number".
2. Enter the number.
3. Press "Search". The search result is displayed.
View Last Search Result
Select "Last result". Only the last result will be displayed.
35
5603 Wireless Handset User Guide
Settings Menu
1. Enter the menu by pressing the “Menu” soft key.
2. Select
in the menu.
Sound and Alert Settings
Adjust the Ringer Volume
1. Select "Sound & Alerts".
2. Select “Volume”.
3. Adjust the volume by using
and
on the navigation key.
4. Press "Back" to save the setting.
Select Ring Signals
1. Select "Ring signals".
2. Select "Internal call", "External Call", or "Callback"1.
3. Press "Select".
4. Select ring signal. It is possible to listen to the selected ring signal by pressing the "Play"
soft key. The ring signal will be repeated until the "Stop" soft key is pressed.
5. Press "Select".
Turn the Vibrator on/off
1. Select “Vibrator alert”.
2. Select “On”, “On if silent” (i.e. the vibrator is on when the handset is muted), or “Off”.
3. Press "Select".
4. Press "Back" to save the setting.
Set the Key Sound
This means that every time a key is used, a low sound is heard.
1. Select “Key sound”.
2. Select “Silent, “Click”, or “Tone”.
3. Press "Back".
It is possible to listen to the key sound by pressing the "Play" soft key.
1. "Callback" is only applicable if defined in the PDM/WSM.
36
5603 Wireless Handset User Guide
Select Headset Profile
1. Select "Headset".
2. Select "Mic on boom", "Mic on cable", or "Customized headset profile"1
3. Press "Select".
Display Settings
1. Select “Display”.
2. Select “Contrast”.
3. Adjust the contrast by using the
and
on the navigation key.
4. Press "OK".
5. Press "Back".
Time & Date Settings
Set Time Format
1. Select "Time & Date"
2. Press "Select".
3. Select time format. The actual time format will be displayed. Selectable time formats:
•
hh:mm (am/pm) (for example: 1:00pm)
•
hh:mm (for example 13:00)
4. Press "Select" to save the setting.
Set Date Format
1. Select “Time & Date”.
2. Press "Select".
3. Select “Date format”
4. Press "Select". Selectable date format:
•
DD/MM/YYYY, for example: 17/09/2008 (also called Europe)
•
MM/DD/YYYY, for example: 9/17/2008 (also called US)
•
YYYY-MM-DD, for example: 2008-09-17 (ISO 8601)
•
MMM DD YYYY, for example: Sep 17 2008
•
DD MMM YY, for example: 17 Sep 08
•
DD.MM.YYYY, for example: 17.09.2008
•
DD-MM-YYYY, for example: 17-09-2008
5. Press "Select" to save the setting.
1. "Customized headset profile" is only visible if the headset profile has been configured in the PDM/WSM.
37
5603 Wireless Handset User Guide
Phone Lock settings
Activate the Automatic Key lock
1. Select “Locks”.
2. Select "Automatic key lock".
3. Select "On" for activation of automatic key lock.
Note: It is possible to answer/close an incoming call while the keypad is locked. If
configured in the PDM/WSM, it is also possible to call an emergency call while the keypad
is locked. See the Mitel 5603 Wireless Handset Configuration Manual.
Activate the Phone Lock
The handset can be protected for unauthorized use. If this function is activated, a PIN code
has to be entered at power on, or when the handset is placed in a charger - this behaviour will
first be activated when the handset is placed in the charger. The default phone lock code (0000)
can be changed to any 4-8 digit personalized code.
Note: If configured in the PDM/WSM, it is possible to call an emergency call while the
handset is locked. See the Mitel 5603 Wireless Handset Configuration Manual.
1. Select “Locks”.
2. Select “Auto phone lock”.
3. Select “On”, or "On in charger".
4. Enter PIN code
5. Press "OK".
If the PIN code is forgotten it can be removed by your distributor.
Deactivate the Phone Lock
1. Select “Locks”.
2. Select “Auto phone lock”.
3. Select “Off”.
4. Enter PIN code
5. Press "OK".
Change PIN Code
1. Select "Change PIN code".
2. Enter the old PIN code.
3. Press "OK".
4. Enter new PIN code twice.
5. Press "Save".
38
5603 Wireless Handset User Guide
Answering
The default setting for the handset is to use the Off-hook key when answering a call. The
answering behaviour can be configured to answer the call automatically, i.e. without pressing
a key, and/or in loudspeaking mode. It is also possible to set the answering behaviour to any
key. If "Any key" is selected, any keys except the "On-hook" key and the "Sound off" key can
be used to answer a call.
Answering Key
The answering key is by default set to Hook-off.
1. Select "Answering".
2. Select "Answering key".
3. Select "Hook-off" or "Any key".
4. Press "Back" to save the setting.
Answering Behaviour
1. Select "Answering".
2. Select "Answer behaviour".
3. Select "Automatically" and/or "Loudspeaking".
4. Press "Change" to change the setting. The check box will be marked.
5. Press "Back" to save the setting. To remove the setting, press "Change". The check box
will be unmarked.
Change the Menu Language
1. Select “Language”. English, Español (Spanish), Français (French), Nederlands (Dutch),
Deutsch (German), Russki (Russian).
2. Press "Back".
Note: It is possible to download one additional language via the PDM/WSM, see
“Software Upgrade and Additional Features” on page 44. 7 languages are available for
download; Czech, Greek, Hungarian, Polish, Russian, Slovakian, and Turkish.
Change Owner ID
The Owner ID is set to identify the handset.
1. Select "Owner ID".
2. Enter identity.
3. Press "Save".
39
5603 Wireless Handset User Guide
In Charger
Redirect Calls while Charging
Calls can be redirected to another extension when the handset is placed in a charger.The
function is automatically cancelled when the handset is removed from the charger.
1. Select “In charger”.
2. Select “Redirect”.
Note: The settings in the system determines how the incoming calls will be handled.
This is a system dependent feature.
Switch off While Charging
When the handset is placed in the charger it can be switched off. When removed from the
charger it will switch on again.
1. Select “In charger”.
2. Select “Switch off”.
Mute Handset While Charging
When the handset is placed in the charger it can be muted while it is charging. When it is
removed from the charger it will switch on the sound again.
1. Select “In charger”.
2. Select “Sound off”.
Deactivate the Charging Mode
1. Select “In charger”.
2. Select “No action”.
40
5603 Wireless Handset User Guide
System
Change System
Select “Automatic” or a specific system. If the handset is set to “Automatic” it selects a system
according to the priority list, see “Priority” on page 42.
Subscribe System
The handset can subscribe up to eight different systems. To subscribe a new system, the “Park:”
(Portable Access Right Key) and “Ac:” (Authentication code) related to the system that will be
log on to are needed. Contact your system administrator for more information.
Note: The PARK code may not be needed if there is no alien DECT system within the
coverage area.
The IPEI code is a unique code which has been assigned to the handset, see also “Admin
Menu” on page 43.
1. Enter System name. Press "next".
2. Enter PARK code. The PARK code may not be needed if there is no alien DECT system
within the coverage area.
3. Enter AC code. Press "Next".
An information text "Protection on?" is displayed.
4. Select "Yes" if the new system needs to be protected. It is not possible to delete a protected
subscription from the System menu1.
5. Press "OK". A searching mode starts.
Unsubscribe System
1. Select "Unsubscribe"1.
2. Select the system to unsubscribe in the list.
3. Press "Select".
4. Press "Yes" to unsubscribe the system. Otherwise, press "No".
Rename System
It is possible to change the name of the system in the handset.
1. Select "Rename System".
2. Select system to rename.
3. Press "Edit"
4. Enter new name.
5. Select "Save".
1. It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via the Admin
menu or the DECT system.
41
5603 Wireless Handset User Guide
Priority
The default order of priority is the order of entered subscriptions. This means that the first
subscribed system has the highest priority. This list can be edited by the user. It is possible to
set the systems in priority by moving them up or down in the list.
Note: This is used in combination with system set to be "Automatic", see “Change
System” on page 41.
1. Select "Priority".
2. Change the priority if needed by selecting "Up" or "Down". The priority will be saved when
"Back" is selected.
42
5603 Wireless Handset User Guide
Advanced Functions
Admin Menu
The handset has a hidden menu for system administrators. See the Mitel 5603 Wireless
Handset Configuration Manual.
The Admin menu contains:
•
Software and hardware information, licence information, IPEI/IPDI, and User ID
•
DECT link and system information
•
Fault logging
•
Centralized Management status
•
Enhanced system menu with ability to alter protection
•
Factory reset option
For quick access to the Device Information (DI) menu in idle mode, press the keys containing
*#DI# (that is *#34# ). To view the IPEI/IPDI directly, press *#06#. See the table below
Information
Code
Software version
*#34#
Hardware version
*#34#
IPEI/IPDI
*#34# or *#06#
User ID
*#34#
Clear Lists in Charger
Via PDM/WSM it is possible to set a parameter that will clear messaging lists and call lists that
have been stored in the handset. When the parameter is activated and the function has been
downloaded to the handset, the lists will be deleted when placed in a charger. This can be
useful during administration of handsets for new users. See also the Mitel 5603 Wireless
Handset Configuration Manual.
43
5603 Wireless Handset User Guide
System Handling
Software Upgrade and Additional Features
Software and parameters in the 5603 handset can be upgraded by using the PDM or the WSM.
See the Portable Device Manager (PDM) Installation and Operation Manual or the WSM
Installation and Operation Manual.
Examples of additional features that can be downloaded/configured via PDM/WSM:
•
Company phonebook
•
Downloadable languages
•
Licenses1
Refer to the Mitel 5603 Wireless Handset Configuration Manual for more information.
To view the handset’s software version, enter *#34# in standby mode.
1. The licence(s) can also be added via the Admin menu in the handset.
44
5603 Wireless Handset User Guide
Troubleshooting
This section contains information on how to solve common operational problems, and warnings
you may receive.
Go through the following lists if you encounter any problems. If this checklist does not solve
the problem, contact your system administrator.
If others have similar problems, there may be a system error.
Operational Problems
Fault
Probable cause
Action or comment
No display
The battery level is low or the handset
is defective.
Charge the battery or contact
system administrator.
No ringing
The sound off icon is on, or ringer
volume set to silent, or the handset is
defective.
Long press the Sound off key, or
increase volume, or contact
system administrator.
Error or Warning Messages
Display shows
Probable cause
Action or comment
No access
The network is in range, but no
access rights.
Switch handset off and then switch
it on again or contact system
administrator.
No System. The handset
beeps once a minute
(during max 30 minutes)
with a low tone followed
by a high tone (if enabled,
the vibrator also follows
the beeps).
The handset is out of coverage or
handset is defective.
Stop the beep with the Sound off
key and go into range.
Note: When re-entering the
coverage area it can take a couple
of minutes before the handset
automatically has registered into
the system.
or
contact system administrator.
SERVICE NEEDED
The handset is defective.
Select reset option on the middle
soft key if available or if no reset
option is available or fault does not
resolve the handset needs repair.
Note: Display message only
shown in English.
Easy replacement procedure not
followed correctly or failure during
easy replacement procedure.
Send the handset for service.
Parameters corrupt
SERVICE NEEDED
Invalid IPDI
Note: This display
message is only shown in
English.
Page 1 of 2
45
5603 Wireless Handset User Guide
Display shows
Probable cause
Action or comment
Enter PIN code
The handset’s lock is activated.
Enter the required PIN code. If PIN
code lost enter new via PDM or do
a factory reset via PDM.
Battery low, charge now
The battery level is low.
Charge or replace the battery.
Phonebook is not
available at the moment.
The phonebook does not respond, not
available at the moment.
Try again later or if fault persists do
a factory reset via admin menu or
PDM.
Voice mail number not
defined
There is no Voice mail number
defined in the handset.
Define a Voice mail number via
PDM.
Could not encrypt
connection
The parameter "Encryption Required"
is enabled in the handset in
combination with;
1. Disable the "Encryption
Required" parameter in
handset; and/or,
1. Unencrypted base station(s);
and/or,
2. Enable the encryption in the
base station(s); and/or,
2. Unsupported base station(s).
Note: If base station(s) is used,
the software version must be 3.1.x
or later.
3. Use supported base station(s).
Ask your supplier.
Page 2 of 2
LED Error Indications
See also chapter “LED Indications during Easy Replacement” on page 52.
LED is flashing red, quick flash, (100 ms on, 800 ms off)
1. If a third handset, that is another handset than the "old" (the replaced handset) and "new"
(the replacement headset) handset, is inserted into the charger during Easy Replacement,
this error indication appears. Change to the correct handset.
2. The charger has found that Easy Replacement does not work. Change back to the "new"
handset.
LED is flashing red, long flash (800 ms on, 100 ms off)
Error during Easy Replacement. Both telephones need to be sent for service.
46
5603 Wireless Handset User Guide
Operation Notice
Accessibility and Voice Quality
The base network is not always available. If you do not get in contact with your system, contact
your system administrator. For best voice quality, avoid positioning near computer, radio or
similar equipment.
Operating Area
You can only use your handset in the area that is covered by your system. Outside this area
you will loose contact with the system. The signal strength icon will be low and “Searching” will
be displayed.
Out of Range
When you leave the system's coverage area a short beep will sound and the text “Searching”
will appear in the display.
The out of range beep will be repeated every minute for 30 minutes. It is possible to turn
the sound off by long pressing
.
When re-entering the coverage area it can take a couple of minutes before the handset
automatically has registered into the system.
47
5603 Wireless Handset User Guide
Maintenance
Maintenance of Batteries
Battery Warnings
The "Low battery" icon is displayed when the battery has 10% or less
remaining capacity left. In addition; a warning signal sounds every minute, the
LED flashing orange, and the dialog window "Battery low. Charge now."
appears.
The "Empty battery" icon is flashing when the battery has 5% or less remaining
capacity left. In addition; a warning signal sounds every second, the LED
flashing red, and the dialog window "Battery empty. Shutting down." appears.
During a call, only the corresponding battery warning signal will notify the user. The warning
signal cannot be silenced during a call. When not in call, the warning signal can be silenced
by pressing
.
Charge the Battery
Place the handset in the desktop charger or in the rack charger. The battery is being charged
when the LED on the handset is steady orange. When the battery is fully charged the LED will
be green.
An animated battery icon
is also shown in the display indicating charging by starting with
its current charge and ending with the full charge. A filled battery icon
indicates a fully
charged battery.
Note: Only use the prescribed chargers for charging.
Replace the Battery
If the standby time for the handset becomes too low, the battery should be replaced by a new
one. Please contact your system administrator or your supplier, for information about new
batteries. Attach the battery as described in the illustration below. The battery is easy to replace.
It is attached inside the battery lid and is connected to the handset in such a way that no
miss-contact is possible.
1, 4
2
3
Figure 7: Easy Replaceable Battery.
48
5603 Wireless Handset User Guide
Attach the Hinge-type Clip
Attach the hinge-type belt clip as described in the illustration below.
Figure 8: Attach the hinge-type clip into position.
Attach the Swivel-type Clip
Attach the swivel-type belt clip as described in the illustration below.
Figure 1.
Figure 9: Attach the swivel-type clip into position.
Easy Replacement
Easy replacement can be used if a handset needs to be replaced due to, for example, a broken
display.
Note: If the electrical connection is damaged, it is not possible to follow the Easy
Replacement procedure. Depending on fault, it might work to do a replacement via
PDM/WSM. See the Mitel 5603 Wireless Handset Configuration Manual.
49
5603 Wireless Handset User Guide
The easy replacement procedure is done via the handset display and the 5603/4 Programmer
or the 5603/4 Rack Charger.
The following settings are replaced during easy replacement:
•
DECT registration
•
User parameters (including User ID)
•
Contacts
•
The extension number is assigned to the new handset.
The following settings are not replaced during the easy replacement:
•
Call list
Before Starting Easy Replacement Procedure
1. Check that both the old handset (that is, the handset to be replaced) and the new handset
(that is, the replacement handset) are of the same device type (5603).
Note: It is possible to perform Easy Replacement between different product licenses
(that is; Basic and Advanced). The new handset’s product license is not replaced by the
old handset’s variant license during the procedure1.
2. Make sure that the handset batteries are charged before starting the easy replacement
procedure.
3. Switch off the new handset by long pressing
.
Easy Replacement Procedure
During the Easy Replacement procedure, the LEDs of the handset and the charger follow the
same LED indications. This means that if the old handset has a broken display, the LED
indications on the charger and on the handset can be used to follow the replacement procedure.
Before and after easy replacement, the LEDs may have different LED indications. For more
details, see also“LED Indications during Easy Replacement” on page 52.
IMPORTANT:Never remove a handset from the charger until the instructions in the
display or the LED tells you to do so (see status on the LED if the display is broken). If
there is an error indication, it may be allowed to remove the handset, see
“Troubleshooting” on page 45 for further instructions.
After the old handset has been in the charger, the new handset needs to be placed in
the charger regardless if the replacement was successful or not. Failing to do so may
result in malfunction and the new handset will need to be sent for service.
50
5603 Wireless Handset User Guide
New
New
Old
New
1
2
3
4, 8
7
5
6
Figure 10: Easy Replacement Procedure via the 5603/4 Programmer
I
1
On the new handset, press and hold
Note: Do not release
until you are instructed to do so.
2
Put the new handset in the charger.
3
When the text "Start phone replacement?" is displayed, release
.
Press "Yes" (left soft key).
The text "Follow the instructions. Each step can take several minutes." appears in the display.
Press "OK"(left soft key).
4, 5
When the text "Please insert old phone in charger" is displayed, replace the new handset with
the old handset. The handset can either be switched on or off.
Note: If the 5603/4 Rack Charger is used, the same charging slot has to be used for both
handsets.
The handset will be restarted and after a few seconds, the text "Saving settings. Do not remove
phone from charger" appears. The charger LED changes to slow orange flashing.
IMPORTANT: Do not remove the handset while the text "Saving settings. Do not remove phone
from charger" is displayed. It may take several minutes
6, 7
When the text "Please insert new phone in charger" is displayed, replace the old handset with
the new handset. The text "Restoring settings" is displayed.
IMPORTANT: Do not remove the handset while the text "Restoring settings" is displayed.
8
When the text "Phone successfully replaced. Please remove phone to restart." appears in the
display, remove the handset from the charger. The handset is automatically restarted.
51
5603 Wireless Handset User Guide
LED Indications during Easy Replacement
The following table shows the LED indications that are used for the 5603 and the charger during
the easy replacement procedure.. See also “Troubleshooting” on page 45.
LED indication
Description
Orange, flashing (1 000 ms on, 1 000 ms off) File transfer during Easy Replacement.
52
Orange, flashing (100 ms on, 800 ms off)
“Change phone” indication during Easy Replacement.
Red, flashing (100 ms on, 800 ms off)
Error indication during Easy Replacement. Put back old
portable in charger.
Red, flashing (900 ms on, 100 ms off)
Error during Easy Replacement. Service needed for
both portables.