Quick Reference Guide

Quick Reference Guide
Wireless Video Intercom System
Model No.
VL-SWD701KL/VL-SWD701KS
Model No.
VL-V571L
VL-V554L
Video Intercom System
VL-SVD701KL/VL-SVD701KS
VL-MWD701KL
VL-WD614
Table of Contents
Main Monitor Station/Door Station (Doorphone)
Parts Descriptions........................................................................................2
Basic Operations..........................................................................................3
Sub Monitor Station
Parts Descriptions........................................................................................4
Basic Operations..........................................................................................4
Thank you for purchasing a Panasonic product.
 This guide explains some basic features and operations, but not all of them. For further
details, see the Japanese operating instructions.
 This product is designed for use in Japan.
Panasonic cannot provide service for this product if used outside Japan.
Any details given in this guide are subject to change without notice.

Main Monitor Station/Door Station (Doorphone)
Parts Descriptions
1 Display (Touch Panel)
Main Monitor Station
To use the touch panel
Touch the desired item as shown below.
1
2
3
4
● A touch sound is heard and the touched
item is highlighted.
10
9
5
6
7
8
2
Notification indicator
●Flashes when there is a
notification.
3
Living mode (Home, Night,
Out) indicator
4
SD card indicator
5 Speaker
6 Talk indicator
7 Talk button
8 OFF button
9 Microphone
10 Guidance off button
●Hides the button guidance that
overlaps the image.
Door Station (Doorphone)
■ VL-V571L
1
2
2 Camera lens
1
4
3 Call button & indicator
4
2
5
5
6
6
3
1 Lens cover
■ VL-V554L
3
2
4 Microphone
5 LED lights
6 Speaker
Basic Operations
●The number after the button shows the location of the button described in the previous page.
■ To answer a call from a doorphone
When the ringtone is heard and the display turns on, press
( 7 ).
■ To monitor outside images
Touch the display (touch panel) ( 1 ). â Touch[モニター 様子を見る].
(To talk to the visitor, press
.)
● When an optional camera or more than one optional doorphone is connected
After touching[モニター 様子を見る], touch the desired doorphone number, then touch
the doorphone image.
■ To monitor camera images
Touch the display (touch panel). â Touch[モニター 様子を見る] .
â Touch the camera image.
● When more than one camera is connected
After touching[モニター 様子を見る], touch the desired camera image.
■ To record a displayed image manually
Touch[録画]while monitoring an outside image.
■ To play back recorded images when the notification indicator flashes and
is displayed
Touch the display (touch panel). â Touch[録画の一覧]. â Touch[再生].
â The recorded images are automatically played back.
■ To call the sub monitor station
Touch the display (touch panel). â Touch[子機と話す]
, and speak to the other party.
â After the other party answers, start talking.
● When more than one optional sub monitor station is registered
After touching[子機と話す], touch the image of where the desired sub monitor station is
located, and speak to the other party.
3
Sub Monitor Station
Parts Descriptions
1 Earpiece
Sub Monitor Station
2 Display
1
3 Multifunction buttons
7
Navigator button
8
2
Set button
9
6 displays functions that can be
ヒ
ヒパバヒピ ヒパ⿉パパɷȬɑ⒙ᰳ˛
ቈ᯺◜
6
10
operated by
11
5
12
,
.
4 Monitor button & indicator
3
4
,
5 Talk button & indicator (Telephone)
6 Tone button (To switch to DTMF tone)
7 Charge lamp
13
8 Antenna (built-in)
6
9 Speaker
14
10 Battery cover
15
11 Intercom/Hold button
12 OFF button
13 Talk button & indicator (Doorphone)
14 Microphone
15 Flip
Basic Operations
●The number after the button shows the location of the button described above.
Doorphone function
■ To answer a door call
■ To monitor outside images
When the ringtone is heard and the display
turns on, press
Press
( 4 ).
(To talk to the visitor, press
( 13 ).
.)
● When an optional camera or more than
one optional doorphone is connected
After press
using
4
, select the desired doorphone
( 3 ) and press
( 3 ).
Doorphone function
Telephone function
■ To monitor camera images
After press
using
■ To make a call
Lift the sub monitor station from the charger
, select the desired camera
and press
and press
.
and dial.......To end the call, press
■ To record a displayed image manually
Press
outside image. â Select [録画] using
,
.
( 録画一覧 ) ( 3 ). â Press
select the date and then press
â Press
■ To place the current call on hold
Press
Press
Press
.
during a call. â After pressing
( 内線呼出 ) ( 3 ), select [親機] using
and press
.※â Select the desired sub
, and press
.
,
. â After the other party
answers, press
.
■ To transfer the held call to another
sub monitor station
â Speak to the other party. â After the
other party answers, start talking.
Press
※When the sub monitor station is registered
to both the main monitor station and base
unit (Telephone/Fax)
during a call. â After pressing
( 内線呼出 ), select the desired sub
monitor station using
, select[ドアホン室内呼]
, and press
.
■ To transfer the held call to the base unit
■ To call another sub monitor station
monitor station using
during a call.
■ To retrieve the held call
, select[親機]using
and press
for approx. 2 seconds again.
Press
( 11 ).※ â Speak to the other party.
After pressing
for approx. 2
● To switch to the earpiece
.
● When more than one optional sub
monitor station is registered
using
.
seconds. â Talk to the microphone.
to
.
After pressing
â Talk.......To end the call, press
During a call, press
â After the other party answers, start talking.
Press
.
(Hands-free talk)
■ To call the main monitor station
Press
When the phone rings... â Press
■ To switch to the speakerphone
■ To play back recorded images when
新着の未確認画像あり is displayed
Press
( 12 ).
■ To receive a call
( メニュー ) while monitoring an
and press
( 5 ). â Open the flip ( 15 )
, and press
â After the other party answers, press
.
5
.
.
© Panasonic System Networks Co., Ltd. 2014
PNQP1105ZA C0414MT0