SMD LED LAMP BL-LS3020A0S1 Features: 3.0mmx2.0mm SMD, 1.3mm THICKNESS PLCC2 package Mono-color type, Ultra brightness Compatible with automatic placement equipment WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE: 3KPCS/REEL RoHs Compliance Electrical-optical characteristics: (Ta=25°C) (Test Condition: IF=20mA) Chip Part Number Emitted Color Material P (n m) Lens Type Forward Voltage(VF) Unit:V Luminous Intensity (Iv) Unit:mcd Typ Max Min. Typ. BL-LS3020A0S1UEC Ultra Red AlGaAs 630 2.10 2.50 250 320 BL-LS3020A0S1UYO Ultra Amber AlGaInP 610 2.10 2.60 500 600 BL-LS3020A0S1UYC Ultra Yellow AlGaInP 593 2.10 2.60 500 600 BL-LS3020A0S1UGC Ultra Green AlGaInP 575 2.20 2.70 70 80 BL-LS3020A0S1PGC Ultra Pure Green InGaN 525 3.10 3.80 1300 1500 BL-LS3020A0S1UBC Ultra Blue InGaN 470 3.10 3.80 450 500 BL-LS3020A0S1UWC Ultra White InGaN / 3.10 3.80 1900 2100 Water Clear Viewi ng Angle 2θ1/2 (deg) 120 Absolute maximum ratings (Ta=25°C) Parameter Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG Lead Soldering Temperature TSOL Unit UE UYO UY UG PG UB UW 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 mW 100 100 100 100 100 100 100 mA mA V -30 to +80 -40 to +85 °C Max.260±5°C for 3 sec Max. (1.6mm from the base of the epoxy bulb) °C °C APPRO VED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.4 Page 1 of 8 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] SMD LED LAMP BL-LS3020A0S1 Package configuration & Internal circuit diagram PACKAGE MARKING ANODE① ② CATHODE Notes: 1. All dimensions are in millimeters (inches) 2. Tolerance is ±0.25(0.01")unless otherwise noted. 3. Specifications are subject to change without notice. APPRO VED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.4 Page 2 of 8 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] SMD LED LAMP BL-LS3020A0S1 Tape Specifications Smt Reflow Solding Instructions Number of reflow process shall be less than 2 times and cooling process to normai temperature is required between first and second soldering process Recommended Soldering Pattern (Units:mm) 1.50 1.40 1.40 1 . 50 1.40 Tape Specifications (Units:mm) 1.55 4.00 2.00 1.75 1.65 3.5 8 3.2 4.00 APPRO VED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.4 Page 3 of 8 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] SMD LED LAMP BL-LS3020A0S1 SELECTION CODE FOR SUPER BRIGHT LEDS brightness(MCD brightness(MCD Grou Grou ) ) p p min max min max F 120 170 P 1300 G 170 230 Q 1700 H 230 300 R 2200 J 300 400 S 3000 K 400 550 L 550 750 100 M 750 0 130 N 1000 0 forward voltage Ranks Voltage (V) Grou Group p min max A 1.7 1.9 K Voltage (V) min max 3.6 1700 2200 3000 4000 3.8 B 1.9 2.1 L 3.8 4 C 2.1 2.3 M 4 4.2 D 2.3 2.5 N 4.2 4.4 E 2.5 2.8 P 4.4 4.6 F 2.8 3 Q 4.6 4.8 G 3 3.2 R 4.8 5 H 3.2 3.4 S 5 5.2 J 3.4 3.6 T 5.2 5.4 APPRO VED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.4 Page 4 of 8 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] SMD LED LAMP BL-LS3020A0S1 Color Temperature Bin 0.46 3000 K 0.44 3500 K 0.42 4000 K 7 0.40 9 4500 K 11 13 5000 K 0.38 y 6000 K 6500 K 7000 K 0.34 27 0.32 28 20 23 25 18 21 W3 16 19 0.36 12 14 17 5500 K 8 1 2 4 6 10 15 3 5 W1 W2 N1 22 N2 24 26 C1 0.30 0.28 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 x CODE W1 W2 W3 x y 0.4373 0.4562 0.4813 0.4593 0.3893 0.4260 0.4319 0.3944 X 0.4147 0.4299 0.4562 0.4373 Y 0.3814 0.4165 0.4260 0.3893 X 0.3889 0.3996 0.4299 0.4147 Y 0.3690 0.4015 0.4165 0.3814 CODE N1 N2 C1 X 0.3670 0.3736 0.4006 0.3898 Y 0.3578 0.3874 0.4044 0.3716 X 0.3481 0.3376 0.3592 0.3670 Y 0.3557 0.3616 0.3641 0.3578 X 0.3160 0.3028 0.3265 0.3364 Y 0.3274 0.3304 0.3371 0.3328 APPRO VED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.4 Page 5 of 8 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] SMD LED LAMP BL-LS3020A0S1 CODE 1 2 3 4 5 6 7 x y 0.4582 0.4687 0.4813 0.4700 0.4483 0.4582 0.4700 0.4593 0.4465 0.4562 0.4687 0.4582 0.4373 0.4465 0.4582 0.4483 0.4342 0.4430 0.4562 0.4465 0.4259 0.4342 0.4465 0.4373 0.4221 0.4299 0.4430 0.4342 0.4099 0.4289 0.4319 0.4126 0.3919 0.4099 0.4126 0.3944 0.4071 0.4260 0.4289 0.4099 0.3893 0.4071 0.4099 0.3919 0.4028 0.4212 0.4260 0.4071 0.3853 0.4028 0.4071 0.3893 0.3984 0.4165 0.4212 0.4028 CODE 8 9 10 11 12 13 14 x y 0.4147 0.4221 0.4342 0.4259 0.4080 0.4146 0.4299 0.4221 0.4017 0.4080 0.4221 0.4147 0.3941 0.3996 0.4146 0.4080 0.3889 0.3941 0.4080 0.4017 0.3825 0.3869 0.4006 0.3950 0.3783 0.3825 0.3950 0.3898 0.3814 0.3984 0.4028 0.3853 0.3916 0.4089 0.4165 0.3984 0.3751 0.3916 0.3984 0.3814 0.3848 0.4015 0.4089 0.3916 0.3690 0.3848 0.3916 0.3751 0.3798 0.3958 0.4044 0.3875 0.3646 0.3798 0.3875 0.3716 CODE 15 16 17 18 19 20 21 x y 0.3702 0.3736 0.3869 0.3825 0.3670 0.3702 0.3825 0.3783 0.3736 0.3616 0.3592 0.3703 0.3703 0.3592 0.3568 0.3670 0.3616 0.3496 0.3481 0.3592 0.3592 0.3481 0.3466 0.3568 0.3496 0.3376 0.3370 0.3481 0.3722 0.3874 0.3958 0.3798 0.3578 0.3722 0.3798 0.3646 0.3874 0.3788 0.3641 0.3726 0.3726 0.3641 0.3495 0.3578 0.3788 0.3702 0.3557 0.3641 0.3641 0.3557 0.3411 0.3495 0.3702 0.3616 0.3472 0.3557 CODE 22 23 24 25 26 27 28 x y 0.3481 0.3370 0.3364 0.3466 0.3376 0.3260 0.3265 0.3370 0.3370 0.3265 0.3270 0.3364 0.3260 0.3144 0.3160 0.3265 0.3265 0.3160 0.3175 0.3270 0.3144 0.3028 0.3055 0.3160 0.3160 0.3055 0.3081 0.3175 0.3557 0.3472 0.3328 0.3411 0.3616 0.3512 0.3371 0.3472 0.3472 0.3371 0.3230 0.3328 0.3512 0.3408 0.3274 0.3371 0.3371 0.3274 0.3139 0.3230 0.3408 0.3304 0.3177 0.3274 0.3274 0.3177 0.3049 0.3139 APPRO VED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.4 Page 6 of 8 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] SMD LED LAMP BL-LS3020A0S1 Typical electrical-optical characteristics curves: (A) 1.0 (B) (C) (D) (2) (3) (8) (4) (1) (6) (5) (9) (10) 0.5 0 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 Wavelength(nm) RELATIVE INTENSITY Vs WAVELENGTH(λ p ) (9) - GaAlAs 880nm (10) - GaAs/GaAs & GaAlAs/GaAs 940nm (A) - GaN/SiC 430nm/Blue (B) - InGaN/SiC 470nm/Blue (C) - InGaN/SiC 505nm/Ultra Green (D) - InGaAl/SiC 525nm/Ultra Green (1) - GaAsP/GaAs 655nm/Red (2) - GaP 570nm/Yellow Green (3) - GaAsP/GaP 585nm/Yellow (4) - GaAsp/GaP 635nm/Orange & Hi-Eff Red (5) - GaP 700nm/Bright Red (6) - GaAlAs/GaAs 660nm/Super Red (8) - GaAsP/GaP 610nm/Super Red 8 64 5 2 3 40 30 20 10 0 1.2 1.6 2.0 2.4 2.6 3.0 4.0 3.0 B 1.0 0 60 80 20 6 2,4,8,A 3 5 10 20 -10 0 10 20 30 40 50 60 4 3 80 100 4 3 2 70 1 AMBIENT TEMPERATURE Ta(℃) 60 3KHz 300Hz 30KHz 100KHz 10KHz 1KHz 100Hz 10 9 8 7 6 5 2 -20 40 AMBIENT TEMPERATURE Ta(℃) FORWARD CURRENT VS. AMBIENT TEMPERATURE Ipeak MAX. IDC MAX. 0.2 30 1 300KHz 3KHz 10KHz 1KHz 100KHz F-REFRESH RATE 10 9 8 7 6 5 0.5 40 0 100 FORWARD CURRENT (mA) RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT 1 5 4 2 3 0.1 -30 40 20 Ipeak MAX. IDC MAX. RELATIVE LUMINOUS INTENSITY 1 5 2.0 FORWARD VOLTAGE (Vf) FORWARD CURRENT VS. FORWARD VOLTAGE 3 2 50 1 FORWARD CURRENT(mA) FORWARD CURRENT(mA) RELATIVE LUMINOUS INTENSITY 1 50 1 10 100 1000 10,000 tp-PULSE DURATION uS (1,2,3,4,6,8,B.D.J.K) 1 1 10 100 1000 tp-PULSE DURATION uS (5) 10,000 NOTE:25℃ free air temperature unless otherwise specified APPRO VED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.4 Page 7 of 8 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] SMD LED LAMP BL-LS3020A0S1 Packing and weighting 3000pcs/Reel 1 Reel/Bag Maximum 10 Bags/Inner Box 3 Inner Box/Box 9 Inner Box/Box APPRO VED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.4 Page 8 of 8 WWW.BETLUX.COM EMAIL: [email protected] , [email protected]