® Electrocomponents Series 204 Data Sheet SMD DIP Switch Surface Mount Multi-Functional DIP Switch IR Solderable, PCB Washable Features Optimized Mechanical Features • Coplanarity: 0.1mm / .004” max. • Compatible with SMT assembly including IR and Vapor-Phase (up to 260°C) • Enclosed actuators shield contacts from foreign particles throughout life of switch • Gull-wing terminal configurations • Available with SPST,SPDT,DPST,DPDT,3PST,4PST circuitry choices • Removable tape seal to withstand IR solder temperature and board washing Optimized Contact System • Contact wiping action on make and break • Integral terminal and contact locked into thermoset base • Available with low profile, standard, or extended actuators • Electrostatic discharge shield rated to 22 KV Materials • Gold plated contacts for long-term contact corrosion resistance • All UL 94 V-0 plastics used • RoHS compliant Electrical and Mechanical Specifications Switch Function SPST - 2 through 10 and 12 positions SPDT & DPST - 1 through 6 positions DPDT & 4PST - 1 through 3 positions 3PST - 1 through 4 positions Contact Resistance 50 milliohms maximum initial 100 milliohms maximum at end of life Insulation Resistance 1,000 megohms minimum between insulated terminals Dielectric Strength 500 VAC for 1 minute between adjacent switches Nonswitching Rating 100 mA or 50 VDC maximum Switch Capacitance 5 pF maximum between adjacent closed switches Operating Temperature –55°C to +85°C Actuation Life 5,000 cycles switching 50 mA @ 24 VDC 1-4 CTS Electrocomponents Coplanarity 0.1mm/.004" max. Allowable Solder Time Up to 60 seconds at 260°C Vibration Per MIL-STD-202F, method 204D, condition B (.06" or 15 G’s between 10 Hz to 2K Hz) with no contact inconsistencies greater than 1 microsecond Shock Per MIL-STD-202F, method 213B, condition A (50 G’s) with no contact inconsistencies greater than 1 microsecond Sealing Bottom epoxy seal optional Top tape seal optional Marking Special side or top marking available - consult CTS Packaging Standard : Anti-static tube packaging Optional : Tape and reel packaging ©2013 CTS Corporation. All rights reserved. Information subject to change. 2/05/13 www.ctscorp.com SPST SCHEMATIC ±0.25 "A" ±.010 O 1 N 2 3 4 Ordering Information SPST Switches 2.03 .080 5 11 No. of "A" Overall Switch Dimension Positions Part No . . 12 4.06 .160 9.78±0.25 .385±.010 1.27 .050 2.03 SLIDE TRAVEL .080 0.89 .035 CTS 7.26 / 9.80 / 12.34 / 14.88 / 17.42 / 19.96 / 22.50 / 25.04 / DATE CODE 9.12±0.35 .359±.014 PART NO. 0.38 .015 0.25±0.08 .010±.003 1.27±0.13 .050±.005 7.60 .299 .986 27.58 / 1.086 32.66 / 1.286 +0.38 7.62 -0.13 .300 +.015 +0 10.40 -0.30 .410 +0 .286 .386 .486 .586 .686 .786 .886 -.005 2 3 4 5 6 7 8 9 10 12 204-2 204-3 204-4 204-5 204-6 204-7 204-8 204-9 204-10 204-12 -.012 2.54 .100 TYP. 0.48±0.08 .019±.003 DIMENSION: TYP. mm inch SPDT / DPST ±0.25 "A" ±.010 1 2 3 SPDT/DPST Switches 2.03 .080 Number of "A" Overall Dimension Switch Positions Actuation 7.26 / .286 12.34 / .486 17.42 / .686 22.50 / .886 27.58 / 1.086 32.66 / 1.286 6 4.06 .160 SPDT 9.78±0.25 .385±.010 CTS SCHEMATIC PART NO. DATE CODE “ON” WHEN ACTUATOR IS TOWARD THE DOT ±0.25 "A" ±.010 DPST SCHEMATIC O N 1 2 3 4.06 .160 1 2 3 4 5 6 SPDT/DPST SPDT/DPST SPDT/DPST SPDT/DPST SPDT/DPST SPDT/DPST 4.06 TYP. .160 2.03 .080 6 Ordering Information 9.78±0.25 .385±.010 2.03 SLIDE .080 TRAVEL 0.89 .035 1.27±0.13 .050±.005 7.60 .299 Part No. . 204-121/204-211 204-122/204-212 204-123/204-213 204-124/204-214 204-125/204-215 204-126/204-216 9.12±0.35 .359±.014 0.38 .015 CTS PART NO. DATE CODE 2.54 TYP. .100 0.48±0.08 TYP. .019±.003 +0 10.40-0.30 .410 +.0 -.012 mm DIMENSION: inch 2-4 CTS Electrocomponents ©2013 CTS Corporation. All rights reserved. Information subject to change. 0.25±0.08 .010±.003 +0.38 7.62 -0.13 .300 +.015 -.005 2/05/13 www.ctscorp.com "A" O N 3PST ±0.25 ±.010 Ordering Information SCHEMATIC 3PST Switches "A" No. of Overall Switch Dimension Positions Actuation Part No. 9.80 / .386 1 3PST 204-311 17.42 / .686 2 3PST 204-312 25.04 / .986 3 3PST 204-313 32.66 /1.286 4 3PST 204-314 4 1 4.06 .160 9.78±0.25 .385±.010 CTS 2.03 .080 DATE CODE PART NO. 1.27±0.13 .050±.005 7.60 .299 2.54 TYP. .100 DIMENSION: 2.03 .080 0.89 .035 6.35 TYP. .250 9.12±0.35 .359±.014 0.48±0.08 .019±.003 TYP. 0.38 .015 +0 10.40 -0.30 .410 +.0 -.012 mm inch SLIDE TRAVEL 0.25±0.08 .010±.003 +0.38 7.62 -0.13 .300 +.015 -.005 DPDT / 4PST Ordering Information “ON” WHEN ACTUATOR IS TOWARD THE DOT "A" 1 DPDT DPDT/4PST Switches ±0.25 ±.010 3 4.06 .160 9.78±0.25 .385±.010 CTS SCHEMATIC 2.03 .080 PART NO. DATE CODE "A" ±0.25 ±.010 1 O N 4PST DIMENSION: 8.89 TYP. .350 3 4.06 9.78±0.25 .160 .385±.010 CTS 2.03 .080 SCHEMATIC "A" No. of Overall Switch Dimension Positions Actuation Part No 12.34 / .486 1 DPDT/4PST 204-221/204-411 22.50 / .886 2 DPDT/4PST 204-222/204-412 32.66 / 1.286 3 DPDT/4PST 204-223/204-413 PART NO. DATE CODE 2.54 TYP. .100 0.38 .015 1.27±0.13 .050±.005 7.60 .299 9.12±0.35 .359±.014 0.25±0.08 .010±.003 7.62 +0.38 -0.13 .300 +.015 -.005 0.48±0.08 TYP. .019±.003 10.40+0 -0.30 .410 +0 -.012 mm inch 3-4 CTS Electrocomponents 2.03 SLIDE .080 TRAVEL 0.89 .035 ©2013 CTS Corporation. All rights reserved. Information subject to change. 2/05/13 www.ctscorp.com Low Profile Actuators (Available in SPST and SPDT ) ±0.25 ±.010 "A" O 1 N 2 3 4 2.03 .080 5 SURFACE MOUNT PAD LAYOUTS (ALL STYLES) 11 12 4.06 .160 2.44 .096 9.78±0.25 .385±.010 CTS 1.27 .05 DA TE CODE 2.54 .100 1.27±0.13 .050±.005 7.6 .299 2.54 .100 0.48±0.08 .019±.003 1.13 .044 TYP. 9.12±0.35 TY P. 0.38 .015 .359±.014 TYP. 0.25±0.08 .010±.003 TYP. +0 10.40 -0.30 +0 .410 -0.12 DIMENSION: 11.04 .435 6.17 .243 8.60 .339 +0.38 7.62 -0.13 .300 +.015 -.005 mm inch Ordering Information 204 – 1 2 1 E S NUMBER OF POLES BLANK – (FOR SPST) 1 – SINGLE POLE 2 – DOUBLE POLES 3 – 3 POLES 4 – 4 POLES NUMBER OF THROWS BLANK – (FOR SPST) 1 – SINGLE THROW 2 – DOUBLE THROWS – 1 POSITION – 2 POSITIONS – 3 POSITIONS – 4 POSITIONS – 5 POSITIONS – 6 POSITIONS – 7 POSITIONS – 8 POSITIONS – 9 POSITIONS – 10 POSITIONS – 12 POSITIONS R ACTUATOR HEIGHT TOP TAPE SEAL BLANK – STANDARD(0.89mm/.035") E – EXTENDED(3.43mm/.135") LP – LOW PROFILE(Flush) BLANK –NO TOP TAPE SEAL T –TOP TAPE SEAL * *Extended: SPST only * Low profile: SPST & SPDT only * NUMBER OF SWITCH POSITIONS 1 2 3 4 5 6 7 8 9 10 12 T N * available on extended * Not actuator TAPE AND REEL BLANK - ANTI-STATIC TUBE PACKAGING R - TAPE & REEL PACKAGING ACTUATION PRESET BLANK – SHIP AT "OFF" POSITION N – SHIP AT "ON" POSITION BOTTOM EPOXY SEAL BLANK - NO EPOXY SEAL S - EPOXY SEAL 4-4 CTS Electrocomponents ©2013 CTS Corporation. All rights reserved. Information subject to change. 2/05/13 www.ctscorp.com