Series 206 RA/ 208 RA DIP ® Right Angle Panel DIP Switches Features Optimized Mechanical Features • Designed for panel applications Saves cost of right angle socket • Multiple circuit configurations available • Standard 2.54mm (.100") x 2.54mm (.100") centers, uses minimum PCB real estate • Sealed version optional: assures contaminant-free switch operation after wave soldering and cleaning • Available with low profile, standand, or extended actuators for SPST circuitry Optimized Contact System • Contact wiping action on make and break • Integral terminal and contact locked into high temperature plastic base • Electrostatic discharge shield rated to 22 KV Materials • Series 206RA, gold plated contacts for long-term contact corrosion resistance • Series 208RA, tin plated contacts • All UL 94 V-0 plastics used • RoHS compliant Series 206RA – Premium Gold Plated Contacts Series 208RA – Economical Tin Plated Contacts Electrical and Mechanical Specifications Switch Function SPST - 2 through 10 and 12 positions SPDT&DPST- 1 through 6 positions DPDT&4PST - 1 through 3 positions 3PST - 1 through 4 positions Switch Contact Resistance Switch Series 206RA 208RA Initial, max. 50 milliohms 100 milliohms End of life , max. 100 milliohms 500 milliohms Insulation Resistance 1,000 megohms minimum between insulated terminals Dielectric Strength 500 VAC for 1 minute between adjacent switches Nonswitching Rating 100 mA or 50 VDC maximum Switch Capacitance 5.0 pF maximum between adjacent closed switches Operating Temperature –55°C to +85°C 1-2 CTS Electrocomponents Actuation Life Series 206RA: 10,000 cycles switching 50 mA @ 24 VDC Series 208RA: 2,000 cycles switching 50 mA @ 24 VDC Allowable Solder Time Wave soldering up to 5 seconds at 260°C Vibration Per MIL-STD-202F, method 204D, condition B (.06" or 15 G's between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond Shock Per MIL-STD-202F, method 213B, condition A (50 G’s) with no contact inconsistencies greater than 1 microsecond Sealing Bottom epoxy seal optional Top tape seal optional Marking Special side or top marking available-consult CTS Packaging Standard : Anti-Static tube packaging © 2008 CTS Corporation. All rights reserved. Information subject to change. 05/02/08 www.ctscorp.com SPST Series 206RA/208RA 7.24 0.89 .285 .035 1 2 4 3 5 6 7 9 10 11 12 8 4.06 N O .160 MOUNTING 9.78±0.25 SURFACE 3.85±0.01 CTS ±5° 0.38 3.05 +0.25 -0.51 .120 +.010 -.020 85° .015 2.54 TYP. .100 0.48±0.08 .019±.003 +0.51 1.27 .050 .100 2.29 -0 .090 +.020 -.0 TYP. 8.13 .320 4.32 ±0.76 DATE CODE PART NO. "A" 2.54 .170 ±.030 RECOMMENDED PC BOARD PIERCING ±0.25 ±.010 2.54 .100 TYP. Ø1.17 TYP .046 TYP. 2.54 .100 TYP. DIMENSION: mm inch Please find panel drawing of 206/208 RA DIP switches with SPDT,DPST,DPDT,3PST, or 4PST circuitry from 206/208 series date sheet Ordering Information 206/208 – 1 2 1 RA E S N T BOTTOM EPOXY SEAL NUMBER OF POLES BLANK – (FOR SPST) 1 – SINGLE POLE 2 – DOUBLE POLES 3 – 3 POLES 4 – 4 POLES BLANK - NO EPOXY SEAL S - EPOXY SEAL NUMBER OF THROWS ACTUATION PRESET BLANK – (FOR SPST) 1 – SINGLE THROW 2 – DOUBLE THROWS BLANK – SHIP AT "OFF" POSITION N – SHIP AT "ON" POSITION NUMBER OF SWITCH POSITIONS TOP TAPE SEAL 1 – 1 POSITION 2 – 2 POSITIONS 3 – 3 POSITIONS 4 – 4 POSITIONS 5 – 5 POSITIONS 6 – 6 POSITIONS 7 – 7 POSITIONS 8 – 8 POSITIONS 9 – 9 POSITIONS 10 – 10 POSITIONS 12 – 12 POSITIONS BLANK – NO TOP TAPE SEAL T – TOP TAPE SEAL Not available on extended actuator * * ACTUATOR HEIGHT BLANK – STANDARD(0.89mm/.035") E – EXTENDED(3.43mm/.135") * * * * LP – LOW PROFILE(Flush) Extended: SPST only Low profile: SPST & SPDT only Standard Part # Dimensions "A" Overall (mm/inch) 7.26 / .286 9.80 / .386 12.34 / .486 14.88 / .586 17.42 / .686 19.96 / .786 22.50 / .886 25.04 / .986 27.58 / 1.086 32.66 / 1.286 SPST Switches No of SW positions 2 3 4 5 6 7 8 9 10 12 2-2 CTS Electrocomponents SPDT&DPST Switches SPST P/N No of SW positions 206/208- 2 RA 1 206/208- 3 RA — 206/208- 4 RA 2 206/208- 5 RA — 206/208- 6 RA 3 206/208- 7 RA — SPDT P/N DPST P/N 206/208-121RA 206/208-211RA — — 206/208-122RA 206/208-212RA — — 206/208-123RA 206/208-213RA — — 206/208- 8 RA 4 206/208- 9 RA — 206/208-10 RA 5 206/208-125RA 206/208-215RA 206/208-12 RA 6 206/208-126RA 206/208-216RA 206/208-124RA 206/208-214RA — — DPDT/ 4PST Switches 3PST Switches No of SW positions No of SW positions 3PST P/N — — — 1 206/208-311RA — — — 1 — — — — 2 206/208-312RA — — — — — — — — — — 2 3 206/208-313RA — — — — — — — — 4 206/208-314RA 3 © 2008 CTS Corporation. All rights reserved. Information subject to change. DPDT P/N — 4PST P/N — — 206/208-221RA 206/208-411RA — 206/208-222RA 206/208-412RA 206/208-223RA 206/208-413RA 05 / 02/08 www.ctscorp.com