Dipped Radial Capacitors Tape and Reel Packaging SOLID TANTALUM RESIN DIPPED TAP/TEP TAPE AND REEL PACKAGING FOR AUTOMATIC COMPONENT INSERTION TAP/TEP types are all offered on radial tape, in reel or ‘ammo’ pack format for use on high speed radial automatic insertion equipment, or preforming machines. The tape format is compatible with EIA 468A standard for component taping set out by major manufacturers of radial automatic insertion equipment. TAP/TEP – available in three formats. See page 142 for dimensions. ⌬P P2 ⌬h ‘B’ wires for normal automatic insertion on 5mm pitch. BRW suffix for reel BRS suffix for ‘ammo’ pack Available in case sizes A - J H3 W2 d H L H1 W1 S W D P1 T P ⌬P P2 ⌬h ‘C’ wires for preforming. H3 L CRW suffix for reel CRS suffix for ‘ammo’ pack W2 d H H1 W1 S W Available in case sizes A - R D P1 T P ⌬P P2 ⌬h ‘S’ and ‘D’ wire for special applications, automatic insertion on 2.5mm pitch. H3 W2 d H2 L H1 W1 S SRW, DTW suffix for reel SRS, DTS suffix for ‘ammo’ pack Available in case sizes A - J W D T P1 P S wire JANUARY 2014 ■ 141 Dipped Radial Capacitors Tape and Reel Packaging SOLID TANTALUM RESIN DIPPED TAP/TEP CASE DIMENSIONS: millimeters (inches) Description Code Dimension Feed hole pitch P 12.7 ± 0.30 (0.500 ± 0.010) Hole center to lead P1 3.85 ± 0.70 (0.150 ± 0.030) to be measured at bottom of clench REEL CONFIGURATION AND DIMENSIONS: millimeters (inches) Diameter 30 (1.18) max. 5.05 ± 1.00 (0.200 ± 0.040) for S wire Hole center to component center P2 6.35 ± 0.40 (0.250 ± 0.020) Change in pitch Δp ± 1.00 (± 0.040) 53 (2.09) max. Lead diameter d 0.50 ± 0.05 (0.020 ± 0.003) Lead spacing S See wire form table Component alignment Δh 0 ± 2.00 (0 ± 0.080) Feed hole diameter D 4.00 ± 0.20 (0.150 ± 0.008) Tape width W 18.0 + 1.00 (0.700 + 0.040) - 0.50 - 0.020) Hold down tape width W1 6.00 (0.240) min. Hold down tape position W2 1.00 (0.040) max. Lead wire clench height H 16.0 ± 0.50 (0.630 ± 0.020) 19.0 ± 1.00 (0.750 ± 0.040) on request Hole position H1 9.00 ± 0.50 (0.350 ± 0.020) Base of component height H2 18.0 (0.700) min. (S wire only) Component height H3 32.25 (1.300) max. Length of snipped lead L 11.0 (0.430) max. Total tape thickness T 0.70 ± 0.20 (0.030 ± 0.001) 45 (1.77) max. 40 (1.57) min. 80 (3.15) 360 (14.17) max. Manufactured from cardboard with plastic hub. cardboard with plastic hub. Holding tape outside Holding tape outside. Positive terminal leading. Carrying card 0.50 ± 0.10 (0.020 ± 0.005) PACKAGING QUANTITIES For Reels Style Case size A TAP TEP For bulk products For ‘Ammo’ pack No. of pieces Style 1500 B, C, D 1250 E, F 1000 G, H, J 750 K, L, M, N, P, R 500 TAP TEP Case size 3000 E, F, G 2500 H, J 2000 K, L, M, N, P, R 1000 AMMO PACK DIMENSIONS millimeters (inches) max. Height 360 (14.17), width 360 (14.17), thickness 60 (2.36) 142 ■ JANUARY 2014 No. of pieces A, B, C, D Style TAP TEP Case size No. of pieces A to H 1000 J to L 500 M to R 100 GENERAL NOTES Resin dipped tantalum capacitors are only available taped in the range of case sizes and in the modular quantities by case size as indicated. Packaging quantities on tape may vary by ±1%.