SMPS Capacitors Surface Mount and Through-Hole Series (SM0, SM5) D HOW TO ORDER SM0 1 7 C 106 M A N 650 1 23 4 5 6 78 9 1 AVX Style: CHIP SEPARATION 0.254 (0.010) TYP. E 1.397 (0.055) ±0.254 (0.010) B A Size: SM0 = Uncoated SM5 = Epoxy coated (add .005" to max. and NOM dimensions A, B, D & E) 2 Size: (See dimensions chart) 3 Voltage: 50V = 5, 100V = 1, 200V = 2, 500V = 7 4 Temperature Coefficient: C0G = A, X7R = C, Z5U = E 5 Capacitance Code 6 Capacitance Tolerance: C0G: J = ±5% X7R: K = ±10% Z5U: Z = +80, -20% K = ±10% M = ±20% P = GMV M = ±20% Z = +80, (+100, -0%) -20% 7 Failure Rate: A = Does not apply 8 Termination: N = Straight Lead J = Leads formed in L = Leads formed out T = Ni Plate Solder plate (Chips only SM04 and SM05 sizes C0G and X7R only) 9 Height: (.650 is standard maximum thickness for 5 chip stack see dimensions chart reference dimension A) 6.35 (0.250) MIN. 0.254 (0.010) TYP. 0.508 (0.020) TYP. 2.54 (0.100) TYP. C 2.54 (0.100) MAX. 0.635 (0.025) MIN. "N" STYLE LEADS 0.254 (0.010) RAD. (TYP.) 1.27 (0.050) MIN. (TYP.) 1.778 (0.070) ±0.254 (0.010) "J" STYLE LEADS 0.254 (0.010) RAD. (TYP.) 1.27 (0.050) MIN. (TYP.) 1.778 (0.070) ±0.254 (0.010) "L" STYLE LEADS Dimensions: millimeters (inches) Style SM-1 SM-2 SM-3 SM-4 SM-5 SM-6 A (max.) 16.5 16.5 16.5 16.5 16.5 16.5 (0.650) (0.650) (0.650) (0.650) (0.650) (0.650) B (max.) 18.0 18.0 18.0 18.0 18.0 18.0 (0.710) (0.710) (0.710) (0.710) (0.710) (0.710) Standard Packaging C ±.025 11.4 20.3 11.4 10.2 6.35 31.8 D ±.025 (0.450) (0.800) (0.450) (0.400) (0.250) (1.250) 52.1 38.4 26.7 10.2 6.35 52.1 (2.051) (1.512) (1.051) (0.400) (0.250) (2.051) 12.7 22.1 12.7 11.2 7.62 34.3 Trays No. of leads per side E (max.) (0.500) (0.870) (0.500) (0.440) (0.300) (1.350) SM-1 SM-2 SM-3 SM-4 SM-5 SM-6 20 15 10 4 3 20 6 12 20 25/40 25/70 6 Note: Dimensions A & B are max. dimensions for 5 chip stacks (.120 max. each chip). For SM-5 add .005" to max. and NOM dimensions A, B, D, & E Maximum Capacitance Available Versus Style AVX Style SM-1 SM-2 SM-3 SM-4 SM-5 SM-6 Max. Cap. (µF)* 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V C0G (NP0)*** 5.00 3.50 1.90 0.90 6.00 5.00 2.80 1.30 2.30 1.90 1.00 0.45 0.80 0.65 0.35 0.12 0.25 0.20 0.10 0.05 16.0 12.0 6.50 2.50 X7R 130.0 60.0 27.0 13.0 200.0 90.0 42.0 20.0 90.0 30.0 14.0 6.50 36.0 9.00 5.50 2.00 12.00 3.40 1.60 0.80 400 200 120 45.0 Z5U 420.0 160.0 60.0 –– 590.0 230.0 170.0 –– 200.0 75.0 30.0 –– 60.0 23.0 15.0 –– 23.0 9.00 3.60 –– 1300 720 460 –– No. of Leads/side** 20 15 10 4 3 20 Standard Max. Stack* 5 5 5 5 5 5 * Values given are for 5 chips stacked. For maximum per chip divide by 5. Maximum thickness per individual chip equals 3.05mm (0.120"). ** Based on 2.54mm (0.100") centers. *** TC FORMULATIONS AVAILABLE UPON REQUEST. Note: Contact factory for other voltage ratings. Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #017. Visit our website http://www.avxcorp.com 17