DiPGuard® 2 Pin DIP L SEE NOTE 1 H1 MAX. H2 MAX. .015 MIN. .148 ±.028 SEE NOTE 2 .325 ±.035 .012 ±.004 AVX MD series is a Molded 2 Pin DIP capacitor. We offer NP0, X7R, and Z5U dielectrics. Voltages available are 50 and 100Vdc. T MAX. .400 max. .019 ± .004 .0575 ± .0125 Check for up-to-date CV Tables at http://www.avx.com/docs/catalogs/dipguard.pdf 60° TYP. ±20° Note 1 = Leads centered within ±.010" Note 2 = Angle shall be 95°, +10°, -5° .019 ±.004 .010 MAX. HOW TO ORDER MD01 AVX Style MD01 CKR22* CKS22** MD02 CKR23* CKS23* MD03 CKR24* CKS24** 5 E Voltage Temperature Coefficient Y = 16V 5 = 50V 1 = 100V A = C0G (NP0) C = X7R E = Z5U 104 M A B Capacitance Capacitance Tolerance Failure Rate A = Not Applicable Assembly Method First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. C0G (NP0) EIA Characteristic AVX Style Cap. in pF* 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 Cap. in pF* 4700 6800 10000 MD015A100KAB MD015A150KAB MD015A220KAB MD015A330KAB MD015A470KAB MD015A680KAB MD015A101KAB MD015A151KAB MD015A221KAB MD015A331KAB MD015A471KAB MD015A681KAB MD015A102KAB MD015A152KAB MD015A222KAB MD015A332KAB AVX Style C0G (NP0): F = ±1% J = ±5% K = ±10% X7R: J = ±5% K = ±10% M = ±20% X7R C0G (NP0) MD01 WVDC 100 50 MD02 WVDC 100 50 MD025A472KAB MD025A682KAB MD025A103KAB EIA Characteristic AVX Style Cap. in pF* 220 330 470 680 1000 1500 2200 3300 4700 6800 10,000 15,000 22,000 33,000 47,000 68,000 100,000 Cap. in pF* 150,000 220,000 For other voltages and tolerances see Part No. Codes. Cap. in pF* 330,000 470,000 680,000 1,000,000 MD015C221KAB MD015C331KAB MD015C471KAB MD015C681KAB MD015C102KAB MD015C152KAB MD015C222KAB MD015C332KAB MD015C472KAB MD015C682KAB MD011C103KAB MD015C153KAB MD015C223KAB MD015C333KAB MD015C473KAB MD015C683KAB MD015C104KAB AVX Style MD025C154KAB MD025C224KAB AVX Style A = Hand Assembled B = Automated Assembly Z5U X7R MD01 WVDC 100 50 EIA Characteristic AVX Style Cap. in pF* 10,000 15,000 22,000 33,000 47,000 68,000 100,000 150,000 220,000 330,000 Cap. in pF* 470,000 MD02 WVDC 100 50 MD03 WVDC 100 50 MD035C334KAA MD035C474KAA MD035C684KAA MD035C105KAA For other voltages and tolerances see Part No. Codes. 42 Z5U: M = ±20% Z = +80% -20% Cap. in pF* 680,000 1,000,000 MD015E103ZAB MD015E153ZAB MD015E223ZAB MD015E333ZAB MD015E473ZAB MD015E683ZAB MD015E104ZAB MD015E154ZAB MD015E224ZAB MD015E334ZAB AVX Style MD025E474ZAB AVX Style Z5U MD01 WVDC 100 50 MD02 WVDC 100 50 MD03 WVDC 100 50 MD035E684ZAA MD035E105ZAA For other voltages and tolerances see Part No. Codes. *Other capacitance values available upon special request. = Industry preferred values CKR Series Molded Ceramic Capacitors The CKR series of multilayer ceramic capacitors are molded radial and molded axial leaded devices. They provide a rugged construction and are designed specifically for military W L.D. applications. Terminations are Tin/Lead for improved solderability. Available to military specifications MIL-PRF39014, MIL-PRF-20 and MIL-C-11014. T L.S. Figure 1 L W W W L.D. 1.250 Min. L.D. 1.250 Min. L.D. L.S. L T L T L Figure 2 L.S. L.S. Figure 3 Figure 4 HOW TO ORDER Military Type Designation: Styles CKR04, CKR05, CKR06, CKR08, CKR11, CKR12, CKR14, CKR15, CKR16 Dash Number Option: MIL-PRF-39014/01 (Appropriate Dash Number) CKR05 BX Style VoltageTemperature Limits CK = General purpose, ceramic dielectric, fixed capacitors R = Established Reliability Parts 05 = Remaining two numbers identify shape and dimension 11 = Remaining two numbers identify shape and dimension First letter identifies temperature range. B = -55ºC to +125ºC Second letter identifies voltage-temperature coefficient. 104 K S (V) Capacitance Capacitance Tolerance Military Failure Rate Standoff Option K = ±10% M = ±20% M = 1% per 1000 hours P = 0.1% per 1000 hours R = 0.01% per 1000 hours S = 0.001% per 1000 hours Note: AVX reserves the right to substitute a lower failure rate part per MIL-PRF-39014. Substitutability for failure rate levels shall be as follows: To order standoff option, place “V” at the end of the part number. Example: CKR05BX104KSV First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10pF use “R” in place of decimal point, e.g., 1R4 = 1.4pF.) Capacitance Change with Reference to 25°C Second No Rated Letter Voltage Voltage X +15, -15% +15, -25% R Axial +15, -15% +15, -40% Only Failure Rate Level S (STD) (X-ray) R (STD) (No X-ray) P M PACKAGING REQUIREMENTS Will Replace Failure Rate Level R, P, M, L P, M, L M,L L MARKING RADIAL LEAD Packaging: 100 Pcs/bag; Radial Tape and Reel Packaging available upon request (2500 pcs./reel). Front CKR04/CKR05 Back J for JAN SIZE SPECIFICATIONS Per Mil Spec MIL-PRF-39014 Dimensions: Millimeters (Inches) Case Size Length (L) Width (W) Thickness (T) Lead Spacing (L.S.) Lead Diameter (L.D.) CKR04 (Fig. 2) 4.83±.25 4.83±.25 2.29±.25 (.190±.010) (.190±.010) (.090±.010) 2.54±.38 (.100±.015) .64±.05 (.025±.002) CKR05 (Fig. 1, 4) 4.83±.25 4.83±.25 2.29±.25 (.190±.010) (.190±.010) (.090±.010) 5.08±.38 (.200±.015) .64±.05 (.025±.002) CKR06 (Fig. 2, 3) 7.37±.25 7.37±.25 2.29±.25 (.290±.010) (.290±.010) (.090±.010) 5.08±.38 (.200±.015) .64±.05 (.025±.002) CKR08 (Fig. 2) 7.37±.25 7.37±.25 3.68±.38 (.290±.010) (.290±.010) (.145±.015) 5.08±.38 (.200±.015) .64±.05 (.025±.002) M390 14/01 1595 Abb. Military Part Number Military Slash Number Military Dash Number J AVX 0710 A CKR06/CKR08 M39014 2-1350 AVX Abb. Military Part Number Military Slash/Dash Number Mfg. I.D. Symbol Mfg. I.D. Symbol Date Code Lot Code Date Code Lot Code 0710A J 50V 105K J for JAN Voltage Rating Capacitance Value (3 digit Code) & Cap. Tol. 43 MIL 123 and Leaded Ceramic Capacitors HOW TO ORDER Military Type Designation: Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability M123 Mil-Spec Number A 01 Modification Slash Sheet Spec. Number BX B 103 K Temperature Characteristic Voltage Capacitance Code Capacitance Tolerance B = 50 C = 100 C = ±0.25pF D = ±0.5pF F = ±1% J = ±5% K = ±10% Capacitance change with reference to 25ºC over temperature range -55ºC to +125ºC Without With Rated Symbol Voltage DC Voltage BP 0 ± 30 ppm/ºC 0 ±30 ppm/ºC BX ±15, -15% ±15, -25% C Termination C = Copper, solder coated (type C-4 or C-5 of MIL-STD-1276) W = Copper clad steel, solder coated, 60 micro inches minimum. CROSS REFERENCE MIL-SPEC TEST REQUIREMENTS TEST DESCRIPTION NDT (Non-Destructive Test) Pre-Cap Visual (Pre-Encapsulation Visual Examination) D.P.A. (Destructive Physical Analysis) Pre-Cap Terminal Strength (Pre-Encapsulation Pull Test) Life Test (Lot by Lot) Low Voltage Humidity Thermal Shock 100 Cycles 44 MIL-PRF-39014 MIL-PRF-20 MIL-PRF-55681 100% Ultrasonic Scan or Neutron-Radiography MIL-PRF-123 No No No 100% No No No Lot by Lot—Pre-Termination Lot by Lot—Finished Product No No No Lot by Lot No No No Lot by Lot—1000 Hours No No No Lot by Lot No No No Lot by Lot No No No