RoHS Compliant SMPS Stacked MLC Capacitors (RM Style) Technical Information on SMPS Capacitors ELECTRICAL SPECIFICATIONS Temperature Coefficient C0G: A Temperature Coefficient - 0 ±30 ppm/°C, -55° to +125°C X7R: C Temperature Coefficient - ±15%, -55° to +125°C Dielectric Withstanding Voltage 25°C (Flash Test) C0G and X7R: 250% rated voltage for 5 seconds with 50 mA max charging current. (500 Volt units @ 750 VDC) Capacitance Test (MIL-STD-202 Method 305) C0G: 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz X7R: 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz Life Test (1000 hrs) C0G and X7R: 200% rated voltage at +125°C. (500 Volt units @ 600 VDC) Moisture Resistance (MIL-STD-202 Method 106) C0G, X7R: Ten cycles with no voltage applied. Dissipation Factor 25°C C0G: 0.15% Max @ 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz X7R: 2.5% Max @ 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz Insulation Resistance 25°C (MIL-STD-202 Method 302) C0G and X7R: 100K MΩ or 1000 MΩ-μF, whichever is less. Thermal Shock (MIL-STD-202 Method 107, Condition A) Immersion Cycling (MIL-STD-202 Method 104, Condition B) Resistance To Solder Heat (MIL-STD-202, Method 210, Condition B, for 20 seconds) Insulation Resistance 125°C (MIL-STD-202 Method 302) C0G and X7R: 10K MΩ or 100 MΩ-μF, whichever is less. Typical ESR Performance (mΩ) ESR @ 10KHz ESR @ 50KHz ESR @ 100KHz ESR @ 500KHz ESR @ 1MHz ESR @ 5MHz ESR @ 10MHz HOW TO ORDER RM0 AVX Style RM0 = Uncoated RM5 = Epoxy Coated 1 Aluminum Electrolytic 100μF/50V 300 285 280 265 265 335 560 Low ESR Solid Tantalum 100μF/10V 72 67 62 56 56 72 91 Solid Aluminum Electrolytic 100μF/16V 29 22 20 18 17 17 22 MLCC SMPS 100μF/50V 3 2 2.5 4 7 12.5 20 MLCC SMPS 4.7μF/50V 66 23 15 8 7.5 8 14 AVX Styles: RM-1, RM-2, RM-3, RM-4, RM-5, RM-6 7 C Size Voltage Temperature See 50V = 5 Coefficient Dimensions 100V = 1 C0G = A chart 200V = 2 X7R = C 500V = 7 106 M A N 650 Capacitance Code (2 significant digits + number of zeros) 10 pF = 100 100 pF = 101 1,000 pF = 102 22,000 pF = 223 220,000 pF = 224 1μF = 105 10 μF = 106 100 μF = 107 Capacitance Tolerance C0G: J = ±5% K = ±10% M = ±20% Test Level A = Standard Termination N = Straight Lead J = Leads formed in L = Leads formed out P = P Style Leads Z = Z Style Leads Height Max Dimension “A” 120 = 0.120" 240 = 0.240" 360 = 0.360" 480 = 0.480" 650 = 0.650" X7R: K = ±10% M = ±20% Z = +80%, -20% Note: Capacitors with X7R and Z5U dielectrics are not intended for applications across AC supply mains or AC line filtering with polarity reversal. Contact plant for recommendations. Performance of SMPS capacitors can be simulated by downloading SpiCalci software program http://www.avx.com/SpiApps/default.asp#spicalci Custom values, ratings and configurations are also available. 30 RoHS Compliant SMPS Stacked MLC Capacitors (RM Style) Surface Mount and Thru-Hole Sytles (RM0, RM5) CHIP SEPARATION 0.254 (0.010) TYP. D CHIP SEPARATION 0.254 (0.010) TYP. CAPACITOR E E 1.651 ± 0.254 (0.065 ± 0.010) B 1.397 (0.055) ±0.254 (0.010) A R 0.508 (0.020) 3 PLACES B 2.540 ± 0.254 (0.100 ± 0.010) 4.191 ± 0.254 (0.165 ± 0.010) DETAIL A 6.350 (0.250) MIN 0.254 (0.010) TYP. 0.508 (0.020) TYP. 2.54 (0.100) TYP. C 2.54 (0.100) MAX. 0.635 (0.025) MIN. 0.254 (0.010) TYP. C 1.016 ± 0.254 (0.040 ± 0.010) DETAIL A “N” STYLE LEADS “P” STYLE LEADS CHIP SEPARATION 0.254 (0.010) TYP. CHIP SEPARATION 0.254 (0.010) TYP. D E E 0.254 (0.010) RAD. (TYP.) B 0.254 (0.010) RAD. (TYP.) 1.397 (0.055) ±0.254 (0.010) A 0.254 (0.010) TYP. 1.905 (0.075) ±0.635 (0.025) TYP. 1.778 (0.070) 0.508 (0.020) TYP. 2.54 (0.100) TYP. ±0.254 (0.010) 2.54 (0.100) MAX. 0.635 (0.025) MIN. C 1.778 (0.070) ±0.254 (0.010) “J” STYLE LEADS C “L” STYLE LEADS 1.397 (0.055) ±0.254 (0.010) A 0.254 (0.010) TYP. B E RAD. 0.254 (0.010) (TYP) 1.270 ± 0.254 (0.050 ± 0.010) CHIP SEPARATION 0.254 (0.010) TYP. D 0.254 (0.010) TYP. 1.905 (0.075) ±0.635 (0.025) TYP. 2.794 ± 0.254 (0.110 ± 0.010) 6.35 (0.250) MIN. 1.778 ±0.254 (0.070 ± 0.010) C 0.508 (0.020) TYP. 2.54 (0.100) TYP. 3.048 ± 0.381 (0.120 ± 0.015) DETAIL B 2.54 (0.100) MAX. 0.635 (0.025) MIN. DETAIL B “Z” STYLE LEADS DIMENSIONS Style RM-1 RM-2 RM-3 RM-4 RM-5 RM-6 A (max.) millimeters (inches) B (max.) For “N” Style Leads: “A” Dimension Plus 1.651 (0.065) See page 32 for For “J” & “L” Style Leads: “A” Dimension Plus 2.032 (0.080) maximum “A” For “P” Style Leads: “A” Dimension Plus 4.445 (0.175) Dimension For “Z” Style Leads: “A” Dimension Plus 3.048 (0.120) C ±.635 (±0.025) 11.4 20.3 11.4 10.2 6.35 31.8 (0.450) (0.800) (0.450) (0.400) (0.250) (1.250) D ±.635 (±0.025) 52.1 38.4 26.7 10.2 6.35 52.1 (2.050) (1.510) (1.050) (0.400) (0.250) (2.050) E (max.) 12.7 22.1 12.7 11.2 7.62 34.3 (0.500) (0.870) (0.500) (0.440) (0.300) (1.350) No. of Leads per side 20 15 10 4 3 20 Note: For RM5 add 0.127 (0.005) to max. and nominal dimensions A, B, D, & E 31 RoHS Compliant SMPS Stacked MLC Capacitors (RM Style) Max Capacitance (μF) Available Versus Style with Height (A) of 0.120" - 3.05mm RM01 _ _ _ _ _ _ AN120 AVX STYLE RM02 _ _ _ _ _ _ AN120 RM03 _ _ _ _ _ _ AN120 100V 200V 500V RM04 _ _ _ _ _ _ AN120 RM05 _ _ _ _ _ _ AN120 RM06 _ _ _ _ _ _ AN120 50V 100V 200V 500V 50V 100V 200V 500V 50V 50V 100V 200V 500V 50V 100V 200V 500V 50V C0G 1.0 .70 .40 .18 1.2 1.0 .60 .26 .47 .40 .20 .09 .16 .13 .07 .02 .05 .04 .02 .01 3.2 2.4 1.3 .50 X7R 27 12 7.0 2.6 41 18 11 4.0 18 3.6 1.3 7.5 1.8 1.1 .40 2.8 .68 .40 .16 80 24 9.4 6.0 100V 200V 500V 40 Max Capacitance (μF) Available Versus Style with Height (A) of 0.240" - 6.10mm RM01 _ _ _ _ _ _ AN240 AVX STYLE RM02 _ _ _ _ _ _ AN240 RM03 _ _ _ _ _ _ AN240 100V 200V 500V RM04 _ _ _ _ _ _ AN240 RM05 _ _ _ _ _ _ AN240 RM06 _ _ _ _ _ _ AN240 50V 100V 200V 500V 50V 100V 200V 500V 50V 50V 100V 200V 500V 50V 100V 200V 500V 50V C0G 2.0 1.4 .80 .36 2.4 2.0 1.2 .52 1.0 .80 .40 .18 .32 .26 .14 .05 .10 .08 .05 .02 6.4 4.8 2.6 1.0 X7R 54 24 14 5.2 82 36 22 8.0 36 7.2 2.6 15 3.6 2.2 .80 5.6 1.3 .80 .32 160 80 48 18 12 100V 200V 500V Max Capacitance (μF) Available Versus Style with Height (A) of 0.360" - 9.14mm RM03 _ _ _ _ _ _ AN360 RM04 _ _ _ _ _ _ AN360 RM05 _ _ _ _ _ _ AN360 RM06 _ _ _ _ _ _ AN360 50V RM01 _ _ _ _ _ _ AN360 100V 200V 500V 50V 100V 200V 500V 50V 50V 100V 200V 500V 50V 100V 200V 500V 50V C0G 3.0 2.1 1.2 .54 3.6 3.0 1.8 .78 1.5 1.2 .60 .27 .48 .39 .21 .07 .15 .12 .07 .03 9.6 7.2 3.9 1.5 X7R 82 36 21 7.8 120 54 33 12 54 10 3.9 22 5.4 3.3 1.2 8.2 2.0 1.2 .48 240 120 72 28 AVX STYLE RM02 _ _ _ _ _ _ AN360 100V 200V 500V 18 100V 200V 500V Max Capacitance (μF) Available Versus Style with Height (A) of 0.480" - 12.2mm RM01 _ _ _ _ _ _ AN480 AVX STYLE RM02 _ _ _ _ _ _ AN480 RM03 _ _ _ _ _ _ AN480 100V 200V 500V RM04 _ _ _ _ _ _ AN480 RM05 _ _ _ _ _ _ AN480 RM06 _ _ _ _ _ _ AN480 50V 100V 200V 500V 50V 100V 200V 500V 50V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V C0G 4.0 2.8 1.6 .72 4.8 4.0 2.2 1.0 2.0 1.6 .80 .36 .64 .52 .28 .10 .20 .16 .10 .04 12 9.6 5.2 2.0 X7R 110 48 28 10 160 72 44 16 72 14 5.2 30 7.2 4.4 1.6 10 2.7 1.6 .64 320 160 96 37 24 Max Capacitance (μF) Available Versus Style with Height (A) of 0.650" - 16.5mm RM03 _ _ _ _ _ _ AN650 RM04 _ _ _ _ _ _ AN650 RM05 _ _ _ _ _ _ AN650 RM06 _ _ _ _ _ _ AN650 50V RM01 _ _ _ _ _ _ AN650 100V 200V 500V 50V 100V 200V 500V 50V 50V 100V 200V 500V 50V 100V 200V 500V 50V C0G 5.0 3.5 2.0 .90 6.0 5.0 3.0 1.3 2.5 2.0 1.0 .47 .80 .65 .35 .12 .25 .20 .12 .05 16 6.5 2.5 X7R 130 60 35 13 200 90 55 20 90 18 6.5 36 9.0 5.5 2.0 12 3.4 2.0 .80 400 200 120 47 AVX STYLE 32 RM02 _ _ _ _ _ _ AN650 100V 200V 500V 30 100V 200V 500V 12