Specialty Connectors

MOBO® Connectors
www.avx.com
AVX Specialty Catalog
Version 15.2
INTERCONNECT
Table of Contents
INTERCONNECT
BATTERY CONNECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-35
Standard 2.5mm Pitch 9155-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Ultra-Low Profile 2.5mm Pitch 9155-100
Reduced 2.5mm Pitch 9155-200
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-22
Right Angle 3.0mm Pitch 9155-300
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-29
Right Angle 2.5mm Pitch 9155-500
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-36
BATTERY CONTACTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-39
Single Contact 70-9155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-39
I/O CONNECTORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-60
Standard I/O, 15 Position, XX-9157
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-47
Standard I/O, 19 Position, XX-9157
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-50
Reduced Size I/O, 16 Position XX-9257 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-56
Mini I/O, 12 Position XX-9257
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-60
SIM CARD CONNECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61-74
SIM BLOCK 9162-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61-62
Slide-In SIM 9162-200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63-66
Locking SIM 9162-300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67-68
Slide-In Low Profile SIM 9162-400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-71
SIM/Micro SD Combination 9162-500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72-74
WTB COAX CONNECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-78
IDC SMT COAX 1 POSITION 00-9178 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-78
NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements,
information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any
kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that
any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety
measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all applications.
FEBRUARY 2015
■1
Standard 2.5mm Pitch Battery
INTERCONNECT
9155-000
The standard battery connector is specifically designed for mobile
equipment.
The connectors are available in 3, 4 and 5 contact positions all on a 2.50mm
pitch. The insulator height provides a 3mm spacing, with various contact
nose heights from 1.20mm to 2.60mm, to provide spacing options to the
end user.
All contacts are stamped and are rated to 3A, with Gold plating. Parts are
supplied in tape and reel for automatic pick and place. Optional retaining
brackets are available to provide greater strength when connected to the
PCB.
Whatever your requirements, the 9155 series Battery Connector can also be
customized to suit your applications.
APPLICATIONS
•
•
•
•
•
FEATURES AND BENEFITS
•
•
•
•
Mobile Phones
PDA
Medical
PMR
Industrial
Suitable for 5000 mechanical cycles.
Variety of contact heights offered to suit different mechanical designs.
Connectors can be end to end stackable.
RoHS Compliant available.
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 3 Amp / Contact
• Voltage Rating: 125 VAC
• Operating Temperature:
-40ºC to +125ºC
• Insulator Material: Glass-Filled Nylon 46;
UL94 V-O
• Contact Material: Beryllium Copper
• Plating: Gold over Nickel
• Durability: 5000 Cycles
HOW TO ORDER
STANDARD
00
9155
00X
00
X
01
Prefix
00 = Standard
58 = Special
Series
No of
Ways
3 = 003
4 = 004
5 = 005
Standard Battery
Connector
00 = Standard Force
Contact Height
1 = 1.20 (0.047) / 1.65 (0.064)
2 = 1.80 (0.071) / 2.10 (0.083)
3 = 2.30 (0.091) / 2.60 (0.102)
Bracket
01 = With Bracket
X
Plating Option
6 = 0.4μm Selective Gold,
Standard
8 = 0.8μm Selective Gold,
Special Order
REDUCED NOSE
00
9155
00X
05
X
01
Prefix
00 = Standard
58 = Special
Series
No of
Ways
3 = 003
4 = 004
5 = 005
Standard Battery
Connector
05 = Reduced Nose
Contact Height
1 = 1.20 (0.047) / 1.50 (0.059)
2 = 1.80 (0.071) / 2.10 (0.083)
3 = 2.30 (0.091) / 2.60 (0.102)
Bracket
01 = With Bracket
2 ■ FEBRUARY 2015
X
Plating Option
6 = 0.4μm Selective Gold,
Standard
8 = 0.8μm Selective Gold,
Special Order
Standard 2.5mm Pitch Battery
INTERCONNECT
9155-000
3 WAY BATTERY CONNECTOR
NOTES:
1. FOR MORE INFORMATION REFER TO PRODUCT SPEC 201-01-050.
2. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
3. FOR MATING PAD DETAILS REFER TO PAGE 6.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
7. BRACKET MATERIAL: PHOSPHOR BRONZE.
8. BRACKET PLATING: PURE TIN OVER NICKEL.
MATING CONDITIONS
PACKING DETAILS
PCB BOARD LAYOUT
REEL QTY
LEADER
TRAILER
REEL / BOX
1000
500MM
500MM
5
FEBRUARY 2015
■3
Standard 2.5mm Pitch Battery
INTERCONNECT
9155-000
4 WAY BATTERY CONNECTOR
NOTES:
1. FOR MORE INFORMATION REFER TO PRODUCT SPEC 201-01-050.
2. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
3. FOR MATING PAD DETAILS REFER TO PAGE 6.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
7. BRACKET MATERIAL: PHOSPHOR BRONZE.
8. BRACKET PLATING: PURE TIN OVER NICKEL.
MATING CONDITIONS
PCB BOARD LAYOUT
4 ■ FEBRUARY 2015
PACKING DETAILS
REEL QTY
LEADER
TRAILER
REEL / BOX
1000
500MM
500MM
5
Standard 2.5mm Pitch Battery
INTERCONNECT
9155-000
5 WAY BATTERY CONNECTOR
NOTES:
1. FOR MORE INFORMATION REFER TO PRODUCT SPEC 201-01-050.
2. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
3. FOR MATING PAD DETAILS REFER TO PAGE 6.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
7. BRACKET MATERIAL: PHOSPHOR BRONZE.
8. BRACKET PLATING: PURE TIN OVER NICKEL.
MATING CONDITIONS
PCB BOARD LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
REEL / BOX
1000
500MM
500MM
5
FEBRUARY 2015
■5
Standard 2.5mm Pitch Battery
INTERCONNECT
9155-000
STANDARD BATTERY – MATING PADS
3 WAY MATING PADS
4 WAY MATING PADS
5 WAY MATING PADS
NOTES:
1. SUGGESTED MATING PADS FOR STANDARD BATTERY CONNECTORS.
2. OUTLINE OF CONNECTOR.
3. PREFERED PLATING ON PADS GOLD OVER NICKEL.
4. PAD LENGTH MAY REQUIRE ADJUSTMENT OF MATCH THE CUSTOMERS ASSEMBLY.
5. REFERENCE DIMENSIONS.
6 ■ FEBRUARY 2015
Standard 2.5mm Pitch Battery
INTERCONNECT
9155-000
3 WAY BATTERY CONNECTOR REDUCED NOSE
NOTES:
1. FOR MORE INFORMATION REFER TO PRODUCT SPEC 201-01-050.
2. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
3. FOR MATING PAD DETAILS REFER TO PAGE 9.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
7. BRACKET MATERIAL: PHOSPHOR BRONZE.
8. BRACKET PLATING: PURE TIN OVER NICKEL.
MATING CONDITIONS
PACKING DETAILS
PCB BOARD LAYOUT
REEL QTY
LEADER
TRAILER
REEL / BOX
1000
500MM
500MM
5
FEBRUARY 2015
■7
Standard 2.5mm Pitch Battery
INTERCONNECT
9155-000
4 WAY BATTERY CONNECTOR REDUCED NOSE
NOTES:
1. FOR MORE INFORMATION REFER TO PRODUCT SPEC 201-01-050.
2. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
3. FOR MATING PAD DETAILS REFER TO PAGE 9.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
7. BRACKET MATERIAL: PHOSPHOR BRONZE.
8. BRACKET PLATING: PURE TIN OVER NICKEL.
MATING CONDITIONS
PCB BOARD LAYOUT
8 ■ FEBRUARY 2015
PACKING DETAILS
REEL QTY
LEADER
TRAILER
REEL / BOX
1000
500MM
500MM
5
Standard 2.5mm Pitch Battery
INTERCONNECT
9155-000
5 WAY BATTERY CONNECTOR REDUCED NOSE
NOTES:
1. FOR MORE INFORMATION REFER TO PRODUCT SPEC 201-01-050.
2. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
3. FOR MATING PAD DETAILS REFER TO PAGE 9.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
7. BRACKET MATERIAL: PHOSPHOR BRONZE.
8. BRACKET PLATING: PURE TIN OVER NICKEL.
MATING CONDITIONS
PCB BOARD LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
REEL / BOX
1000
500MM
500MM
5
FEBRUARY 2015
■9
Standard 2.5mm Pitch Battery
INTERCONNECT
9155-000
STANDARD BATTERY – MATING PADS
3 WAY MATING PADS
4 WAY MATING PADS
5 WAY MATING PADS
NOTES:
1. SUGGESTED MATING PADS FOR STANDARD BATTERY CONNECTORS.
2. OUTLINE OF CONNECTOR.
3. PREFERED PLATING ON PADS GOLD OVER NICKEL.
4. PAD LENGTH MAY REQUIRE ADJUSTMENT OF MATCH THE CUSTOMERS ASSEMBLY.
5. REFERENCE DIMENSIONS.
10 ■ FEBRUARY 2015
Ultra-Low Profile
2.5mm Pitch Battery
INTERCONNECT
9155-100
AVX has been leading the industry with reliable Board-to-Board (BTB)
compression connectors for commercial, medical and harsh industrial
applications, obtaining the very first contact patent in the early 1990’s.
The broad range of connectors offers both signal contacts which support
1 Amp/contact up to 40 position as well as low pin count (LPC) power
contacts up to 3 Amps/contact.
The newest addition is the Ultra Low Profile (ULP) power connector that
supports a 1.3mm compressed height, the lowest on the market. Gold
plated Beryllium Copper (BeCu) contacts offers the most reliable and
resilient contact performance in this miniature package. The sweeping
contact design offers 0.7mm deflection range, long contact wipe and in
excess of 40 grams of contact force at minimum operating deflection. All
combined, this connector is rated at an unbelievable 5000 mating cycles
for mechanical endurance.
APPLICATIONS
FEATURES AND BENEFITS
• Low profile power, signal, ground or
shielding requirements
• Repeatable/Pluggable module or
battery pack requirements
• Low profile flex circuit to PCB
applications
• Portable devices
• High Reliability / High Cycle Life BeCu contacts for maximum system
performance
• ULP 1.3mm minimum operating height with 0.7mm “Z” axis
compression/tolerance range
• Gold plating supports a broad range applications based on reliability
and environments
• 3 Amp contact rating over a -40ºC to +105ºC operating range supports
a broad application spectrum
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 3 Amps/Contact
• Voltage Rating: 125VAC
• Operating Temperature:
-40ºC to +105ºC
• Insulator Material: Glass-Filled Nylon 46;
UL94 V-O
• Contact Material: Beryllium Copper
• Plating: Gold over Nickel
• Durability: 5000 Cycles
HOW TO ORDER
00
9155
00X
10X
Prefix
Series
No. of Ways
Low Profile
Battery Connector
2 = 002
3 = 003
Code
Description
Operating Height
Low Profile
100 Battery Connector
1.30 (0.051)
No Stop
Low Profile
101 Battery Connector
1.30 (0.051)
Stop
00X
Plating Option
Code
Description
006 0.4μm Selective Gold, Standard
008 0.8μm Selective Gold, Special Order
FEBRUARY 2015
■ 11
Ultra-Low Profile
2.5mm Pitch Battery
INTERCONNECT
9155-100
2 WAY LOW PROFILE CONNECTOR
NO STOP
SECTION A-A
SUGGESTED PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
12 ■ FEBRUARY 2015
1500
500MM
500MM
NOTES:
1. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO
SPECIFICATION 201-01-094.
2. MATERIALS: CONTACT - COPPER ALLOY,
INSULATOR - GLASS FILLED NYLON. COLOR: BLACK.
3. TOLERANCE ±0.20 UNLESS SPECIFIED.
4. PACKING DETAILS SEE TABLE.
5. FOR MATING PAD DETAILS REFER TO PAGE 16.
Ultra-Low Profile
2.5mm Pitch Battery
INTERCONNECT
9155-100
3 WAY LOW PROFILE CONNECTOR
NO STOP
SECTION A-A
SUGGESTED PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
1200
500MM
500MM
NOTES:
1. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO
SPECIFICATION 201-01-094.
2. MATERIALS: CONTACT - COPPER ALLOY,
INSULATOR - GLASS FILLED NYLON. COLOR: BLACK.
3. TOLERANCE ±0.20 UNLESS SPECIFIED.
4. PACKING DETAILS SEE TABLE.
5. 2 EQUAL PITCHES @ 2.50 = 5.00.
6. FOR MATING PAD DETAILS REFER TO PAGE 16.
FEBRUARY 2015
■ 13
Ultra-Low Profile
2.5mm Pitch Battery
INTERCONNECT
9155-100
2 WAY LOW PROFILE CONNECTOR
WITH STOP
SECTION A-A
SUGGESTED PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
14 ■ FEBRUARY 2015
1500
500MM
500MM
NOTES:
1. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO
SPECIFICATION 201-01-094.
2. MATERIALS: CONTACT - COPPER ALLOY,
INSULATOR - GLASS FILLED NYLON. COLOR: BLACK.
3. TOLERANCE ±0.20 UNLESS SPECIFIED.
4. PACKING DETAILS SEE TABLE.
5. FOR MATING PAD DETAILS REFER TO PAGE 16.
Ultra-Low Profile
2.5mm Pitch Battery
INTERCONNECT
9155-100
3 WAY LOW PROFILE CONNECTOR
WITH STOP
SECTION A-A
SUGGESTED PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
1200
500MM
500MM
NOTES:
1. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO
SPECIFICATION 201-01-094.
2. MATERIALS: CONTACT - COPPER ALLOY,
INSULATOR - GLASS FILLED NYLON. COLOR: BLACK.
3. TOLERANCE ±0.20 UNLESS SPECIFIED.
4. PACKING DETAILS SEE TABLE.
5. 2 EQUAL PITCHES @ 2.50 = 5.00.
6. FOR MATING PAD DETAILS REFER TO PAGE 16.
FEBRUARY 2015
■ 15
Ultra-Low Profile
2.5mm Pitch Battery
INTERCONNECT
9155-100
LOW PROFILE
MATING PADS
2 WAY MATING PADS
3 WAY MATING PADS
NOTES:
1. SUGGESTED MATING PADS FOR LOW PROFILE BATTERY CONNECTORS.
2. OUTLIE OF CONNECTOR.
3. PROFERED PLATING ON PADS GOLD OVER NICKEL.
4. REFERENCE DIMENSIONS.
5. DIMENSION TO EDGE OF BOARD FOR CONNECTORS WITH STOP.
16 ■ FEBRUARY 2015
Reduced Battery 2.5mm Pitch
INTERCONNECT
9155-200
The newest product in AVX’s Interconnect family of
battery connectors saves 50% in volume over the initial
9155 series compression connectors as illustrated in
the photograph. These connectors are rated at a full 3
amps per contact on 2.5mm centers. Sizes range from
2 positions through 5 positions and are end to end
stackable.
APPLICATIONS
•
•
•
•
FEATURES AND BENEFITS
•
•
•
•
•
Cellular Phones
Handheld Devices
Industrial Modules
Medical Electronics
2.4mm insulator height
3 amps/contact
Large SMT mounting area for positive mechanical attachment
5k mating cycles
End-to-end stackable
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 3 Amp / Contact
• Voltage Rating: 125 VAC
• Operating Temperature:
-40ºC to +125ºC
• Insulator Material: Glass-Filled Nylon 46;
UL94 HB
• Contact Material: Beryllium Copper
• Plating: Gold over Nickel
• Durability: 5000 Cycles
HOW TO ORDER
00
9155
00X
201
Prefix
Series
No. of Ways
2 = 002
3 = 003
4 = 004
5 = 005
Reduced Size
Battery Connector
Code
Description
Reduced Size
201
Battery Connector
00X
Plating Option
Code
Description
006 0.4μm Selective Gold, Standard
008 0.8μm Selective Gold, Special Order
FEBRUARY 2015
■ 17
Reduced Battery 2.5mm Pitch
9155-200
INTERCONNECT
2 WAY REDUCED SIZE BATTERY CONNECTOR
RECOMMENDED PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
18 ■ FEBRUARY 2015
2000
500MM
500MM
NOTES:
1. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-093.
2. FOR MATING PAD DETAILS REFER TO PAGE 22.
3. GENERAL TOLERANCE ±0.20.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 HB, COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
Reduced Battery 2.5mm Pitch
9155-200
INTERCONNECT
3 WAY REDUCED SIZE BATTERY CONNECTOR
RECOMMENDED PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
2000
500MM
500MM
NOTES:
1. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-093.
2. FOR MATING PAD DETAILS REFER TO PAGE 22.
3. GENERAL TOLERANCE ±0.20.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 HB, COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
FEBRUARY 2015
■ 19
Reduced Battery 2.5mm Pitch
9155-200
INTERCONNECT
4 WAY REDUCED SIZE BATTERY CONNECTOR
RECOMMENDED PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
20 ■ FEBRUARY 2015
2000
500MM
500MM
NOTES:
1. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-093.
2. FOR MATING PAD DETAILS REFER TO PAGE 22.
3. GENERAL TOLERANCE ±0.20.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 HB, COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
Reduced Battery 2.5mm Pitch
9155-200
INTERCONNECT
5 WAY REDUCED SIZE BATTERY CONNECTOR
RECOMMENDED PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
2000
500MM
500MM
NOTES:
1. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-093.
2. FOR MATING PAD DETAILS REFER TO PAGE 22.
3. GENERAL TOLERANCE ±0.20.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 HB, COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
FEBRUARY 2015
■ 21
Reduced Battery 2.5mm Pitch
INTERCONNECT
9155-200
REDUCED SIZE BATTERY CONNECTOR – MATING PADS
2 WAY MATING PADS
3 WAY MATING PADS
4 WAY MATING PADS
5 WAY MATING PADS
NOTES:
1. SUGGESTED MATING PADS FOR REDUCED SIZE BATTERY CONNECTORS.
2. OUTLINE OF CONNECTOR.
3. PREFERED PLATING ON PADS GOLD OVER NICKEL.
4. REFERENCE DIMENSIONS.
22 ■ FEBRUARY 2015
Right Angle 3.0mm Pitch Battery
INTERCONNECT
9155-300
A further addition to the battery connector range offered by
AVX is a 90 degree version. On a 3mm pitch, offered in 2 to
6 contact positions and rated as with all of the battery range
at 3 amps. The connector’s design is small and compact to
minimize its profile yet stable while having a contact point
4.61mm above the PCB.
The stability comes from the addition of extra SMT anchor
brackets that are in between the SMT contact pads and
both at the front of the connector and within the row of the
contact SMT pads.
As with the other 9155 series of battery connectors offered
by AVX the 90 degree version is rated at 3 amps and 5000
mating cycles, RoHS compliant and using high temperature
plastic enables the connectors to be processed at up to
260ºC.
APPLICATIONS
•
•
•
•
FEATURES AND BENEFITS
•
•
•
•
•
Mobile phones
Digital music players
Hand held terminals
Data terminals or any other
small portable device
Simple designed spring contact
End to end stackable for larger pin counts
Additional contact anchor brackets to added stability on the PCB
Robust to shock and vibration
Selectively plated contact area
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 3 Amp / Contact
• Voltage Rating: 125 VAC
• Operating Temperature:
-40ºC to +125ºC
• Insulator Material: Glass-Filled Nylon 46;
UL94 HB
• Contact Material: Beryllium Copper
• Plating: Gold over Nickel
• Durability: 5000 Cycles
HOW TO ORDER
00
9155
00X
301
Prefix
Series
No. of Ways
2 = 002
3 = 003
4 = 004
5 = 005
6 = 006
Right Angle
Battery Connector
Code
301
Description
Right Angle 3.00mm
Battery Connector
00X
Plating Option
Code
Description
006 0.4μm Selective Gold, Standard
008 0.8μm Selective Gold, Special Order
FEBRUARY 2015
■ 23
Right Angle 3.0mm Pitch Battery
INTERCONNECT
9155-300
2 WAY RIGHT ANGLE BATTERY CONNECTOR
PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
NOTES:
1. FOR MORE INFORMATION REFER TO PRODUCT SPEC 201-01-050.
2. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
3. FOR MATING PAD DETAILS REFER TO PAGE 29.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
7. BRACKET MATERIAL: PHOSPHOR BRONZE.
8. BRACKET PLATING: PURE TIN OVER NICKEL.
24 ■ FEBRUARY 2015
800
480MM
480MM
Right Angle 3.0mm Pitch Battery
INTERCONNECT
9155-300
3 WAY RIGHT ANGLE BATTERY CONNECTOR
PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
800
480MM
480MM
NOTES:
1. FOR MORE INFORMATION REFER TO PRODUCT SPEC 201-01-050.
2. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
3. FOR MATING PAD DETAILS REFER TO PAGE 29.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
7. BRACKET MATERIAL: PHOSPHOR BRONZE.
8. BRACKET PLATING: PURE TIN OVER NICKEL.
FEBRUARY 2015
■ 25
Right Angle 3.0mm Pitch Battery
INTERCONNECT
9155-300
4 WAY RIGHT ANGLE BATTERY CONNECTOR
PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
NOTES:
1. FOR MORE INFORMATION REFER TO PRODUCT SPEC 201-01-050.
2. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
3. FOR MATING PAD DETAILS REFER TO PAGE 29.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
7. BRACKET MATERIAL: PHOSPHOR BRONZE.
8. BRACKET PLATING: PURE TIN OVER NICKEL.
26 ■ FEBRUARY 2015
800
480MM
480MM
Right Angle 3.0mm Pitch Battery
INTERCONNECT
9155-300
5 WAY RIGHT ANGLE BATTERY CONNECTOR
PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
800
480MM
480MM
NOTES:
1. FOR MORE INFORMATION REFER TO PRODUCT SPEC 201-01-050.
2. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
3. FOR MATING PAD DETAILS REFER TO PAGE 29.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
7. BRACKET MATERIAL: PHOSPHOR BRONZE.
8. BRACKET PLATING: PURE TIN OVER NICKEL.
FEBRUARY 2015
■ 27
Right Angle 3.0mm Pitch Battery
INTERCONNECT
9155-300
6 WAY RIGHT ANGLE BATTERY CONNECTOR
PCB LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
NOTES:
1. FOR MORE INFORMATION REFER TO PRODUCT SPEC 201-01-050.
2. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
3. FOR MATING PAD DETAILS REFER TO PAGE 29.
4. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
5. CONTACT MATERIAL: BERYLLIUM COPPER.
6. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL. PURE TIN ON TAILS.
7. BRACKET MATERIAL: PHOSPHOR BRONZE.
8. BRACKET PLATING: PURE TIN OVER NICKEL.
28 ■ FEBRUARY 2015
800
480MM
480MM
Right Angle 3.0mm Pitch Battery
9155-300
INTERCONNECT
RIGHT ANGLE BATTERY CONNECTOR – MATING PADS
2 WAY MATING PADS
3 WAY MATING PADS
4 WAY MATING PADS
5 WAY MATING PADS
6 WAY MATING PADS
NOTES:
1. SUGGESTED MATING PADS FOR RIGHT ANGLE BATTERY CONNECTORS.
2. TOP SURFACE OF HORIZONTAL PCB/BASE OF CONNECTOR.
3. OUTLINE OF CONNECTOR.
4. PREFERED PLATING ON PADS GOLD OVER NICKEL.
FEBRUARY 2015
■ 29
Right Angle 2.5mm Pitch Battery
INTERCONNECT
9155-500
AVX extends the battery connector range with the addition of
a low profile 2.5mm pitch right angle connector. This
connector is offered in 2 to 5 positions and is rated at 3
amps. The connector’s design is small and compact to
minimize its profile yet functionally stable having a contact
point at 2.20mm above the PCB.
The unique design of this stamped contact allows for a
maximum insulator height of 4.0mm which makes it size
compatible with more expensive pogo pin style battery
connectors.
The complete family of battery connectors from AVX offer all
of the same advantages; Beryllium Copper base material for
enhanced contact performance, a full 3 amp current rating,
selective gold plating for 5000 mating cycles and high
temperature plastic for RoHS soldering.
APPLICATIONS
FEATURES AND BENEFITS
•
•
•
•
•
• Mobile Phones
• Digital Music Players
• Any Handheld Devices
Reliable stamped contact with coined nose
Full 1.5mm nose deflection for large operating range
Two anchor tabs for mechanical stability
5000 cycle durability rating
Minimized X, Y and Z package dimensions
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 3 Amp / Contact
• Voltage Rating: 125 VAC
• Operating Temperature:
-40ºC to +125ºC
• Insulator Material: Glass-Filled Nylon 46;
UL94 HB
• Contact Material: Beryllium Copper
• Plating: Gold over Nickel
• Durability: 5000 Cycles
HOW TO ORDER
00
9155
00X
541
Prefix
Series
No. of Ways
2 = 002
3 = 003
4 = 004
5 = 005
Right Angle
Battery Connector
30 ■ FEBRUARY 2015
Code
541
Description
Right Angle 2.5mm
Battery Connector
00X
Plating Option
Code
Description
006 0.4μm Selective Gold, Standard
008 0.8μm Selective Gold, Special Order
Right Angle 2.5mm Pitch Battery
INTERCONNECT
9155-500
2 WAY RIGHT ANGLE BATTERY CONNECTOR
DEFLECTIVE CONNECTOR
UNDEFLECTED CONTACT
SUGGESTED PCB LAYOUT
NOTES:
1. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
2. FOR FULL PRODUCT SPECIFICATION REFER
TO ELCO SPEC 201-01-114.
3. FOR MATING PAD DETAILS REFER TO PAGE 36.
4. PACKING DETAILS ON PAGE 35.
5. INSULATOR MATERIAL: 30% GLASS FILLED
NYLON 46, UL94 V-O. COLOR BLACK.
6. CONTACT MATERIAL: BERYLLIUM COPPER.
7. CONTACT PLATING: SELECTIVE GOLD OVER
NICKEL, PURE TIN ON TAILS.
8. BRACKET MATERIAL: PHOSPHOR BRONZE.
9. BRACKET PLATING: PURE TIN OVER NICKEL.
10. NOMINAL CONTACT FORCE 140 GRAMS AT
1.50 DEFLECTION.
11. CONPLANARITY OF ALL CONTACT TAILS AND
PADS 0.10MM MAXIMUM.
FEBRUARY 2015
■ 31
Right Angle 2.5mm Pitch Battery
INTERCONNECT
9155-500
3 WAY RIGHT ANGLE BATTERY CONNECTOR
DEFLECTIVE CONNECTOR
UNDEFLECTED CONTACT
SUGGESTED PCB LAYOUT
NOTES:
1. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
2. FOR FULL PRODUCT SPECIFICATION REFER
TO ELCO SPEC 201-01-114.
3. FOR MATING PAD DETAILS REFER TO PAGE 36.
4. PACKING DETAILS ON PAGE 35.
5. INSULATOR MATERIAL: 30% GLASS FILLED
NYLON 46, UL94 V-O. COLOR BLACK.
6. CONTACT MATERIAL: BERYLLIUM COPPER.
7. CONTACT PLATING: SELECTIVE GOLD OVER
NICKEL, PURE TIN ON TAILS.
8. BRACKET MATERIAL: PHOSPHOR BRONZE.
9. BRACKET PLATING: PURE TIN OVER NICKEL.
10. NOMINAL CONTACT FORCE 140 GRAMS AT
1.50 DEFLECTION.
11. CONPLANARITY OF ALL CONTACT TAILS AND
PADS 0.10MM MAXIMUM.
32 ■ FEBRUARY 2015
Right Angle 2.5mm Pitch Battery
INTERCONNECT
9155-500
4 WAY RIGHT ANGLE BATTERY CONNECTOR
DEFLECTIVE CONNECTOR
UNDEFLECTED CONTACT
SUGGESTED PCB LAYOUT
NOTES:
1. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
2. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-114.
3. FOR MATING PAD DETAILS REFER TO PAGE 36.
4. PACKING DETAILS ON PAGE 35.
5. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR BLACK.
6. CONTACT MATERIAL: BERYLLIUM COPPER.
7. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL, PURE TIN ON TAILS.
8. BRACKET MATERIAL: PHOSPHOR BRONZE.
9. BRACKET PLATING: PURE TIN OVER NICKEL.
10. NOMINAL CONTACT FORCE 140 GRAMS AT 1.50 DEFLECTION.
11. CONPLANARITY OF ALL CONTACT TAILS AND PADS 0.10MM MAXIMUM.
FEBRUARY 2015
■ 33
Right Angle 2.5mm Pitch Battery
INTERCONNECT
9155-500
5 WAY RIGHT ANGLE BATTERY CONNECTOR
DEFLECTIVE CONNECTOR
UNDEFLECTED CONTACT
SUGGESTED PCB LAYOUT
NOTES:
1. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
2. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-114.
3. FOR MATING PAD DETAILS REFER TO PAGE 36.
4. PACKING DETAILS ON PAGE 35.
5. INSULATOR MATERIAL: 30% GLASS FILLED NYLON 46, UL94 V-O. COLOR
BLACK.
6. CONTACT MATERIAL: BERYLLIUM COPPER.
7. CONTACT PLATING: SELECTIVE GOLD OVER NICKEL, PURE TIN ON TAILS.
8. BRACKET MATERIAL: PHOSPHOR BRONZE.
9. BRACKET PLATING: PURE TIN OVER NICKEL.
10. NOMINAL CONTACT FORCE 140 GRAMS AT 1.50 DEFLECTION.
11. CONPLANARITY OF ALL CONTACT TAILS AND PADS 0.10MM MAXIMUM.
34 ■ FEBRUARY 2015
Right Angle 2.5mm Pitch Battery
INTERCONNECT
9155-500
PACKING DETAILS
2 WAY
REEL QTY
TAPE WIDTH
POCKET PITCH
1000
25MM
12MM
3 WAY
REEL QTY
TAPE WIDTH
POCKET PITCH
1000
25MM
12MM
4 WAY
REEL QTY
TAPE WIDTH
POCKET PITCH
1000
25MM
12MM
5 WAY
REEL QTY
TAPE WIDTH
POCKET PITCH
1000
25MM
12MM
NOTES:
1. PARTS TO BE PACKED ON 330MM REELS.
2. COMPONENT ORIENTATION AS SHOWN.
FEBRUARY 2015
■ 35
Right Angle 2.5mm Pitch Battery
9155-500
INTERCONNECT
STANDARD RIGHT ANGLE – MATING PADS
2 WAY MATING PADS
3 WAY MATING PADS
4 WAY MATING PADS
5 WAY MATING PADS
NOTES:
1. SUGGESTED MATING PADS FOR RIGHT ANGLE BATTERY CONNECTORS.
2. TOP SURFACE OF HORIZONTAL PCB/BASE OF CONNECTOR.
3. OUTLINE OF CONNECTOR.
4. PREFERED PLATING ON PADS GOLD OVER NICKEL.
36 ■ FEBRUARY 2015
Single Compression Contact
INTERCONNECT
70-9155
Designers for ruggedized connectors to meet harsh environments continue to look
for new products which will reduce size and cost without jeopardizing performance.
The new Ultra-Low Profile (ULP) compression contact from AVX surface mounts to
a PCB and provides a reliable compression connection to the mating board, even
under extreme shock and vibration applications. With over 20 years of 1-Piece
compression contact experience, this innovative contact offers full connector
performance functionality at the individual contact level. Thus, allowing single
contacts to be placed in any location or position on a PCB.
The high force beryllium copper contact is gold plated to maximize reliability and
signal integrity. The current offering has two contacts with nominal heights of
1.0mm and 1.5mm. Add in the “Z” axis tolerance range and the compressed height
covers 0.75mm up to 1.75mm. The contacts are supplied in tape and reel for easy
SMT placement.
APPLICATIONS
FEATURES AND BENEFITS
• Industrial/Ruggedized handheld or portable
devices
• BTB connection for any traditional power or
signal application
• Ground connections between PCB’s or
housings
• Reliable gold plated Beryllium Copper contacts for high cycle life
and signal integrity up to 1000 cycles
• Tape and reel packaged for automated SMT placement
• Sweeping beam design for pluggable/module applications
• Three gold plating options to match end product environmental or
expected life requirements
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 3 Amps
• Voltage Rating: Based on placement distance
• Operating Temperature:
-40ºC to +125ºC
• Contact Material: Beryllium Copper
• Contact Plating: Gold over Nickel
• Durability: 50, 500 and 1000 cycles
HOW TO ORDER
70
9155
001
Prefix
Series
Number
of Ways
61X
00X
Contact Description
Nominal
Code
Operating Height
610
1.00mm
615
1.50mm
Contact Operating
Height Range
0.75mm to 1.25mm
1.25mm to 1.75mm
Contact Description
Gold
Code
Thickness
004
0.1μm
006
0.4μm
008
0.8μm
Description
Nickel under Plate, Gold on Nose
Tin on Remainder
Nickel under Plate, Gold on Nose
Tin on Remainder
Nickel under Plate, Gold on Nose
Tin on Remainder
Availability
Standard
Special
Order
Special
Order
Certification: UL File #E90723
FEBRUARY 2015
■ 37
Single Compression Contact
INTERCONNECT
70-9155
70-9155-001-610-006
NOMINAL WORKING HEIGHT 1.00MM
FULLY DEFLECTED
CONTACT
SUGGESTED MATING
PCB LAYOUT
SUGGESTED SMT
PCB LAYOUT
38 ■ FEBRUARY 2015
NOTES:
1. 9155 LOW PROFILE CONTACT, WORKING HEIGHT 0.75MM TO 1.25MM.
2. FOR FULL DETAILS REFER TO PRODUCT SPECIFICATION 201-01-153 AND
APPLICATIONS NOTES 201-01-154.
3. MATERIAL: COPPER ALLOY 0.2MM THICK.
4. PLATING: NICKEL ALL OVER WITH GOLD ON CONTACT NOSE AND TIN ON THE
REMAINDER. PARTS TO BE PACKED IN TAPE AND REEL. QTY PER REEL 3000.
5. OUTLINE OF CONNECTOR, ORIENTATION END “A”.
6. AREA TO KEPT FREE OF SOLDER RESIST, FURTHER INFORMATION IN
APPLICATION NOTES.
7. AREA BETWEEN PADS TO BE KEPT CLEAR OF TRACKS AND COMPONENTS.
8. SMT PADS PLATED TIN.
9. MATING PAD PLATED GOLD OVER NICKEL.
PACKING DETAILS
Single Compression Contact
INTERCONNECT
70-9155
70-9155-001-610-006
NOMINAL WORKING HEIGHT 1.50MM
FULLY DEFLECTED
CONTACT
SUGGESTED MATING
PCB LAYOUT
SUGGESTED SMT
PCB LAYOUT
NOTES:
1. 9155 LOW PROFILE CONTACT, WORKING HEIGHT 0.75MM TO 1.25MM.
2. FOR FULL DETAILS REFER TO PRODUCT SPECIFICATION 201-01-153 AND
APPLICATIONS NOTES 201-01-154.
3. MATERIAL: COPPER ALLOY 0.2MM THICK.
4. PLATING: NICKEL ALL OVER WITH GOLD ON CONTACT NOSE AND TIN ON THE
REMAINDER. PARTS TO BE PACKED IN TAPE AND REEL. QTY PER REEL 3000.
5. OUTLINE OF CONNECTOR, ORIENTATION END “A”.
6. AREA TO KEPT FREE OF SOLDER RESIST, FURTHER INFORMATION IN
APPLICATION NOTES.
7. AREA BETWEEN PADS TO BE KEPT CLEAR OF TRACKS AND COMPONENTS.
8. SMT PADS PLATED TIN.
9. MATING PAD PLATED GOLD OVER NICKEL.
PACKING DETAILS
FEBRUARY 2015
■ 39
Standard I/O, 15 Position
INTERCONNECT
XX-9157
The 9157 series was specifically designed for portable equipment.
AVX now offers this two-part system as a standard product. The fixed SMT socket is
designed to be housed within the confined dimensional constraints of the portable device.
The plug/cover connector has sprung contacts and is designed for termination to accessory equipment. The connector is designed to house fifteen signal contacts on a 1mm pitch
rated at 1.5A. There is the option to include a switching RF coax.
A cradle SMT plug connector for docking applications is also available asstandard and has
the option of including a SMT RF coax.
Whatever your requirements, the 9157 series can also be customized to suit your application.
APPLICATIONS
•
•
•
•
FEATURES AND BENEFITS
•
•
•
•
Patented 20º angled face on the socket gives self-cleaning face when mated with plug.
Metal Latching area integral to socket which saves PCB real estate.
Integral to socket is a mechanical 50Ω switching coax for SMT termination.
Single sprung plug contact design gives ten thousand mating cycles and cleaning/wiping action.
• Customer has option to terminate own RF coax using AVX custom tooling:
06-9157-7116-01-000.
• SMT plug has unique location pyramids that give positive alignment to portable device,
and assist blind mating.
• RoHS Compliant.
Mobile Phones
PDA
Medical
Docking/Charging for
any portable device
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 1.5 Amps / Contact
• Voltage Rating: 125 VAC
• Operating Temperature:
-55ºC to +125ºC
• Insulator Material: Glass-Filled Nylon 46;
UL94 V-O
• Contact Material: Beryllium Copper (plug)
Phosphor Bronze (socket)
• Plating: Gold over Nickel
• Durability: 10,000 Cycles
HOW TO ORDER
Plug Options – Example
XX
9157 015
PACKING DETAILS
00X
00X
Series No of
RF Coax Option
Prefix
Ways 000 = No RF Coax
10 = Plug
15 = 015 001 = With RF Coax
58 = Special
Socket Options – Example
Type Size Description
Wire 580
Tube
SMT 300 Tape & Reel
Contact Type
Code Type Contact Plating
006 Wire Nickel, Gold Nose,
Pure Tin Tail
007 SMT Nickel, Gold Nose,
Pure Tin Tail
20
9157 015
00X
006
Series No of
RF Coax Option
Contact
Prefix
Type
20 = Socket
Ways 000 = No RF Coax
58 = Special
15 = 015 001 = With RF Coax 006 = SMT
Cover Options – Example
30
9157
9700
00
Prefix
Series
Cover Kit
Press and Screw
Assembly
Standard
Code
9700
Description
Cover Side
Cover Body
Latch Button
Metal Latch
Fixing Screw
40 ■ FEBRUARY 2015
Qty
1
1
2
2
2
0XX
Grommet Variation
Code
000
035
050
Description
Qty
No Grommet
NA
3.5mm Grommet 1
5.0mm Grommet 1
PACKING DETAILS
Kit to be ordered in
multiples of 580
Item
Cover Side
Cover Body
Latch Button
Metal Latch
Grommet
Fixing Screw
Packing
Parts packed
in bags of
580
580
Pack Parts
1160
in Bags
58
1160
Qty as
580
Column 3
1160
When Required
Patent:
2276285
5540599
Standard I/O, 15 Position
INTERCONNECT
XX-9157
9157 PLUG WIRE WITHOUT COAX
SECTION B-B
PACKING DETAIL
NOTES:
1. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
2. PACKED IN TUBES, 20 PIECES PER TUBE.
3. MINIMUM ORDER QUANTITY 580 PIECES, THEREAFTER TO BE SUPPLIED IN MULTIPLES OF 580.
4. FOR FULL PRODUCT INFORMATION REFER TO ELCO SPECIFICATION 201-01-079.
FEBRUARY 2015
■ 41
Standard I/O, 15 Position
INTERCONNECT
XX-9157
9157 PLUG SMT WITHOUT COAX
SECTION B-B
PACKING DETAIL
NOTES:
1. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
2. PACKED IN TAPE AND REEL, 300 PIECES PER REEL.
3. FOR FULL PRODUCT INFORMATION REFER TO ELCO SPECIFICATION 201-01-079.
42 ■ FEBRUARY 2015
Standard I/O, 15 Position
INTERCONNECT
XX-9157
9157 PLUG WIRE WITH COAX
SECTION B-B
CRIMPING DETAILS
PACKING DETAIL
NOTES:
1. TOOL TO CRIP BARREL ELECO PART NUMBER 06-9157-7117-01-000.
2. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
3. PACKED IN TUBES, 20 PIECES PER TUBE.
4. MINIMUM ORDER QUANTITY 580 PIECES, THEREAFTER TO BE SUPPLIED IN MULTIPLES OF 580.
5. FOR FULL PRODUCT INFORMATION REFER TO ELCO SPECIFICATION 201-01-079.
FEBRUARY 2015
■ 43
Standard I/O, 15 Position
INTERCONNECT
XX-9157
9157 PLUG SMT WITH COAX
SECTION B-B
PACKING DETAIL
PCB LAYOUT
NOTES:
1. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS UNLESS TOLERANCED.
2. PACKED IN TAPE AND REEL, 300 PIECES PER REEL.
3. FOR FULL PRODUCT INFORMATION REFER TO ELCO SPECIFICATION 201-01-079.
44 ■ FEBRUARY 2015
Standard I/O, 15 Position
INTERCONNECT
XX-9157
9157 SOCKET WITHOUT COAX
RECOMMENDED PCB LAYOUT
NOTES:
1. ALL DIMENSIONS SHOWN ARE REFERENCE
DIMENSIONS UNLESS TOLERANCED.
2. FOR FULL INFORMATION REFER TO ELCO
SPECIFICATION 201-01-079.
SECTION A-A
FEBRUARY 2015
■ 45
Standard I/O, 15 Position
INTERCONNECT
XX-9157
9157 SOCKET WITH COAX
RECOMMENDED PCB LAYOUT
NOTES:
1. ALL DIMENSIONS SHOWN ARE REFERENCE
DIMENSIONS UNLESS TOLERANCED.
2. FOR FULL INFORMATION REFER TO ELCO
SPECIFICATION 201-01-079.
SECTION A-A
46 ■ FEBRUARY 2015
Standard I/O, 15 Position
INTERCONNECT
XX-9157
30-9157-9700-00-XXX
PRESS AND SCREW VERSION
COVER KIT SHOWN FULL ASSEMBLED
WITH PLUG ASSEMBLY 10-91557-015-XXX-001
NOTES:
3FOR FULL PRODUCT INFORMATION REFER TO
ELCO SPECIFICATION 201-01-079.
FEBRUARY 2015
■ 47
Standard I/O, 19 Position
INTERCONNECT
XX-9157
Based on our standard 15 way 9157 I/O family, AVX has now released a
family 19 way devices. This range includes a SMT 90 degree plug, a wire
socket version that is used with the standard 9157 cover and a SMT socket
for charging applications.
Options with the 90 degree SMT socket include the sealing of the connector contacts and the connector to the housing. There is also an option to
have an EMLB (early mate, late break) on pins 1 and 19.
To achieve the seal to the device housing, it may be necessary to customize
the device housing design.
On the SMT 90 degree version, we also have the capability of an integrated
DC jack, enabling both the DC jack and the 19 way cover to be plugged in
at the same time.
APPLICATIONS
•
•
•
•
Mobile Phones
PDA
Medical
Docking/Charging for
any portable device
FEATURES AND BENEFITS
•
•
•
•
Patented 20º angled face on the socket gives self-cleaning face when mated with plug.
Metal Latching area integral to socket which saves PCB real estate.
Integral to socket is a mechanical 50Ω switching coax for SMT termination.
Single sprung plug contact design gives ten thousand mating cycles and cleaning/wiping action.
• Customer has option to terminate own RF coax using AVX custom tooling:
06-9157-7116-01-000.
• SMT plug has unique location pyramids that give positive alignment to portable device,
and assist blind mating.
• RoHS Compliant.
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 1.5 Amps / Contact
• Voltage Rating: 125 VAC
• Operating Temperature:
-55ºC to +125ºC
• Insulator Material: Glass-Filled Nylon 46;
UL94 V-O
• Contact Material: Beryllium Copper (plug)
Phosphor Bronze (Socket)
• Plating: Gold over Nickel
• Durability: 10,000 Cycles
AVAILABLE DEVICES:
10 9157 019 000 006
10 9157 019 000 007
20 9157 019 000 006
30 9157 97 XX 00 000
48 ■ FEBRUARY 2015
Plug wire version
SMT charging version
90 degree SMT socket
Cover options
Standard I/O, 19 Position
INTERCONNECT
XX-9157
Plug Wire
SMT Plug
28.80 (1.134)
25.80 (1.016)
1.50 ±0.10
(0.059 ±0.004)
28.80 ±0.10
(1.134 ± 0.004)
18.00 (0.709)
1.00
(0.039)
X
3.00 (0.118)
8.16 ±0.10
(0.321 ±0.004)
SMT CAP TO BE FITTED
CENTRALLY ON CONNECTOR
4.20 ±0.10
(0.165 ±0.004)
X
SMT Socket
SMT Plug
(Suggested PCB Layout)
31.50 (1.240)
28.50 (1.122)
26.60 (1.047)
22.00 (0.866)
5.75
(0.226)
22.80 (0.898)
2.90
(0.114)
17.00 (0.669)
19 PADS @ 0.60 x 2.40
(19 PADS @ (0.024 x 0.094)
A
1.50 (0.059)
2.40
(0.094)
8.00
5.50 (0.315)
(0.217)
1.50 (0.059)
R1.20 TYP
(R0.047 TYP)
A
2 THRU HOLES
Ø 1.60 (0.063)
Pin 1 and Pin 19 are early mate
late break contacts.
2.40 (0.094)
5.00 (0.197)
2 SMT PADS
Ø 5.40 (0.213) O/D
18 PITCHES
@ 1.00 = 18.00
(0.039 = 0.709)
SUGGESTED PCB LAYOUT
18 PITCHES @ 1.00 = 18.00
18 PITCHES @ (0.039 = 0.709)
SMT Socket
(Suggested PCB Layout)
26.60 (1.047)
18 PITCHES @ 1.00 = 18.00
18 PITCHES @ (0.039 = 0.709)
2 PADS 0.80 x 0.80
(0.031 x 0.031)
3.50
(0.138)
4.30 (0.169)
2 HOLES
Ø 1.00 (0.039)
19 PADS 0.50 x 1.35
(0.020 x 0.053)
R1.20
(R0.047)
SUGGESTED PCB LAYOUT
16.80 MAX
(0.661 MAX)
4.90
(0.193)
1.80
(0.071)
0.71
(0.028)
0.31
(0.012)
FEBRUARY 2015
■ 49
Standard I/O, 19 Position
XX-9157
INTERCONNECT
Cover Kit
32.20 (1.268) REF
35.05
(1.380)
REF
28.58
(1.125)
REF
PLUG 10-9157-019-XXX-006
50 ■ FEBRUARY 2015
7.30
(0.287)
REF
Reduced Size I/O, 16 Position
INTERCONNECT
XX-9257
An I/O interconnect system designed for portable equipment.
AVX offers this plug and socket reduced size system as a standard product. The
fixed SMT socket is designed to be mounted on a PCB and housed within a
portable device. The plug is designed for cable termination with options of single
and double sided contacts and customizing the overmold cover or parts can be
supplied as connector only for sub contract termination. The socket connector
houses 16 contacts in two rows on 1.25mm pitch with a rating of 1 amp per contact. Both connectors are RoHS compliant.
APPLICATIONS
•
•
•
•
FEATURES AND BENEFITS
•
•
•
•
•
•
•
Cellular Phones
Handheld Devices
Industrial Modules
Medical Electronics
No latching is required due to the click design of the contacts.
Optional customization of the overmold cover.
Options of single row (8 way) or dual row (16 way) plug connector.
Compact size to optimize PCB real estate.
Metal outer cover provides integrated PCB location and solder tab.
Positive alignment and orientation of the plug and socket.
5K mating cycles and 1 amp rated.
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 1 Amp / Contact
• Voltage Rating: 125 VAC
• Operating Temperature:
-55ºC to +85ºC
I•
•
•
•
nsulator Material: Nylon 46; UL94 V-O
Contact Material: Beryllium Copper
Plating: Gold over Nickel
Durability: 5,000 Cycles
HOW TO ORDER
Plug Options – Example
10
9257
Prefix
10 = Plug
Series
0XX
001
003
PACKING
Parts packed in tubes
50 per tube
No of Ways
008 = 8 Way – One side of the moulding
loaded with contacts
016 = 16 Way – Both sides of the moulding
loaded with contacts
Contact
001 = Solder Bucket
Plating Option
003 = 0.8μm Selective Gold,
Pure Tin Tail
Socket Options – Example
20
9257
016
001
01
Prefix
20 = Socket
Series
No of Ways
016 = 16
Contact
001 = SMT Termination
Solder Bracket
01 = Solder Bracket
with Location Pegs
3
Plating Option
3 = 0.8μm Selective Gold,
Tin Tail
FEBRUARY 2015
■ 51
Reduced Size I/O, 16 Position
INTERCONNECT
XX-9257
SINGLE SIDED 8 WAY I/O PLUG CONNECTOR
SECTION Z-Z
50 PARTS PER TUBE
NOTES:
1. ALL DIMENSIONS ARE FOR REFERENCE ONLY UNLESS TOLERANCED.
2. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-089.
3. POSITIONS 2, 4, 6 ... 16 USED, POSITION 1, 3, 5 ... UNUSED.
52 ■ FEBRUARY 2015
Reduced Size I/O, 16 Position
XX-9257
INTERCONNECT
DOUBLE SIDED 16 WAY I/0 PLUG CONNECTOR
SECTION Z-Z
50 PARTS PER TUBE
NOTES:
1. ALL DIMENSIONS ARE FOR REFERENCE ONLY UNLESS TOLERANCED.
2. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-089.
3. POSITIONS 2, 4, 6 ... 16 USED, POSITION 1, 3, 5 ... UNUSED.
FEBRUARY 2015
■ 53
Reduced Size I/O, 16 Position
XX-9257
INTERCONNECT
SUGGESTED OVERMOULDING FOR PLUG CONNECTOR
(16 WAY – STANDARD STYLE)
NOTES:
1. STANDARD STRAIN RELIEF MOULDING.
2. DIMENSION MARKED WITH A * ARE VARIABLE DIMENSION
T0 SUIT CUSTOMER DESIGN AND APPLICATION.
3. TYPICALLY FOR CABLE OUTER JACKET DIAMETERS
ABOVE 4.50MM.
54 ■ FEBRUARY 2015
Reduced Size I/O, 16 Position
XX-9257
INTERCONNECT
SUGGESTED OVERMOULDING FOR PLUG CONNECTOR
(16 WAY – SLIM STYLE)
NOTES:
1. STANDARD STRAIN RELIEF MOULDING.
2. DIMENSION MARKED WITH A * ARE VARIABLE DIMENSION
T0 SUIT CUSTOMER DESIGN AND APPLICATION.
3. TYPICALLY FOR CABLE OUTER JACKET DIAMETERS
ABOVE 4.50MM.
FEBRUARY 2015
■ 55
Reduced Size I/O, 16 Position
INTERCONNECT
XX-9257
16 WAY SOCKET CONNECTOR
TOP VIEW
REAR VIEW
SECTION Z-Z
END VIEW
FRONT VIEW
PACKING DETAILS
REEL QTY
LEADER
TRAILER
REELS/BOX
PACK QTY
UNDERSIDE VIEW
PCB LAYOUT
NOTES:
1. PROPOSAL FOR 16 WAY I/O SOCKET.
2. FOR FULL PRODUCT SPECIFICATION REFER TO ELECO SPEC 201-01-089.
3. GENERAL TOLERANCE ±0.20MM UNLESS OTHERWISE STATED.
4. SMT FEET WITHIN ±0.10MM COPLINARITY.
56 ■ FEBRUARY 2015
1100
33 PKTS
33 PKTS
5
5500
Mini I/O, 12 Position
INTERCONNECT
XX-9257
AVX offers the 12 way mini I/O connector as a standard product. The fixed SMT
socket is designed to be mounted on a PCB and housed within a portable device.
The plug is designed for cable termination with options of single and double sided
contacts. Parts can be supplied as connectors only for sub contract termination,
or with a custom overmold cover. The socket connector houses 12 contacts in a
single row on 0.50mm pitch.
APPLICATIONS
•
•
•
•
FEATURES AND BENEFITS
•
•
•
•
•
Medical Electronics
Cellular Phones
Industrial Modules
Hand Held Devices
No latching required due to the click design of the contacts.
Optional customization of the overmold cover.
Compact size to optimize PCB real estate.
Metal outer cover provides integrated PCB location and solder tab.
Positive alignment and orientation of the plug and socket.
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 0.5 Amp / Contact
• Voltage Rating: 50 VAC
• Operating Temperature:
-55ºC to +85ºC
• Insulator Material: High Temperature Plastic;
UL94 V-O
• Contact Material: Phosphor Bronze (Plug)
Copper Alloy (Socket)
• Plating: Gold over Nickel
• Durability: 5,000 Cycles
HOW TO ORDER
Plug Options
10
9257
012
101
006
Prefix
10 = Plug
Series
No of Ways
012 = 12 Way
Contact
001 = Solder Tail
Contact Plating Option
006 = 0.25μm Gold over Nickel
Socket Options
20
9257
012
101
01
6
Prefix
20 = Socket
Series
No of Ways
012 = 12 Way
Contact
101 = SMT Termination
Solder Bracket
01 = Solder Bracket
with Location Pegs
Plating Option
3 = 0.25μm Gold over Nickel
Certification: UL File #E90723
FEBRUARY 2015
■ 57
Mini I/O, 12 Position
INTERCONNECT
XX-9257
9257 STANDARD 12 WAY MINI I/0 PLUG
NOTES:
1. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS
UNLESS TOLERANCED.
2. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO
SPECIFICATION 201-01-116.
3. MATERIALS: INSULATOR: HIGH TEMP PLASTIC, UL94 V-O,
COLOR BLACK.
CONTACT: COPPER ALLOY. SHELL: STAINLESS STEEL.
4. PLATING: CONTACT: GOLD OVER NICKEL. SHELL: GOLD
OVER NICKEL.
5. PACKED IN TUBES, 60 PIECES PER TUBE.
PACKING DETAILS
60 PARTS PER TUBE
58 ■ FEBRUARY 2015
Mini I/O, 12 Position
XX-9257
INTERCONNECT
SUGGESTED OVERMOULDING FOR PLUG CONNECTOR
NOTES:
DIMENSIONS MARKED WITH A * ARE VARIABLE DIMENSIONS
TO SUIT CUSTOMER DESIGN AND APPLICATION
FEBRUARY 2015
■ 59
Mini I/O, 12 Position
INTERCONNECT
XX-9257
9257 STANDARD 12 WAY MINI I/O SOCKET
PACKING DETAILS
NOTES:
1. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS UNLESS TOLERANCED.
2. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-116.
3. MATERIALS: INSULATOR: HIGH TEMP PLASTIC, UL94 V-O, COLOR BLACK.
CONTACT: COPPER ALLOY. SHELL: STAINLESS STEEL.
4. PLATING: CONTACT: GOLD OVER NICKEL. SHELL: GOLD OVER NICKEL.
5. PACKED IN TAPE AND REEL, 1200 PIECES PER REEL.
60 ■ FEBRUARY 2015
SIM Block
INTERCONNECT
9162-000
The standard SIM connector is specifically designed for handheld devices requiring secure subscriber identification.
The connectors are available in a standard 6 pin configuration on a 2.54mm pitch
with a 0.8mm height.
Contacts are stamped, gold plated, rated at 0.5A, and 5000 mechanical cycles.
Our contact design is specifically rounded to avoid any possible damage during
and after card insertion to the card itself, assuming normal use. The
design also incorporates protection features to avoid contact damage during this
operation such as contact snagging.
Please contact the appropriate sales office for further details.
APPLICATIONS
FEATURES AND BENEFITS
• Produced for use with both full ISO cards and mini SIM cards.
• The insulator is molded from high temperature plastic enabling the
connector to be used in convection or infrared soldering processes.
• Supplied on tape and reel packaging for pick and place assembly.
• RoHS Compliant.
• Cellular Phones
• Radios
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 0.5 Amp / Contact
• Voltage Rating: 50 VAC
• Operating Temperature:
-55ºC to +80ºC
•
•
•
•
Insulator Material: Glass Filled LCP
Contact Material: Beryllium Copper
Plating: Gold over Nickel
Durability: 5,000 Cycles
HOW TO ORDER
00
9162
006
006
080
Prefix
Series
Number of
Contacts
SIM Type
006 = SMT Low Profile
SIM Pure Tin Contact
Connector Height
080 = 0.80mm
FEBRUARY 2015
■ 61
SIM Block
INTERCONNECT
9162-000
CONNECTOR HEIGHT 0.80MM
PCB PAD LAYOUT
PACKING DETAILS
REEL QTY
LEADER
TRAILER
REELS/BOX
PACK QTY
NOTES:
1. SALES DRAWING FOR SLIDE IN SIM READER.
2. FOR PRODUCT SPECIFICATION REFER TO ELCO SPEC. 201-01-084.
3. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
4. INSULATOR MATERIAL: LCP, GLASS FILLED, COLOR BLACK.
5. CONTACT MATERIAL COPPER ALLOY: SIM CONTACTS NOSE PLATED WITH GOLD,
SMT PADS PLATED WITH PURE TIN.
62 ■ FEBRUARY 2015
1300
500MM
500MM
5
6500
(SHOWING USER DIRECTION OF FEED)
Slide-In SIM
INTERCONNECT
9162-200
The standard SIM connector is specifically designed for handheld devices requiring secure subscriber identification.
Following on from the introduction of our standard SIM block with an offering of 3
standard heights, 0.80mm, 1.60mm, or 2.40mm, AVX is now adding
another standard to the 9162 series SIM connectors, the slide-in SIM.
Unlike SIM blocks which require SIM card guides to aid insertion, removal and
retention of the SIM card, the slide-in SIM has guides as part of the connector
mold design.
Contacts are stamped, gold plated, rated 0.5A, and 5000 mechanical cycles.
Our contact design is specifically rounded to avoid any possible damage during
and after card insertion to the card itself, assuming normal use. The design also
incorporates protection features to avoid contact damage during this operation
such as contact snagging.
Please contact the appropriate sales office for further details of this service.
APPLICATIONS
FEATURES AND BENEFITS
• Produced for use with mini SIM cards.
• The insulator is molded from high temperature plastic enabling the
connector to be used in convection or infrared soldering processes.
• Supplied on tape and reel packaging for pick and place assembly.
• The all plastic design, assuming normal use prevents damage to the
SIM card on insertion.
• Optional SMT contact size:
Standard SMT contact size – 1.60mm x 1.60mm
Narrow SMT contact size – 1.05mm x 0.60mm
• RoHS Compliant available.
• Cellular Phones
• Radios
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 0.5 Amp / Contact
• Voltage Rating: 50 VAC
• Operating Temperature:
-55ºC to +105ºC
•
•
•
•
Insulator Material: Nylon 46 UL94HB
Contact Material: Phosphor Bronze
Plating: Gold over Nickel
Durability: 5,000 Cycles
HOW TO ORDER
00
9162
006
2X
6
175
Prefix
Series
Number of
Contacts
SIM Type
20 = Standard SMT Foot
Slide-in SIM Reader
21 = Narrow SMT Foot
Slide-in SIM Reader
Plating Option
6 = Selective Gold
Pure Tin Tails
Connector Height
175 = 1.750mm
See pages 64 & 65
FEBRUARY 2015
■ 63
Slide-In SIM
INTERCONNECT
9162-200
WIDE SMT FOOT VERSION
SECTION Y-Y
SECTION Z-Z
SECTION T-T
DETAIL A
PART SECTION Z-Z
ROTATED THRO 90º
CONTACT FUNCTIONS (ISO78161):
1. SSUPPLY VOLTAGE Vcc.
2. RESET
3. CLOCK
4. GROUND
5. PROGRAM VOLTAGE Vpp.
6. I/0
PAD LAYOUT
NOTES:
1. SALES DRAWING FOR SLIDE IN SIM READER.
2. FOR PRODUCT SPECIFICATION REFER TO
ELCO SPEC. 201-01-085.
3. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
4. INSULATOR MATERIAL:NYLON GLASS FILLED.
5. CONTACT MATERIAL COPPER ALLOY:
SIM CONTACTS NOSE PLATED WITH GOLD,
SMT PADS PLATED WITH PURE TIN.
6. PACKING DETAILS SEE PAGE 66.
64 ■ FEBRUARY 2015
Slide-In SIM
INTERCONNECT
9162-200
NARROW SMT FOOT VERSION
SECTION Y-Y
SECTION Z-Z
SECTION T-T
DETAIL A
PART SECTION Z-Z
ROTATED THRO 90º
CONTACT FUNCTIONS (ISO78161):
1. SSUPPLY VOLTAGE Vcc.
2. RESET
3. CLOCK
4. GROUND
5. PROGRAM VOLTAGE Vpp.
6. I/0
PAD LAYOUT
NOTES:
1. SALES DRAWING FOR SLIDE IN SIM READER.
2. FOR PRODUCT SPECIFICATION REFER TO
ELCO SPEC. 201-01-085.
3. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED.
4. INSULATOR MATERIAL:NYLON GLASS FILLED.
5. CONTACT MATERIAL COPPER ALLOY:
SIM CONTACTS NOSE PLATED WITH GOLD,
SMT PADS PLATED WITH PURE TIN.
6. PACKING DETAILS SEE PAGE 66.
FEBRUARY 2015
■ 65
Slide-In SIM
INTERCONNECT
9162-200
PACKING DETAILS
Reel Size 380mm Dia.
REEL QTY
LEADER
TRAILER
REELS/BOX
PACK QTY
(SHOWING USER DIRECTION OF FEED)
66 ■ FEBRUARY 2015
1100
500MM
500MM
4
4400
Locking SIM
INTERCONNECT
9162-300
For 9162 Slide-IN & 9162 SIM/microSD
• Accepts GSM Standard 11.11 cards
• Secure locking latch mechanism
• Robust, good resistance against shock and vibration
• SIM Installed Height – 1.50mm
• Polarized to eliminate improper insertion of the card
APPLICATIONS
FEATURES AND BENEFITS
•
•
•
•
• Cellular Phones
• Radios
SMT with locking hinged guide
2.50mm connector height
Selective gold on mating surface/tin on solder tails
Tape and reel packaging
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 0.3 Amp / Contact
• Voltage Rating: 30 VAC
• Operating Temperature:
-55ºC to +125ºC
• Insulator Material: High Temperature Plastic;
UL94 V-O
• Contact Material: Copper Alloy
• Plating: Gold over Nickel
• Durability: 10,000 Cycles
HOW TO ORDER
00
9162
006
30
1
150
Prefix
Series
Number of
Contacts
SIM Type
30 = SMT with Locking
Hinge SIM Guide
Contact Plating
1 = Selective Gold on Contact
Surface and Tin on Solder Tails
SIM Height
150 = 1.50mm on SIM Card
2.50mm on Connector
FEBRUARY 2015
■ 67
Locking SIM
INTERCONNECT
9162-300
CONNECTOR DETAILS
SUGGESTED PCB LAYOUT
NOTES:
1. SALES DRAWING FOR SIMLOCK SIM READER.
2. ALL DIMENSIONS ARE REFERENCE DIMENSIONS UNLESS
TOLERANCED.
3. FOR PRODUCT SPECIFICATION REFER TO
ELCO SPEC. 201-01-111.
4. PACKING IN TAPE AND REEL, 600 PIECES IN A 330MM REEL.
5. MATERIAL: COVER AND HOUSING: HIGH TEMPERATURE
THERMOPLASTIC UL94 V-O, COLOR BLACK. CONTACT:
COPPER ALLOY, GOLD PLATING IN CONTACT AREA, TIN
PLATING ON SOLDER TAILS, NICKEL UNDERCOAT ON ALL
SURFACES.
PACKING DETAILS
CONTACT FUNCTIONS (ISO78161):
1. SSUPPLY VOLTAGE Vcc.
2. RESET
3. CLOCK
4. GROUND
5. PROGRAM VOLTAGE Vpp.
6. I/0
68 ■ FEBRUARY 2015
Slide-In Low Profile SIM
INTERCONNECT
9162-400
•
•
•
•
Six position Slide-In SIM
Low Profile – 0.70mm to SIM base
Side bracket to add solder security
SIM guidance using the side walls
APPLICATIONS
FEATURES AND BENEFITS
•
•
•
•
•
• Cellular Phones
• Radios
SMT Slide-In SIM
Molded in high temperature LCP
0.38μm Gold on contact surface and gold flash on contact tails
1.60mm connector height
Tape & Reel packaging
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 0.3 Amp / Contact
• Voltage Rating: 15 VAC
• Operating Temperature:
-55ºC to +70ºC
• Insulator Material: High Temperature Plastic;
UL94 V-O
• Contact Material: Copper Alloy
• Plating: Gold over Nickel
• Durability: 10,000 Cycles
HOW TO ORDER
00
9162
006
Prefix
Series
Number of
Contacts
40
SIM Type
40 = SMT Slide-in SIM
1
070
Contact Plating
1 = 0.38μm Gold on Contact Surface
and Gold Flash on Solder Tails.
Underplated 1.27μm Nickel.
SIM Height
070 = 0.70mm on SIM Card
1.60mm on Connector
FEBRUARY 2015
■ 69
Slide-In Low Profile SIM
INTERCONNECT
9162-400
CONNECTOR DETAILS
NOTES:
1. DIMENSIONS SHOWN ARE REFERENCED DIMENSIONS.
2. INSULATOR MATERIAL: LCP, UL94 V-O, COLOR BLACK.
3. CONTACT MATERIAL: PHOSPHOR BONZE.
4. CONTACT PLATING: NICKEL ALL OVER, GOLD ON CONTACT, GOLD FLASH ON TAILS.
5. PADS: NICKEL PLATED STAINLESS STEEL, PURE TIN PLATING.
6. COPLINARITY OF PADS 0.10 MAXIMUM.
7. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-112.
SUGGESTED PCB LAYOUT
CONTACT FUNCTIONS (ISO78161):
1. SSUPPLY VOLTAGE Vcc.
2. RESET
3. CLOCK
4. GROUND
5. PROGRAM VOLTAGE Vpp.
6. I/0
70 ■ FEBRUARY 2015
Slide-In Low Profile SIM
9162-400
INTERCONNECT
PACKING DETAILS
NOTES:
1. TO BE PACKED IN TAPE AND REEL.
2. 1000 PIECES ON A 330MM REEL.
3. COMPONENT DIRECTION AS SHOWN.
FEBRUARY 2015
■ 71
SIM/Micro SD Combination
INTERCONNECT
9162-500
• Six position slide-in SIM connector & Push-Push microSD connector
• Allows two cards to be inserted into the same connector
• Card detect switch on the microSD
APPLICATIONS
FEATURES AND BENEFITS
• Cellular Phones
• Radios
•
•
•
•
•
•
Space saving connector combination
Integrates 2 connectors into 1
Contact Plating: Gold
Insulator molded from LCP UL94 V-O
Low profile 1.50mm to SIM
2.70mm connector height
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 0.3 Amp / Contact
• Voltage Rating: 15 VAC
• Operating Temperature:
-55°C to +70°C
•
•
•
•
Insulator Material: LCP; UL94 V-O
Contact Material: Beryllium Copper
Plating: Gold over Nickel
Durability: SIM @10,000 Cycles / SD @ 6000 Cycles
HOW TO ORDER
00
9162
006
Prefix
Series
Number of
Contacts
72 ■ FEBRUARY 2015
50
SIM Type
50 = SMT with SIM
and Micro SD
Slots at 90º
1
150
Contact Plating
1 = Gold Plating over Nickel
SIM Height
150 = 1.50mm on SIM Card
2.70mm on Connector
SIM/Micro SD Combination
INTERCONNECT
9162-500
CONNECTOR DETAILS
NOTES:
1. CONNECTOR CONTAINS SLOTS AT RIGHT ANGLES FOR A SIM
CARD AND MICRO SD CARD SEE PAGE 73 FOR FURTHER
DETAILS.
2. 6 WAY SIM CONNECTOR.
3. MICRO SD CONNECTOR HAS SWITCH AND LATCH.
4. DIMENSION SHOWN AE REFERENCE DIMENSIONS.
5. MATERIALS: CONTACTS: GOLD PLATED BERYLLIUM COPPER,
INSULATOR: LCP, UL94 V-O, COLOR BLACK. SHELL: NICKEL
PLATED STAINLESS STEEL. OTHER PARTS: STAINLESS STEEL.
6. FURTHER DETAILS REFER TO ELCO SPEC 201-01-113.
7. DETAILS FO PIN FUNCTIONS REFER TO PAGE 73.
PCB
CONNECTOR ON PCB
FEBRUARY 2015
■ 73
SIM/Micro SD Combination
INTERCONNECT
9162-500
PCB SPACE USED BY CONNECTOR
CARDS FULLY INSERTED
CARDS EXTRACTED
SHOWN FOR REFERENCE ONLY
MICRO SD FUNCTIONS:
S. SWITCH
S. SWITCH
1. DAT2
2. CD/DAT3
3. CMD
4. Vdd
5. CLOCK
6. Vss
7. DAT0
8. DAT1
PACKING DETAILS
CONTACT FUNCTIONS (ISO78161):
1. SSUPPLY VOLTAGE Vcc.
2. RESET
3. CLOCK
4. GROUND
5. PROGRAM VOLTAGE Vpp.
6. I/0
NOTES:
1. PACKING IN TAPE AND REEL, 700 PER REEL.
2. REEL SIZE 330MM DIAMETER.
74 ■ FEBRUARY 2015
IDC SMT Coax 1 Position
INTERCONNECT
00-9178
AVX has developed a unique 50 Ohm SMT Coax Connector based on our
industry proven discrete wire Insulation Displacement Connector (IDC)
technology. By combining two different sized IDC contacts, we can
reliably pierce the center conductor and outside jacket dielectric materials
to make electrical connection to the signal wire and braid (ground
connection). Designed specifically for RG178 cable, the concept can be
applied to other cable sizes.
The connector comes with a pre-attached cap in tape & reel packaging.
The coax cable only needs the outer jacket and braid stripped. The cable
is then inserted into the connector and the cap can be pressed down via
a small press or hand tool. The biggest advantage of this connector is that
it is extremely easy to terminate, no soldering, additional stripping
processes or crimp tools are needed. The all plastic design is more cost
effective than plated screw machine components while providing a VSWR
less than 1.2:1 in excess of 700MHz.
APPLICATIONS
FEATURES AND BENEFITS
• Reliable & Repeatable termination of RG178 coax cable to a
PCB to replace hard solder connections
• Cost effective replacement of standard coax connectors in
low frequency applications for RG178 cable
• Standard Microminiature type RF products: GPS, Radio
Boards, Meters, RFID and data communications
• Application notes: refer to 201-01-131
• “Gas Tight” IDC termination for long term reliability
• Simple strip, insert and press down termination
process
• High temperature endurance testing for
1000 hrs at 125ºC
• Industrial operating temperature range
for harsh environments
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 0.5A
(Current limit is cable dependent)
• Voltage Rating: 125V
• VSWR less than 1.2:1 in excess
of 700MHz
• Operating Temperature:
-40ºC to +125ºC
• Insulator Material: Nylon 46: UL94 V-O
• Contact Material: Phosphor Bronze,
Tin Plated
• Latching Cap: Single Use
• Cable retention: 10N in each axis
HOW TO ORDER
00
9178
001
00X
Prefix
Series
Number of Ways
Cable Type
001 = RG178B/U
(M17/93-RG178)
No of
Code
Ways Details
001
1
Page 76
X
06
Insulator Color
Code Color
0
Black
1
White
Application
Industrial
Lighting
Plating
Option
06 = Pure Tin
all over
FEBRUARY 2015
■ 75
IDC SMT Coax 1 Position
INTERCONNECT
00-9178
CONNECTOR DETAILS - RG178B/U
CABLE INSERTION DIRECTION
ALSO REFER TO PAGE 77 FOR
PACKING ORIENTATION
NOTES:
1. CONNECTOR FOR RG178B/U (M17/93-RG178) MIL SPEC COAX CABLE.
FOR OTHER CABLES REFER TO AVX FOR FURTHER INFORMATION.
2. FOR FURTHER DETAILS REFER TO ELCO PRODUCT SPECIFICATION
201-01-130 AND APPLICATION NOTES 201-01-131.
3. GENERAL TOLERANCE ±0.20 UNLESS SPECIFIED.
4. CONNECTOR SUPPLIED AS SHOWN WITH THE CAP IN THE UP
POSITION.
WIRED CONNECTOR
NOTES:
1. CONNECTOR SHOWN IN ASSEMBLED
CONDITION, CAP PUSHED DOWN.
2. CAP LOCKS IN LOWER POSITION,
TERMINATION CANNOT BE REMADE.
3. FOR FULL DETAILS REFER TO
APPLICATION NOTES 201-01-131.
4. CONNECTOR FOR RG178B/U
(M17/93-RG178) MIL SPEC COAX
CABLE ONLY.
5. ALL LOOSE MATERIAL MUST BE
REMOVED FROM TRIMMED CABLE.
76 ■ FEBRUARY 2015
IDC SMT Coax 1 Position
00-9178
INTERCONNECT
SUGGESTED PCB LAYOUT
NOTES:
1. PADS SHOWN FOR CONNECTOR FEET ONLY, OTHER DETAILS WILL DEPEND ON
THE CUSTOMERS PCB SPECIFICATION AND PERFORMANCE REQUIREMENTS.
2. OUTLINE OF THE CONNECTOR.
3. TYPICAL CIRCUIT CONFIGURATION:
BRAID CONNECTED THROUGH BOARD TO GROUND PLANE.
CENTER CONDUCTOR TRACK 1.5MM WIDE ON 0.8MM THICK PCB
PACKING DETAILS
REEL QTY
LEADER
TRAILER
700
480MM
120MM
NOTES:
1. PACKING IN TAPE AND REEL.
2. PIECES PER REEL.
3. PARTS TO BE IN THE CORRECT ORIENTATION.
FEBRUARY 2015
■ 77
IDC SMT Coax 1 Position
INTERCONNECT
00-9178
HAND ASSEMBLY TOOL
NOTES:
1. USE 9176 CAP APPLICATION
TOOL 06-9176-7018-01-000.
2. DETAILS OF ASSEMBLY
PROCEDURE REFER TO
APPLICATION NOTES 201-01-131.
78 ■ FEBRUARY 2015
AMERICAS
EUROPE
ASIA-PACIFIC
ASIA-KED
(KYOCERA Electronic Devices)
AVX Greenville, SC
AVX Limited, England
Tel: 864-967-2150
Tel: +44-1276-697000
AVX Northwest, WA
AVX S.A.S., France
Tel: 360-699-8746
Tel: +33-1-69-18-46-00
AVX/Kyocera, Asia, Ltd.,
Hong Kong
AVX Midwest, IN
AVX GmbH, Germany
Tel: +852-2363-3303
Tel: 317-861-9184
Tel: +49-0811-95949-0
AVX/Kyocera (S) Pte Ltd.,
Singapore
KED Hong Kong Ltd.
Tel: +852-2305-1080/1223
Tel: +65-6286-7555
AVX Mid/Pacific, CA
AVX SRL, Italy
AVX/Kyocera Yuhan Hoesa,
South Korea
Tel: 408-988-4900
Tel: +39-02-614-571
Tel: +82-2785-6504
AVX Northeast, MA
AVX Czech Republic
Tel: 617-479-0345
Tel: +420-57-57-57-521
AVX/Kyocera HK Ltd.,
Taiwan
KED Hong Kong Ltd.
Shenzen
Tel: +86-755-3398-9600
KED Company Ltd.
Shanghai
Tel: +86-21-3255-1833
KED Hong Kong Ltd.
Beijing
Tel: +86-10-5869-4655
Tel: +886-2-2656-0258
AVX Southwest, CA
AVX/ELCO UK
Tel: 949-859-9509
Tel: +44-1638-675000
AVX/Kyocera (M) Sdn Bhd,
Malaysia
AVX Canada
ELCO Europe GmbH
Tel: +60-4228-1190
Tel: 905-238-3151
Tel: +49-2741-299-0
AVX South America
AVX S.A., Spain
AVX/Kyocera International
Trading Co. Ltd.,
Shanghai
Tel: +55-11-4688-1960
Tel: +34-91-63-97-197
Tel: +86-21-3255 1933
AVX Benelux
AVX/Kyocera Asia Ltd.,
Shenzen
Tel: +65-6509-0328
Tel: +86-755-3336-0615
Kyocera Corporation
Japan
AVX/Kyocera International
Trading Co. Ltd.,
Beijing
Tel: +81-75-604-3449
Tel: +31-187-489-337
KED Taiwan Ltd.
Tel: +886-2-2950-0268
KED Korea Yuhan Hoesa,
South Korea
Tel: +82-2-783-3604/6126
KED (S) Pte Ltd.
Singapore
Tel: +86-10-6588-3528
AVX/Kyocera India
Liaison Office
Tel: +91-80-6450-0715
Contact:
A KYOCERA GROUP COMPANY
http://www.avx.com
S-SPEC0M215-N