MOBO Spring Contact Interconnect Solutions

MOBO® Connectors
www.avx.com
AVX MOBO® Spring Contact
Interconnect Solutions
Version 13.8
INTERCONNECT
Table of Contents
BATTERY CONNECTORS SERIES 9155. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Battery; Standard Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Battery; Reduced Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Battery; Ultra Low Profile
Battery; Solderless
.......................................................7
..............................................................9
Battery; 3.0mm Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Battery; 2.5mm Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SINGLE COMPRESSION CONTACT BOARD TO BOARD (BTB) SERIES 70-9155 . . . 17-19
Nominal Working Height 1.00mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Nominal Working Height 1.50mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
SIM CARD CONNECTORS SERIES 9162 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-27
Slide-In SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SIM Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
SIM Connector with Locking Latch
SIM/microSD Micro Combination
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
BOARD TO BOARD, SERIES 9158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-35
SOLO Stacker, 9158 Series
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Staggered SOLO Stacker, 9188 Series
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Ultra Low Profile Stacker, 9258 Series
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
I/O CONNECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-48
Standard I/O, 15 Position, 9157 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Standard I/O, 19 Position, 9157 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Reduced Size I/O, 9257 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Mini I/O, 9257 Series
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements,
information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any
kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that
any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all applications.
1
9155 Standard Battery
GENERAL DESCRIPTION
The standard battery connector is specifically designed for mobile equipment.
The connectors are available in 3, 4 and 5 contact positions all on a 2.50mm
pitch. The insulator height provides a 3mm spacing, with various contact
nose heights from 1.20mm to 2.60mm, to provide spacing options to the
end user.
All contacts are stamped and are rated to 3A, with Gold plating. Parts are
supplied in tape and reel for automatic pick and place. Optional retaining
brackets are available to provide greater strength when connected to the PCB.
Whatever your requirements, the 9155 series Battery Connector can also be
customized to suit your applications.
APPLICATIONS
KEY FEATURES AND BENEFITS
•
•
•
•
•
•
•
•
•
Mobile Phones
PDA
Medical
PMR
Industrial
3 Way
Battery Connector
7.50 (0.295)
4 Way
Battery Connector
2 PITCHES
@ 2.5 = 5.00
(0.098 = 0.197)
1.25 (0.049)
1.25
(0.049)
Suitable for 5000 mechanical cycles.
Variety of contact heights offered to suit different mechanical designs.
Connectors can be end to end stackable.
RoHS Compliant available.
10.00 (0.394)
1.40 (0.055) REF
1.25 (0.049)
1.25
(0.049)
0.00 +0.10 -0
(0.00 +0.004 -0)
2
8.00
(0.315)
1.40 (0.055) REF
3.00 ± 0.08
(0.118 ± 0.003)
1.40 (0.055) REF
3.00 ± 0.08
(0.118 ± 0.003)
3.05
(0.120)
TYP
CONTACT TAILS TO BE
WITHIN A 0.1 (0.004)
COPLANARITY RANGE
WHEN INSULATOR IS
SITTING ON DATUM FACE.
0.00 +0.10 -0
(0.00 +0.004 -0)
4 PITCHES
@ 2.5 = 10.00
(0.098 = 0.394)
1.25 (0.049)
1.25
(0.049)
8.00
(0.315)
3.05
(0.120)
TYP
CONTACT TAILS TO BE
WITHIN A 0.1 (0.004)
COPLANARITY RANGE
WHEN INSULATOR IS
SITTING ON DATUM FACE.
12.50 (0.492)
3 PITCHES
@ 2.5 = 7.50
(0.098 = 0.295)
8.00
(0.315)
3.00 ± 0.08
(0.118 ± 0.003)
5 Way
Battery Connector
3.05
(0.120)
TYP
CONTACT TAILS TO BE
WITHIN A 0.1 (0.004)
COPLANARITY RANGE
WHEN INSULATOR IS
SITTING ON DATUM FACE.
0.00 +0.10 -0
(0.00 +0.004 -0)
9155 Standard Battery
3 Way PCB Board Layout
3.60 (0.142)
4 Way PCB Board Layout
BRACKET PAD AREA
(ELECTRICALLY ISOLATED)
3.60 (0.142)
BRACKET PAD AREA
(ELECTRICALLY ISOLATED)
2.50 (0.098)
2.50 (0.098)
3.95
(0.156)
7.30
(0.287)
7.30
(0.287)
3.95
(0.156)
PAD 1.50 X 1.50
(0.059 X 0.059)
(3 POSITIONS)
2 PITCHES
@ 2.5 = 5.00
(0.098 = 0.197)
PAD 1.50 X 1.50
(0.059 X 0.059)
(4 POSITIONS)
3 PITCHES
@ 2.50 = 7.50
(0.098 = 0.295)
5 Way PCB Board Layout
2.50 (0.098)
BRACKET PAD AREA
(ELECTRICALLY ISOLATED)
3.60
(0.142)
7.30
(0.287)
3.95
(0.156)
PAD 1.50 X 1.50
(0.059 X 0.059)
(5 POSITIONS)
4 PITCHES
@ 2.5 = 10.00
(0.098 = 0.394)
HOW TO ORDER
00
9155
003
00
1
01
Prefix
00 = Standard
58 = Special
Series
No of
Ways
3 = 003
4 = 004
5 = 005
Standard Battery
Connector
00 = Standard Force
Contact Height
1 = 1.20 (0.047) / 1.50 (0.059)
2 = 1.80 (0.071) / 2.10 (0.083)
3 = 2.30 (0.091) / 2.60 (0.102)
Bracket
01 = With Bracket
6
Plating Option
6 = 0.4μm Selective Gold,
Pure Tin Tail
8 = 0.8μm Selective Gold,
Pure Tin Tail
3
9155 Size Reduced Battery Connector
GENERAL DESCRIPTION
The newest product in AVX’s Interconnect family of
battery connectors saves 50% in volume over the initial
9155 series compression connectors as illustrated in
the photograph. These connectors are rated at a full 3
amps per contact on 2.5mm centers. Sizes range from
2 positions through 5 positions and are end to end
stackable.
APPLICATIONS
•
•
•
•
Cellular Phones
Handheld Devices
Industrial Modules
Medical Electronics
KEY FEATURES AND BENEFITS
• 2.4mm insulator height
• 3 amps/contact
• Large SMT mounting area for
positive mechanical attachment
• 5k mating cycles
• End-to-end stackable
HOW TO ORDER
00
9155
Prefix
Series
003
201
No. of Ways
Reduced Size Battery Connector
Code No. of Ways
002
2
003
3
004
4
005
5
4
Reel Qty Packing Qty
2000
2000
2000
2000
2000
2000
2000
2000
Code
Description
201
Reduced Size
Battery Connector
XXX
Plating Option
Code
Description
006 0.4μm Selective Gold, Pure Tin Tail
008 0.8μm Selective Gold, Pure Tin Tail
9155 Size Reduced Battery Connector
2 Way Reduced Battery Connector
5.00 (0.197)
5.30 (0.209)
3 Way Reduced Battery Connector
7.50 (0.295)
5.30 (0.209)
2.50 (0.098)
2.50 (0.098)
0.90
(0.035)
0.10
(0.004)
2.40 (0.094)
2.40 (0.094)
0.90 (0.035)
5.00 (0.197)
1.2 (0.047)/
1.5 (0.059)
SECTION X - X
SHOWING CONTACTS
DEFLECTED TO 2.5mm
4.00 (0.157)
1.2 (0.047)/
1.5 (0.059)
CONTACT TAILS TO
BE WITHIN 0.13
COPLANARITY
RANGE
CONTACT TAILS TO
BE WITHIN 0.13
COPLANARITY
RANGE
4.00 (0.157)
0.10
(0.004)
5.00 (0.197)
SECTION X - X
SHOWING CONTACTS
DEFLECTED TO 2.5mm
4.92 (0.194) REF
SECTION X - X
4.92 (0.194) REF
SECTION X - X
4 Way Reduced Battery Connector
10.00 (0.394)
5.30 (0.209)
5 Way Reduced Battery Connector
12.50 (0.492)
5.30 (0.209)
2.50 (0.098)
2.50 (0.098)
0.10
(0.004)
2.40 (0.094)
0.90
(0.035)
2.40 (0.094)
0.90
(0.035)
0.10
(0.004)
5.00 (0.197)
5.00 (0.197)
CONTACT TAILS TO
BE WITHIN 0.13
COPLANARITY
RANGE
SECTION X - X
SHOWING CONTACTS
DEFLECTED TO 2.5mm
4.00 (0.157)
4.92 (0.194) REF
SECTION X - X
1.2 (0.047)/
1.5 (0.059)
4.00 (0.157)
1.2 (0.047)/
1.5 (0.059)
CONTACT TAILS TO
BE WITHIN 0.13
COPLANARITY
RANGE
SECTION X - X
SHOWING CONTACTS
DEFLECTED TO 2.5mm
4.92 (0.194) REF
SECTION X - X
5
9155 Size Reduced Battery Connector
2 Way Reduced Battery Connector
PCB Layout
3 Way Reduced Battery Connector
PCB Layout
1.50 (0.059)
TYP
PAD AREA MAY
BE REDUCED AT
CUSTOMER
DISCRETION
DOTTED LINE REPRESENTS
THE OUTSIDE DIMENSIONS
OF THE INSULATOR
4 Way Reduced Battery Connector
PCB Layout
5.00 (0.197)
DOTTED LINE REPRESENTS
THE OUTSIDE DIMENSIONS
OF THE INSULATOR
5 Way Reduced Battery Connector
PCB Layout
1.50 (0.059)
TYP
0.35 (0.014)
1.50 (0.059)
TYP
5.00 (0.197)
0.35 (0.014)
5.30 (0.209)
5.00 (0.197)
5.30 (0.209)
2.20 (0.087)
2.20 (0.087)
6
0.35 (0.014)
5.00 (0.197)
1.50 (0.059)
TYP
0.35 (0.014)
5.30 (0.209)
5.00 (0.197)
2.50
(0.098)
PAD AREA MAY
BE REDUCED AT
CUSTOMER
DISCRETION
PAD AREA MAY
BE REDUCED AT
CUSTOMER
DISCRETION
5.30 (0.209)
2.20 (0.087)
2.20 (0.087)
10.00 (0.394)
7.50 (0.295)
DOTTED LINE REPRESENTS
THE OUTSIDE DIMENSIONS
OF THE INSULATOR
PAD AREA MAY
BE REDUCED AT
CUSTOMER
DISCRETION
DOTTED LINE
REPRESENTS
THE OUTSIDE
DIMENSIONS OF
THE INSULATOR
9155 Ultra-Low Profile Battery
GENERAL DESCRIPTION
The AVX Interconnect group has released a new ultra-low profile 3 amp
per contact connector for battery pack or slide-in module applications.
The compressed “Z” axis height of 1.3mm leads the industry from a profile standpoint. The initial product is in a 2 & 3 position configuration with
other sizes expected to follow. The connector has an integral end block to
act as a mechanical stop.
APPLICATIONS
•
•
•
•
KEY FEATURES
AND BENEFITS
Cellular Phones
Handheld Devices
Industrial Modules
Medical Electronics
•
•
•
•
Ultra-Low Profile
3 amps/contact
Integral End Stop
5k mating cycles
HOW TO ORDER
Prefix
Series
003
101
No. of Ways
Low Profile Battery Connector
Code No. of Ways Qty. Per Reel
002
2
1500
003
3
1200
2 Way Low Profile Battery Connector
Description
Operating Height
101
Low Profile
Battery Connector
1.30 (0.051)
Code
Description
006 0.4μm Selective Gold, Pure Tin Tail
008 0.8μm Selective Gold, Pure Tin Tail
3 Way Low Profile Battery Connector
0.84
(0.033)
2.00
(0.079)
2.50 (0.098)
1.20
(0.047)
Plating Option
Code
1.20
(0.047)
DOTTED LINE
IS CONTACT
CENTER LINE
DOTTED LINE
IS CONTACT
CENTER LINE
2.00
(0.079)
9.10 (0.358)
7.60 (0.299)
5.10 (0.201)
6.60 (0.260)
0.84
(0.033)
XXX
5.00 (0.197)
9155
SECTION A-A
CONTACT UNDEFLECTED
CONTACT SHOWN WITH STOP
RESTING ON PCB
BATTERY PACK
INSERTION DIRECTION
SECTION A-A
CONTACT UNDEFLECTED
0.70 (0.028)
7.57 (0.298)
1.30 (0.051) MAX
2.75 (0.108)
0.70 (0.028)
7.57 (0.298)
2.60 (0.102)
BATTERY PACK
INSERTION DIRECTION
Ø 2.00 PICK AND
PLACE AREA
OR RECTANGLE
1.30 (0.051) MAX
2.60 (0.102)
2.75 (0.108)
Ø 2.00 PICK AND
PLACE AREA
OR RECTANGLE
2 EQUAL PITCHES
@ 2.50 (0.098) = 5.00 (0.197)
00
CONTACT SHOWN WITH STOP
RESTING ON PCB
7
9155 Ultra-Low Profile Battery
2.20 (0.087)
10.00 (0.394)
11.95 (0.470)
1.50 (0.059)
2.20 (0.087)
DOTTED LINE
IS CONTACT
CENTER LINE
2.50 (0.089) TYP
3 Way Low Profile Battery Connector
PCB Layout
0.60 (0.024)
2.50 (0.089)
2.20 (0.087)
0.60 (0.024)
1.50 (0.059)
2 Way Low Profile Battery Connector
PCB Layout
2.20 (0.087)
10.00 (0.394)
11.95 (0.470)
8
DOTTED LINE
IS CONTACT
CENTER LINE
9155 MOBO®
Solderless Battery Connectors
GENERAL DESCRIPTION
4.25
(0.167)
2°
7
6.00 (0.236)
3 X 3.0 PITCHES=9.0
(3 X 0.118 PITCHES=0.354)
+0
11.81
(0.465)
14.50 -0.1
+0
(0.571 -0.004)
4.40
(0.173)
2 TYP
(0.079 TYP)
2.75 (0.108)
3 X 3.0 PITCHES=9.0
(3 X 0.118 PITCHES=0.354)
+0
+0
1.00 -0.05 (0.040 -0.002)
R1 TYP
1.60
(0.063)
9.90 ±0.08
(0.039 ±0.003)
EJECTOR FACE (SEE NOTE 8)
1.60
(0.063)
CONNECTOR
OUTLINE
2.00 (0.079)
1.00 (0.040)
58 9155 004 000 020
2.95 (0.116)
1.20 (0.047)
As an addition to our range of Battery connectors we have added
a solderless termination option. This option has the termination
area gold plated and the contact form is compression to the PCB
and to the Battery which is used in the end equipment.
Rated at 3 Amps and 5,000 operations (the same as the SMT
version). These battery connectors compliment the existing
standard range of RoHS compliant components giving the
designer an added option of the solderless termination.
When these connectors are held in place by the casing of the end
equipment, the connection to the PCB is achieved by compressing the connector contacts against the PCB and against the actual
battery. It is the housing which maintains the connection.
2.75
(0.108)
R1 M
0.040)
R1 MAX TYP
5.70 (0.224)
4.4 (0.173)
SECTION AA
SUGGESTED PCB LAYOUT
2.95
(0.116)
R 0.70
(0.028)
2.77
(0.109)
2°
3.55 (0.140)
5.05 ±0.15
(0.199 ±0.006)
4.54 (0.179)
0.5 (0.020)
A
A
+0.03
0.50 -0.1
+0.012
(0.020 -0.004)
R1 MAX TYP
A
1.02 (0.040)
2.40 (0.094)
FULLY DEFLECTED CONTACT
10.00 (0.394)
0.80 X 45°
(0.031 X 45°)
0.80
(0.031)
0.69
(0.027)
TAIL PCB LAYOUT
9.00 (0.354)
1.00 (0.039)
7.63 (0.300)
1.25 (0.049)
0.3
(0.012) 0.86 (0.034)
X 3 POSNs
6.50 (0.256)
0.80
(0.031)
A
7.20 (0.283)
0.85 (0.033)
1.20 (0.047)
1.00 (0.039)
3.50
(0.138)
0.35 X 45°
(0.014 X 45°)
2.50
(0.098)
6.00
(0.236)
0.35 X 45°
(0.014 X 45°)
3.00
(0.118)
6.50 (0.256)
58 9155 003 000 053
1.25
(0.049)
2.22
(0.087)
4.50
(0.177)
CONNECTOR
OUTLINE
0.70
(0.028)
0.50 (0.020)
9.00 (0.354)
2 PITCHES @
3.00 = 6.00
(0.118 = 0.236)
0.50
(0.098)
1.80 X 2.80
(0.071 X 0.110)
GOLD PADS
9
9155 MOBO®
3.0mm Pitch Right Angle
Battery Connectors
GENERAL DESCRIPTION
A further addition to the battery connector range offered by
AVX is a 90 degree version. On a 3mm pitch, offered in 2 to
5 contact positions and rated as with all of the battery range
at 3 amps. The connector’s design is small and compact to
minimize its profile yet stable while having a contact point
4.61mm above the PCB.
The stability comes from the addition of extra SMT anchor
brackets that are in between the SMT contact pads and both
at the front of the connector and within the row of the contact SMT pads.
As with the other 9155 series of battery connectors offered
by AVX the 90 degree version is rated at 3 amps and 5000
mating cycles, RoHS compliant and using high temperature
plastic enables the connectors to be processed at up to
260ºC.
APPLICATIONS
FEATURES AND BENEFITS
•
•
•
•
• Simple designed spring contact
• End to end stackable for larger pin counts
• Additional contact anchor brackets to added
stability on the PCB
• Robust to shock and vibration
• Selectively plated contact area
Mobile phones
Digital music players
Hand held terminals
Data terminals or any other small portable device
HOW TO ORDER
00
9155
Prefix
Series
002
301
No. of Ways
Right Angle
Battery Connector
Code No. of Ways
002
2
003
3
004
4
005
5
10
Code
Description
301 Right Angle 3.00mm
Battery Connector
XXX
Plating Option
Code
Description
006 0.4μm Selective Gold, Pure Tin Tail
008 0.8μm Selective Gold, Pure Tin Tail
9155 MOBO®
3.0mm Pitch Right Angle
Battery Connectors
2 Way Right Angle Battery Connector
1.19 - 1.49
(0.047 - 0.059)
6.00
(0.236)
3 Way Right Angle Battery Connector
1.19 - 1.49
(0.047 - 0.059)
0.90 (0.035)
NOSE WIDTH
4.64
(0.183)
ANCHOR
BRACKET
6.00
(0.236)
0.90 (0.035)
NOSE WIDTH
4.64
(0.183)
ANCHOR
BRACKET
1.25 (0.049)
TAIL WIDTH
1.00
(0.039)
1.00
(0.039)
3.23
(0.127)
0 90 (0 035)
5.90
(0.232)
3.23
(0.127)
1.25 (0.049)
TAIL WIDTH
8.90
(0.350)
3.00
(0.118)
2 PITCHES @
3.00 (0.118) = 6.00 (0.236)
0.05-0.23
(0.002-0.009)
0.05-0.23
(0.002-0.009)
CONTACT AND
BRACKET TAILS TO
BE WITHIN 0.10
COPLANARITY RANGE
mm (inches)
mm (inches)
4 Way Right Angle Battery Connector
1.19 - 1.49
(0.047 - 0.059)
6.00
(0.236)
3.23
(0.127)
5 Way Right Angle Battery Connector
1.19 - 1.49
(0.047 - 0.059)
0.90 (0.035)
NOSE WIDTH
4.64
(0.183)
1.00
(0.039)
ANCHOR
BRACKET
6.00
(0.236)
3.23
(0.127)
ANCHOR
BRACKET
1.25 (0.049)
TAIL WIDTH
14.90 (0.587)
3 PITCHES @
3.00 (0.118) = 9.00 (0.354)
4 PITCHES @
3.00 (0.118) = 12.00 (0.472)
0.05-0.23
(0.002-0.009)
CONTACT AND
BRACKET TAILS TO
BE WITHIN 0.10
COPLANARITY RANGE
0.90 (0.035)
NOSE WIDTH
4.64
(0.183)
1.00
(0.039)
1.25 (0.049)
TAIL WIDTH
11.90
(0.469)
mm (inches)
CONTACT AND
BRACKET TAILS TO
BE WITHIN 0.10
COPLANARITY RANGE
0.05-0.23
(0.002-0.009)
mm (inches)
CONTACT AND
BRACKET TAILS TO
BE WITHIN 0.10
COPLANARITY RANGE
11
9155 MOBO®
3.0mm Pitch Right Angle
Battery Connectors
2 Way Right Angle Battery Connector
PCB Layout
3.46
(0.136)
3 Way Right Angle Battery Connector
PCB Layout
3.00 (0.118)
PURE TIN PAD
1.25 x 1.35
(0.049 x 0.053)
1 POSITION
3.46
(0.136)
PURE TIN PAD
0.90 x 1.00
(0.035 x 0.039)
1 POSITION
PURE TIN PAD
1.25 x 1.35
(0.049 x 0.053)
2 POSITIONS
PURE TIN PAD
0.90 x 1.00
(0.035 x 0.039)
2 POSITIONS
0.50 (0.020)
3.00 (0.118)
1.50 (0.059)
PURE TIN PADS
1.50 x 1.00
(0.059 x 0.039)
2 POSITIONS
2 PITCHES @
3.00 (0.118) = 6.00 (0.236)
PURE TIN PADS
1.50 x 1.00
(0.059 x 0.039)
3 POSITIONS
mm (inches)
mm (inches)
4 Way Right Angle Battery Connector
PCB Layout
5 Way Right Angle Battery Connector
PCB Layout
2 PITCHES @
3.00 (0.118) = 6.00 (0.236)
3.46
(0.136)
PURE TIN PAD
1.25 x 1.35
(0.049 x 0.053)
3 POSITIONS
PURE TIN PAD
1.25 x 1.35
(0.049 x 0.053)
4 POSITIONS
3 PITCHES @
3.00 (0.118)
= 9.00 (0.354)
3.46 (0.136)
PURE TIN PAD
0.90 x 1.00
(0.035 x 0.039)
3 POSITIONS
1.50 (0.059)
4 PITCHES @
3.00 (0.118) = 9.00 (0.354)
mm (inches)
12
PURE TIN PAD
0.90 x 1.00
(0.035 x 0.039)
4 POSITIONS
PURE TIN PADS
1.50 x 1.00
(0.059 x 0.039)
4 POSITIONS
1.50 (0.059)
4 PITCHES @
3.00 (0.118) = 12.00 (0.472)
mm (inches)
PURE TIN PADS
1.50 x 1.00
(0.059 x 0.039)
5 POSITIONS
9155 MOBO®
2.5mm Pitch Right Angle
Battery Connector
GENERAL DESCRIPTION
AVX extends the battery connector range with the addition of
a low profile 2.5mm pitch right angle connector. This
connector is offered in 2 to 5 positions and is rated at 3 amps.
The connector’s design is small and compact to minimize
its profile yet functionally stable having a contact point at
2.20mm above the PCB.
The unique design of this stamped contact allows for a
maximum insulator height of 4.0mm which makes it size
compatible with more expensive pogo pin style battery
connectors.
The complete family of battery connectors from AVX offer all
of the same advantages; Beryllium Copper base material for
enhanced contact performance, a full 3 amp current rating,
selective gold plating for 5000 mating cycles and high
temperature plastic for RoHS soldering.
APPLICATIONS
KEY FEATURES AND BENEFITS
• Mobile Phones
• Digital Music Players
• Any Handheld Devices
•
•
•
•
•
Reliable stamped contact with coined nose
Full 1.5mm nose deflection for large operating range
Two anchor tabs for mechanical stability
5000 cycle durability rating
Minimized X, Y and Z package dimensions
HOW TO ORDER
00
9155
Prefix
Series
002
541
XXX
No. of Ways
Right Angle
Battery Connector
Plating Option
Code No. of Ways
002
2
003
3
004
4
005
5
Code
541
Description
Right Angle 2.5mm
Battery Connector
Code
Description
006 0.4μm Selective Gold, Pure Tin Tail
008 0.8μm Selective Gold, Pure Tin Tail
13
9155 MOBO®
2.5mm Pitch Right Angle
Battery Connector
2 Way Right Angle Battery Connector
7.50 (0.295)
6.50 (0.256)
1.00 (0.039) TYP
CONTACT NOSE RETAINED
ANTI-SNAG FEATURE
4.50
(0.177) 4.00
(0.157)
DEFLECTED CONNECTOR
1.40 (0.055) TYP
2.50
(0.098)
1.50 (0.059) NOSE TRAVEL
UNDEFLECTED CONTACT
2.00
(0.079)
0.10 ± 0.10
(0.004 ± 0.004)
CONTACT TO BASE
OF INSULATOR
3.80
(0.150)
2.10
(0.083)
COPLANARITY
0.10 (0.004) Maximum
3 Way Right Angle Battery Connector
10.0 (0.394)
9.00 (0.354)
1.00 (0.039) TYP
4.50
(0.177) 4.00
(0.157)
CONTACT NOSE RETAINED
ANTI-SNAG FEATURE
DEFLECTED CONNECTOR
1.40 (0.055) TYP
2 PITCHES
@ 2.50 = 5.00
(0.098 = 0.197)
1.50 (0.059) NOSE TRAVEL
UNDEFLECTED CONTACT
2.00
(0.079)
3.80
(0.150)
2.10
(0.083)
COPLANARITY
0.10 (0.004) Maximum
14
0.10 ± 0.10
(0.004 ± 0.004)
CONTACT TO BASE
OF INSULATOR
9155 MOBO®
2.5mm Pitch Right Angle
Battery Connector
4 Way Right Angle Battery Connector
12.5 (0.492)
11.5 (0.453)
1.00 (0.039) TYP
4.50
(0.177) 4.00
(0.157)
CONTACT NOSE RETAINED
ANTI-SNAG FEATURE
DEFLECTED CONNECTOR
1.40 (0.055) TYP
3 PITCHES
@ 2.50 = 7.50
(0.098 = 0.295)
1.50 (0.059) NOSE TRAVEL
UNDEFLECTED CONTACT
2.00
(0.079)
0.10 ± 0.10
(0.004 ± 0.004)
CONTACT TO BASE
OF INSULATOR
3.80
(0.150)
2.10
(0.083)
COPLANARITY
0.10 (0.004) Maximum
5 Way Right Angle Battery Connector
15.0 (0.591)
14.0 (0.551)
1.00 (0.039) TYP
CONTACT NOSE RETAINED
ANTI-SNAG FEATURE
4.50
(0.177) 4.00
(0.157)
DEFLECTED CONNECTOR
1.40 (0.055) TYP
4 PITCHES
@ 2.50 = 10.0
(0.098 = 0.394)
1.50 (0.059) NOSE TRAVEL
UNDEFLECTED CONTACT
2.00
(0.079)
3.80
(0.150)
0.10 ± 0.10
(0.004 ± 0.004)
CONTACT TO BASE
OF INSULATOR
2.10
(0.083)
COPLANARITY
0.10 (0.004) Maximum
15
9155 MOBO®
2.5mm Pitch Right Angle
Battery Connector
2 Way Right Angle Battery Connector
PCB Layout
3 Way Right Angle Battery Connector
PCB Layout
8.80 (0.346)
6.30 (0.248)
0.50
(0.020)
2 PADS 1.30 x 1.00
(0.051 x 0.039)
2.50
(0.098)
0.50
(0.020)
2 PITCHES
@ 2.50 = 5.00
(0.098 = 0.197)
2.15
0.15
(0.006) (0.085)
2.15
0.15
(0.006) (0.085)
4.00
3.45
(0.157) (0.136)
2 PADS 1.50 x 2.15
(0.059 x 0.085)
4.00
3.45
(0.157) (0.136)
2 PADS 1.50 x 2.15
(0.059 x 0.085)
CONNECTOR OUTLINE
CONNECTOR OUTLINE
AREA TO BE KEPT
CLEAR FROM
TRACKS/EXPOSED COPPER
4.50 (0.177)
6.50 (0.256)
7.00 (0.276)
9.00 (0.354)
4 Way Right Angle Battery Connector
PCB Layout
11.3 (0.445)
3 PITCHES
@ 2.50 = 7.50 (0.098 = 0.295)
0.50
(0.020)
4 PADS 1.30 x 1.00
(0.051 x 0.039)
2.15
0.15
(0.006) (0.085)
4.00
3.45
(0.157) (0.136)
2 PADS 1.50 x 2.15
(0.059 x 0.085)
CONNECTOR OUTLINE
9.50 (0.374)
11.5 (0.453)
AREA TO BE KEPT
CLEAR FROM
TRACKS/EXPOSED COPPER
5 Way Right Angle Battery Connector
PCB Layout
13.8 (0.543)
4 PITCHES
@ 2.50 = 10.0 (0.098 = 0.394)
0.50
(0.020)
5 PADS 1.30 x 1.00
(0.051 x 0.039)
0.15
(0.006)
2.15
(0.085)
4.00
3.45
(0.157) (0.136)
2 PADS 1.50 x 2.15
(0.059 x 0.085)
CONNECTOR OUTLINE
12.0 (0.472)
14.0 (0.551)
16
2 PADS 1.30 x 1.00
(0.051 x 0.039)
AREA TO BE KEPT
CLEAR FROM
TRACKS/EXPOSED COPPER
AREA TO BE KEPT
CLEAR FROM
TRACKS/EXPOSED COPPER
Single Compression Contact:
Board-to-Board (BTB)
Series 70-9155
Designers for ruggedized connectors to meet harsh environments continue to look
for new products which will reduce size and cost without jeopardizing performance.
The new Ultra-Low Profile (ULP) compression contact from AVX surface mounts to
a PCB and provides a reliable compression connection to the mating board, even
under extreme shock and vibration applications. With over 20 years of 1-Piece
compression contact experience, this innovative contact offers full connector
performance functionality at the individual contact level. Thus, allowing single
contacts to be placed in any location or position on a PCB.
The high force beryllium copper contact is gold plated to maximize reliability and
signal integrity. The current offering has two contacts with nominal heights of
1.0mm and 1.5mm. Add in the “Z” axis tolerance range and the compressed height
covers 0.75mm up to 1.75mm. The contacts are supplied in tape and reel for easy
SMT placement.
APPLICATIONS
FEATURES AND BENEFITS
• Industrial/Ruggedized handheld or portable
devices
• BTB connection for any traditional power or
signal application
• Ground connections between PCB’s or
housings
• Reliable gold plated Beryllium Copper contacts for high cycle life
and signal integrity up to 1000 cycles
• Tape and reel packaged for automated SMT placement
• Sweeping beam design for pluggable/module applications
• Three gold plating options to match end product environmental or
expected life requirements
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 3 Amps
• Voltage Rating: Based on placement distance
• Operating Temperature:
-40ºC to +125ºC
• Contact Material: Beryllium Copper
• Contact Plating: Gold over Nickel
• Durability: 50, 500 and 1000 cycles
HOW TO ORDER
70
9155
001
Prefix
Series
Number
of Ways
6XX
00X
Contact Description
Nominal
Code
Operating Height
610
1.00mm
615
1.50mm
Contact Operating
Height Range
0.75mm to 1.25mm
1.25mm to 1.75mm
Contact Description
Gold
Code
Thickness
004
0.1µm
006
0.4µm
008
0.8µm
Description
Nickel under Plate, Gold on Nose
Tin on Remainder
Nickel under Plate, Gold on Nose
Tin on Remainder
Nickel under Plate, Gold on Nose
Tin on Remainder
Availability
Standard
Special
Order
Special
Order
17
Single Compression Contact:
Board-to-Board (BTB)
Series 70-9155
70-9155-001-610-006
NOMINAL WORKING HEIGHT 1.00MM
FULLY DEFLECTED
CONTACT
SUGGESTED MATING
PCB LAYOUT
SUGGESTED SMT
PCB LAYOUT
18
NOTES:
1. 9155 LOW PROFILE CONTACT, WORKING HEIGHT 0.75MM TO 1.25MM.
2. FOR FULL DETAILS REFER TO PRODUCT SPECIFICATION 201-01-153 AND
APPLICATIONS NOTES 201-01-154.
3. MATERIAL: COPPER ALLOY 0.2MM THICK.
4. PLATING: NICKEL ALL OVER WITH GOLD ON CONTACT NOSE AND TIN ON THE
REMAINDER. PARTS TO BE PACKED IN TAPE AND REEL. QTY PER REEL 3000.
5. OUTLINE OF CONNECTOR, ORIENTATION END “A”.
6. AREA TO KEPT FREE OF SOLDER RESIST, FURTHER INFORMATION IN
APPLICATION NOTES.
7. AREA BETWEEN PADS TO BE KEPT CLEAR OF TRACKS AND COMPONENTS.
8. SMT PADS PLATED TIN.
9. MATING PAD PLATED GOLD OVER NICKEL.
PACKING DETAILS
Single Compression Contact:
Board-to-Board (BTB)
Series 70-9155
70-9155-001-610-006
NOMINAL WORKING HEIGHT 1.50MM
FULLY DEFLECTED
CONTACT
SUGGESTED MATING
PCB LAYOUT
SUGGESTED SMT
PCB LAYOUT
NOTES:
1. 9155 LOW PROFILE CONTACT, WORKING HEIGHT 0.75MM TO 1.25MM.
2. FOR FULL DETAILS REFER TO PRODUCT SPECIFICATION 201-01-153 AND
APPLICATIONS NOTES 201-01-154.
3. MATERIAL: COPPER ALLOY 0.2MM THICK.
4. PLATING: NICKEL ALL OVER WITH GOLD ON CONTACT NOSE AND TIN ON THE
REMAINDER. PARTS TO BE PACKED IN TAPE AND REEL. QTY PER REEL 3000.
5. OUTLINE OF CONNECTOR, ORIENTATION END “A”.
6. AREA TO KEPT FREE OF SOLDER RESIST, FURTHER INFORMATION IN
APPLICATION NOTES.
7. AREA BETWEEN PADS TO BE KEPT CLEAR OF TRACKS AND COMPONENTS.
8. SMT PADS PLATED TIN.
9. MATING PAD PLATED GOLD OVER NICKEL.
PACKING DETAILS
19
9162 Slide-In SIM Card Connector
GENERAL DESCRIPTION
The standard SIM connector is specifically designed for handheld devices
requiring secure subscriber identification.
Following on from the introduction of our standard SIM block with an offering
of 3 standard heights, 0.80mm, 1.60mm, or 2.40mm, AVX is now adding
another standard to the 9162 series SIM connectors, the slide-in SIM.
Unlike SIM blocks which require SIM card guides to aid insertion, removal and
retention of the SIM card, the slide-in SIM has guides as part of the connector
mold design.
Contacts are stamped, gold plated, rated 0.5A, and 5000 mechanical cycles.
Our contact design is specifically rounded to avoid any possible damage
during and after card insertion to the card itself, assuming normal use. The
design also incorporates protection features to avoid contact damage during
this operation such as contact snagging.
Please contact the appropriate sales office for further details of this service.
KEY FEATURES AND BENEFITS
• Produced for use with mini SIM cards.
• The insulator is molded from high temperature plastic enabling the
connector to be used in convection or infrared soldering processes.
• Supplied on tape and reel packaging for pick and place assembly.
• The all plastic design, assuming normal use prevents damage to the
SIM card on insertion.
• Optional SMT contact size:
Standard SMT contact size – 1.60mm x 1.60mm
Narrow SMT contact size – 1.05mm x 0.60mm
• RoHS Compliant available.
Standard SMT Contact Layout
Narrow SMT Contact Layout
12.6 (0.496)
11.6 (0.457)
10.06 (0.396)
9.06 (0.357)
7.52 (0.296)
6.52 (0.257)
13.0 (0.512)
11.2 (0.441)
10.46 (0.412)
8.66 (0.341)
7.92 (0.312)
6.12 (0.241)
10.36
(0.408)
12.16
1.74 (0.479)
(0.069)
15.7
(0.618)
16.4 (0.646)
20
0.06
(0.002)
10.35
(0.407)
11.85
1.75 (0.467)
(0.069)
15.7
(0.618)
16.4 (0.646)
0.25
(0.010)
9162 Slide-In SIM Card Connector
Connector Height 1.75mm
16.4 (0.646)
1.75 (0.069)
CONNECTOR
HEIGHT
A
11.4 (0.449)
Z
5.10 – 5.60
(0.201 – 0.220)
H
12.9 – 13.4
(0.508 – 0.528)
12.02
(0.473)
0.20 H
15.7
(0.618)
15.2
(0.598)
T
+0.00 /+0.15
(0.000 / +0.006)
0.60 ±0.10
(0.024 / +0.004)
T
Z
6.05
(0.238)
4.85
(0.191)
B
SECTION Z-Z
A
B
Standard
Narrow
1.46 (0.057)
1.05 (0.041)
1.60 (0.063)
0.60 (0.024)
0.93
(0.037)
15.1 (0.594)
0.60
(0.024)
SECTION T-T
HOW TO ORDER
00
9162
006
Prefix
00 = Standard
58 = Special
Series
No. of Contacts
006 = 6
2X 6
SIM Type
20 = Standard SMT
Footprint
21 = Narrow SMT
Footprint
XXX
Plating Options
Selective Gold,
Pure Tin Tail
Connector Height
XXX refers to
Connector Height
175 = 1.75mm stack height
21
9162 SIM Card Block
GENERAL DESCRIPTION
The standard SIM connector is specifically designed for handheld devices
requiring secure subscriber identification.
The connectors are available in a standard 6 pin configuration on a 2.54mm
pitch with a 0.8mm height.
Contacts are stamped, gold plated, rated at 0.5A, and 5000 mechanical
cycles.
Our contact design is specifically rounded to avoid any possible damage
during and after card insertion to the card itself, assuming normal use. The
design also incorporates protection features to avoid contact damage during
this operation such as contact snagging.
Please contact the appropriate sales office for further details.
KEY FEATURES AND BENEFITS
• Produced for use with both full ISO cards and mini SIM cards.
• The insulator is molded from high temperature plastic enabling the
connector to be used in convection or infrared soldering processes.
• Supplied on tape and reel packaging for pick and place assembly.
• RoHS Compliant.
0.8mm PCB Pad Layout
2 PITCHES
@ 2.540 = 5.08
(0.100 = 0.200)
PCB PADS
(6 POSITIONS)
1.00
(0.039)
1.10 (0.043)
TYP
0.77 (0.030)
TYP
1.00
(0.039)
15.20 (0.598)
22
9162 SIM Card Block
Connector Height 0.8mm
0.60
(0.024)
0.80
(0.031)
8.64 (0.340)
12.10 (0.476)
ALL CONTACT TAILS WITHIN
0.10mm COPLANARITY TOLERANCE
15.00 (0.591)
1.00 (0.039)
TYP
0.19 (0.007)
TYP
0.670 (0.026)
REF TYP
2 PITCHES
@ 2.540 = 5.08
(0.100 = 0.200)
7.62 +0.25 -0
(0.300 +0.010 -0)
Illustration of Pin Configuration
PIN 1
PIN 1
HOW TO ORDER
00
9162
006
006
Prefix
Series
Number of Contacts
SIM Type
006 = Selective Gold,
Pure Tin Tail
080
Connector Height
080 = 0.8mm stack height
23
9162 SIM Connector
with Locking Latch
GENERAL DESCRIPTION
For 9162 Slide-IN & 9162 SIM/microSD
• Accepts GSM Standard 11.11 cards
• Secure locking latch mechanism
• Robust, good resistance against shock and vibration
• SIM Installed Height – 1.50mm
• Polarized to eliminate improper insertion of the card
KEY FEATURES AND BENEFITS
•
•
•
•
SMT with locking hinged guide
2.50mm connector height
Selective gold on mating surface/tin on solder tails
Tape and reel packaging
HOW TO ORDER
00
9162
006
Prefix
Series
Number of
Contacts
SIM Type
30 = SMT with Locking
Hinged SIM Guide
3.30
(0.130)
SIM Height
Height of SIM Card: 1.50 (0.059)
Suggested PCB Layout
SIM PAD NUMBER TO
GSM 11.11 (ISO 7810)
9.64 17.2
(0.380) (0.677)
CONNECTOR PROFILE
13.3
(0.524)
3.65
(0.144)
Contact Plating
Selective Gold on
Contact Surface and
Tin on Solder Tails
30.0 (1.181) REF
OPEN
ELCO
SIMLOCK
150
Ø3.00 (0.118)
PICK UP AREA
OPEN
7.90
0.95 (0.311)
5.08
(0.200) (0.037)
2.54
7.55
(0.100)
(0.297)
30 1
NO PCB TRACKS IN
THESE AREAS
5.00
(0.197)
15.5
(0.610)
3.30
(0.130)
7.40
(0.291)
REF
26.5 (1.043)
30.0 (1.181)
2.54±0.05
(0.100±0.002)
3
1.90
(0.075)
TYP
2
2.50
(0.098)
LOCKED COVER
UNLOCKED COVER
5.50
(0.217)
12.2 (0.480)
1.70±0.05
(0.067±0.002)
TYP
5.50
(0.217)
15.2 (0.598)
4º TO 180º ANGLE
FOR CARD INSERTION
0.27 (0.011)
MATING POSITION
9.50
(0.374)
24
7.60
(0.299)
1.50 (0.059)
SIM HEIGHT
6
5
1
27.4 (1.079)
24.4
(0.961)
1.40±0.05
(0.055±0.002)
TYP
5.08±0.05
(0.200±0.002)
0.40
(0.016)
REF
MAXIMUM COPLANARITY 0.10 (0.004)
BETWEEN CONTACT PADS
7
17.2
(0.677)
REF
9162 Slide-In Low Profile
SIM Connector
GENERAL DESCRIPTION
•
•
•
•
Six position Slide-In SIM
Low Profile – 0.70mm to SIM base
Side bracket to add solder security
SIM guidance using the side walls
KEY FEATURES AND BENEFITS
•
•
•
•
•
SMT Slide-In SIM
Molded in high temperature LCP
0.38μm Gold on contact surface and gold flash on contact tails
1.60mm connector height
Tape & Reel packaging
HOW TO ORDER
00
9162
006
40 1
Prefix
Series
Number of
Contacts
SIM Type
40 = SMT, Slide-in SIM
070
Contact Plating
0.38μm Gold on Contact
Surface and Gold Flash on
Solder Tails. Underplated
1.27μm Nickel.
SIM Height
Height of SIM Card: 0.70 (0.028)
Suggested PCB Layout
15.65 (0.616)
12.05 (0.474)
3.00
(0.118)
5.98
(0.235) 2.54
(0.100)
7.78
(0.306)
2.54
(0.100)
16.7
(0.657)
5.08
(0.200)
REF
2.10 (0.083) TYP
1.80
(0.071)
7.90
(0.311)
16.45 5.08
(0.648) (0.200)
16.7
(0.657)
5.08
(0.200)
2.54
(0.100)
TYP
1.20
(0.047)
TYP
0.85
(0.033)
1.80
(0.071)
TYP
1.50
(0.059)
TYP
1.60
(0.063)
15.2
(0.598)
0.08
(0.003)
0.70 (0.028)
MATED CARD
25
9162 SIM/microSD Micro
Combination Connector
GENERAL DESCRIPTION
• Six position slide-in SIM connector & Push-Push microSD connector
• Allows two cards to be inserted into the same connector
• Card detect switch on the microSD
KEY FEATURES AND BENEFITS
•
•
•
•
•
•
Space saving connector combination
Integrates 2 connectors into 1
Contact Plating: Gold
Insulator molded from LCP UL94 V-O
Low profile 1.50mm to SIM
2.70mm connector height
HOW TO ORDER
00
9162
006
50 1
Prefix
Series
Number of
Contacts
SIM Type
50 = SMT with SIM
and microSD
Slots at 90º
0.60 (0.024)
MAX
1.00
(0.039)
Contact Plating
Gold Plating over Nickel
1.75 (0.069)
TYP
0.85
(0.033)
150
SIM Height
Height of SIM Card: 1.50 (0.059)
0.78
(0.031)
5 PITCHES
@ 1.27 = 6.35
(0.050 = 0.250)
4.47
(0.176)
SLOT FOR
SIM CARD
1.70
7.70 (0.067)
0.40 (0.303)
(0.016) REF
TYP
17.3
(0.681)
SLOT FOR
microSD Card
0.45
(0.018)
7 PITCHES
@ 1.10 = 7.70
(0.043 = 0.303)
SWITCH
TERMINALS
2.70 +0.10
-0.05
(0.106 +0.004
-0.002 )
6.35 (0.250)
REF
16.53 (0.651)
26
3.13
(0.123)
0.60 (0.024)
TYP
3.17
(0.125)
microSD
TERMINALS
17.15
(0.675)
1.18
(0.046)
SIM TERMINALS
9162 SIM/microSD Micro
Combination Connector
Connector on PCB
Recommended PCB Layout
15.8 (0.622)
1.95
(0.077)
1.10
(0.043)
2.90
(0.114)
0.50
(0.020)
TYP
4.45
(0.175)
0.85
(0.033)
4.90
(0.193)
1.70
(0.067)
2 SWITCH
PADS
0.60 x 0.85
(0.024 x 0.033)
17.15
(0.675)
1
2
3
8 microSD
PADS
0.60 x 0.85
(0.024 x 0.033)
Numbering
6 SIM
PADS
0.90 x 1.09
(0.035 x 0.043)
Numbering
1
5
2
6
3
17.9
7.70 (0.705)
1.10 (0.303)
(0.043)
TYP
4
5
6
7
8
13.48
(0.531)
7
2.45
(0.096)
2 LOCATING HOLES
1.27 (0.050)
TYP
6.35 (0.250)
0.45 (0.018)
TYP
8.30 (0.327)
PCB SPACE USED BY CONNECTOR
CARDS FULLY INSERTED
1.00 ± 0.20
(0.039 ± 0.008)
1.90 ± 0.20
(0.075 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
microSD Card - LOCK
microSD Card - UNLOCK
0.83
(0.033)
15.58 (0.613)
microSD Card - PUSH
NO CLEARANCE UNDER microSD Card
4.00
(0.157)
2.70
(0.106)
CARDS EXTRACTED
(Shown for reference only)
3 (0.726)
4.00
(0.157)
32.53 (1.281)
16.0 (0.630)
17.3
(0.681)
11.0
(0.433)
27.1
(1.067)
REF
17.3
(0.681)
S
S
1
2
3
4
5
6
7
8
11.0
(0.433)
9.80
(0.386)
1 5 2 6 3 7
15.0 (0.591)
16.53 (0.651)
0.79
(0.031)
44.6
(1.756)
1.50 (0.059) MAXIMUM
CLEARANCE UNDER
SIM CARD
18.43 (0.726)
27.5
(1.083)
CONTACT FUNCTIONS (ISO7816):
1. Supply Voltage Vcc
2. Reset
3. Clock
5. Ground
6. Program Voltage Vpp
7. I/O
MICRO SD FUNCTIONS:
S. Switch
S. Switch
1. DAT 2
2. CD/DAT 3
3. CMD
4. Vdd
5. Clock
6. Vss
7. DAT 0
8. DAT 1
TOP OF CARD
0.75
(0.030)
15.0 (0.591)
16.53 (0.651)
27
9158 SOLO STACKER
GENERAL DESCRIPTION
The MOBO® series 9158 is a one-piece connector used to connect two PCBs
within mobile phones, pagers, PDAs, security, handheld scanners, etc. in a
cost-effective manner.
A standard range is available with 16, 20, 24 and 28 contacts to suit stack
heights of 1.90mm to 3.30mm. Other contact variants are also available up to
5.10mm, in custom housings. The SOLO STACKER can allow a spacing
tolerance of up to ±0.30mm and still provide reliable connections between the
PCBs, even if they are not parallel.
SOLO STACKER is designed for PCB surface mounting and is supplied in
tape and reel packaging. Gold plated pads on the mating PCB or suitable flex
circuits provide connection between the boards.
Whatever your requirements this SOLO STACKER can also be customized to
suit your applications.
APPLICATIONS
KEY FEATURES AND BENEFITS
Suitable applications include:
• Mobile Phones
• PDA
• Medical
• PMR
• Industrial
• Security
• Handheld Scanner
Single piece Connector – no mating half connector required to connect
two boards together which means:
• Reduced assembly time.
• Only one part to purchase and stock.
• Due to the unique contact design, the mating device does not have to
be parallel.
• Extremely robust when subjected to shock and vibration.
• Cost effective.
• Helps reduce tolerance accumulation within system.
DRAWINGS AND DIMENSIONS
“B”
FOR VERSION STACK HEIGHT 020 & 025
CONTACT PITCH 1.0 (0.039)
7.00 (0.276)
0.95 (0.037) REF
AVAILABLE VACUUM
PLACEMENT AREA
WEEK/YEAR
CODE
“A”
2.70
(0.106)
3.30
(0.130)
0.40 (0.016)
0/+0.20
(0/+0.008)
4.00 (0.157)
Ø 1.15
(0.045)
TYP
2.70
(0.106)
MAX
1.05
(0.041)
6.00 (0.236)
ALL TAILS WITHIN 0.15 (0.006) MAX COPLANARITY TOLERANCE
1.80
(0.071)
FOR VERSION STACK HEIGHT 030
7.00 (0.276)
4.80 (0.189)
3.70 - 4.00
(0.146 - 0.157)
4.00 (0.157)
6.00 (0.236)
28
0.04
(0.002)
4.20
(0.165)
1.90
(0.075)
2.70
(0.106)
Number of
Positions
16
20
24
28
Part Number
00-9158-016-XXX-XXX
00-9158-020-XXX-XXX
00-9158-024-XXX-XXX
00-9158-028-XXX-XXX
A = Number of contact pitches at 1mm
B = Connector Length
A
7
9
11
13
B
9.00
11.00
13.00
15.00
9158 SOLO STACKER
SMT PCB Footprint
Mating PCB Postions
CONTACT PITCH 1.0 (0.039)
5.40
(0.213)
5mm
(0.197)
4mm
(0.157)
3mm
(0.118)
2mm
(0.079)
SMT PCB
Mating
Height
2mm
3mm
4mm
5mm
PAD 0.60 x 1.00
(0.024 x 0.039)
TIN PLATED
Standard Positions
16
20
24
28
X
X
X
X
X
X
X
X
4
Special Positions*
18
30
32
40
X
X
X
X
X
Other sizes available on request.
*Please consult with factory for availability.
Mating PCB Footprint
for version stack height 020 & 030
Mating PCB Footprint
for version stack height 025
CONTACT PITCH 1.0 (0.039)
CONTACT PITCH 1.0 (0.039)
“A”
“B”
“B”
6.60
(0.260)
Ø 1.40*
(0.055)
Ø 1.40
(0.055)
6.00
(0.236)
KEEP THESE AREAS
FREE FROM
SOLDER RESIST
KEEP THESE AREAS
FREE FROM
SOLDER RESIST
PAD 0.70 x 1.70
(0.028 x 0.067)
GOLD PLATED
* Used for Boss versions only.
PAD 0.70 x 1.70
(0.028 x 0.067)
GOLD PLATED
B
16
20
24
28
Dim
6.00 (0.236)
8.00 (0.315)
10.00 (0.394)
12.00 (0.472)
HOW TO ORDER
00
9158
XXX
XXX
06
X
Prefix
00 = Standard
Series
No of
Ways
16 = 016
20 = 020
24 = 024
28 = 028
Stack Height
020 = 1.9mm to 2.1mm
025 = 2.1mm to 2.7mm
030 = 2.8mm to 3.3mm
Plating Variation
06 = Selective Gold
0.25μm
Gold Plated
Contact Nose,
Pure Tin Tail
PCB Location Bosses
1 = With PCB Location Bosses
2 = Without PCB Location Bosses
29
9188 Staggered SOLO Stacker
GENERAL DESCRIPTION
The SOLO series 9188 is a one-piece connector used to connect two PCBs in a cost effective manner.
A standard range is available with 4, 6, 8 staggered contacts to
suit stack heights of 1.1mm to 2.1mm (see table below).
SOLO Stacker is designed for PCB surface mounting and is
supplied in tape and reel packaging. Gold plated pads on the
mating PCB or suitable flex circuits provide connection between
the two boards.
APPLICATIONS
KEY FEATURES AND BENEFITS
Suitable applications include:
• Handheld Devices:
- Phones
- Scanners
- Radios
- Medical Diagnostic
- Security Devices
Single piece connector – no mating half required to connect
two boards together which means:
• Reduced assembly time
• Only one part to purchase and stock
• Due to the unique contact design, the mating device does
not have to be parallel
• Helps reduce tolerance accumulation within system
HOW TO ORDER
00
9188
004
012
062
Prefix
Series
No. of Ways
Stack Height
Plating Variation
06 = Selective Gold
0.25μm
Gold Plated
Contact Nose,
Pure Tin Tail
No Bosses
Code No. of Ways
004
4
006
6
008
8
30
Code
012
020
Height
1.1mm to 1.3mm
1.9mm to 2.1mm
No. of Ways
4 only
6 & 8 only
9188 Staggered SOLO Stacker
4 Way Staggered Stacker
5.20 (0.205)
MATING CONDITION
Ø 1.48 (0.058)
AVAILABLE VACUUM
PLACEMENT AREA
NOMINAL WORKING HEIGHT
2.06
(0.081)
REF
2.50
(0.098)
1.20
(0.047)
1.00
(0.039)
TYP
2.00
(0.079)
SECTION ON X - X
CONTACT NOSE HEIGHT
0.485
(0.019)
TYP
1.60
(0.063)
REF
0.00/0.20
(0.000/0.008)
2.50
(0.098)
0.40
(0.016)
TYP
ALL TAILS WITHIN
0.10 (0.004) MAXIMUM
COPLANARITY TOLERANCE
SMT PCB FOOTPRINT
3.00
(0.118)
MATING PCB FOOTPRINT
4.00 (0.157)
PAD 0.60 x 1.00
(0.024 x 0.039)
PURE TIN PLATED
(4 POSITIONS)
1.90/2.20
(0.075/0.087)
1.00
(0.039)
1.00
(0.039)
TYP
PAD 0.90 x 1.70
(0.035 x 0.067)
GOLD PLATED
(4 POSITIONS)
4.00 (0.157)
1.00
(0.039)
TYP
2.00
4.10
(0.161) (0.079)
1.90
(0.075)
2.00
(0.079)
KEEP THIS
AREA FREE
FROM SOLDER
RESIST
2.00
(0.079)
5.30 (0.209)
31
9188 Staggered SOLO Stacker
6 Way Staggered Stacker
7.20 (0.283)
Ø 1.48 (0.058)
AVAILABLE VACUUM
PLACEMENT AREA
MATING CONDITION
NOMINAL WORKING HEIGHT
2.04
(0.080)
REF
2.80
(0.110)
2.00
(0.079)
1.00
(0.039)
TYP
2.00
(0.079)
SECTION ON X - X
CONTACT NOSE HEIGHT
0.485
(0.019)
TYP
0.40
(0.016)
TYP
0.00/0.20
(0.000/0.008)
1.64
(0.065)
REF
2.50
(0.098)
ALL TAILS WITHIN
0.10 (0.004) MAXIMUM
COPLANARITY TOLERANCE
2.47/2.75
(0.097/0.108)
SMT PCB FOOTPRINT
PAD 0.60 x 1.00
(0.024 x 0.039)
PURE TIN PLATED
(6 POSITIONS)
4.00 (0.157)
3.00
(0.118)
MATING PCB FOOTPRINT
1.00
(0.039)
TYP
PAD 0.90 x 1.70
(0.035 x 0.067)
GOLD PLATED
(6 POSITIONS)
4.00 (0.157)
1.90
(0.075)
4.10
2.00
(0.161) (0.079)
3 PITCHES
@ 2.00 = 6.00
(0.079 = 0.236)
KEEP THIS
AREA FREE
FROM SOLDER
RESIST
32
1.70
(0.067)
3 PITCHES
@ 2.00 = 6.00
(0.079 = 0.236)
7.30 (0.287)
1.00
(0.039)
TYP
9188 Staggered SOLO Stacker
8 Way Staggered Stacker
9.20 (0.362)
Ø 1.48 (0.058)
AVAILABLE VACUUM
PLACEMENT AREA
MATING CONDITION
NOMINAL WORKING HEIGHT
2.04
(0.080)
REF
2.80
0.110)
2.00
(0.079)
1.00
(0.039)
TYP
2.00
(0.079)
SECTION ON X - X
0.485 (0.019)
TYP
0.00/0.20
(0.000/0.008)
1.64
(0.065)
REF
0.40
(0.016)
TYP
ALL TAILS WITHIN
0.10 (0.004) MAXIMUM
COPLANARITY TOLERANCE
2.50
(0.098)
2.45/2.75
(0.096/0.108)
SMT PCB FOOTPRINT
1.00 (0.039)
TYP
4.00 (0.157)
3.00
(0.118)
1.70
(0.067)
MATING PCB FOOTPRINT
2.00
(0.079)
TYP
PAD 0.90 x 1.70
(0.035 x 0.067)
GOLD PLATED
(8 POSITIONS)
4.00 (0.157)
1.00 (0.039)
TYP
2.00
(0.079)
TYP
1.90
(0.075)
PAD 0.60 x 1.00
(0.024 x 0.039)
PURE TIN PLATED
(8 POSITIONS)
4.10
2.00
(0.161) (0.079)
3 PITCHES
@ 2.00 = 6.00
(0.079 = 0.236)
KEEP THIS
AREA FREE
FROM SOLDER
RESIST
3 PITCHES
@ 2.00 = 6.00
(0.079 = 0.236)
9.30 (0.366)
33
9258 Ultra Low Profile Stacker
GENERAL DESCRIPTION
The SOLO series 9258 is a one-piece connector used to connect two PCBs in a cost effective manner.
This connector is a 1.0mm pitch available in an 8 position with
stack heights of 0.40mm and 0.80mm. It is available with or
without location bosses.
This connector is designed for PCB surface mounting and is
supplied in tape and reel packaging. Gold plated pads on the
mating PCB or suitable flex circuits provide connection between
the boards.
KEY FEATURES AND BENEFITS
APPLICATIONS
Single piece connector – no mating half connector required to
connect two boards together which means:
• Reduced assembly time
• Only one part to purchase and stock
• Due to the unique contact design, the mating device does
not have to be parallel
• Extremely robust when it comes to shock and vibration
Suitable applications include:
• Mobile phones
• Handheld scanners
• Portable medical devices
• Display interface
HOW TO ORDER
00
9258
008
XXX
06
X
Prefix
00 = Standard
Series
No of
Ways
Stack Height
004 = 0.40mm
008 = 0.80mm
Plating Variation
06 = Selective Gold
0.25μm
Gold Plated
Contact Nose,
Pure Tin Tail
PCB Location Bosses
1 = With Mating PCB Location Bosses (top side)
2 = Without PCB Location Bosses
3 = With SMT PCB Location Bosses (bottom side)
4 = With SMT and Mating PCB Location Bosses
(top and bottom sides)
34
9258 Ultra Low Profile Stacker
0.4mm Ultra Low Profile Stacker
0.8mm Ultra Low Profile Stacker
6.00
(0.236)
5.50
(0.217)
6.00
(0.236)
5.50
(0.217)
0.35
(0.014)
7 PITCHES
@ 1.00 = 7.00
(0.039 = 0.276)
10.35 9.35
(0.407) (0.368)
0.65
(0.026)
0.35
(0.014)
10.35 9.35
(0.407) (0.368)
0.65
(0.026)
Ø2.00
(0.079)
R 0.50 (0.020)
(4 POSITIONS)
R 0.50 (0.020)
(4 POSITIONS)
1.00 - 1.30
(0.039 - 0.051)
1.67 - 0.10
(0.066 - 0.004)
0.40
(0.016)
Ø1.00
(0.039)
ALL TAILS TO BE WITHIN
0.10 (0.004) MAXIMUM
COPLANARITY TOLERANCE
1.50
(0.059)
1.40 - 1.70
(0.055 - 0.067)
0.40
(0.016)
1.00
(0.039)
1.85 - 0.10
(0.073 - 0.004)
1.90
(0.075)
0.80
1.00 (0.031)
Ø1.00 (0.039)
(0.039)
PROPOSED SMT PCB LAYOUT
ALL PADS PURE TIN PLATE
Ø1.20
(0.047)
9.35 (0.386)
7 PITCHES
@ 1.00 = 7.00
(0.039 = 0.276)
1.68 (0.066)
0.10
(0.004)
CONNECTOR
OUTLINE
5.70
(0.224)
0.80 (0.031)
WITHOUT PCB
LOCATION BOSSES
0.70
(0.028)
PROPOSED MATING PCB LAYOUT
ALL PADS GOLD PLATE
1.68
(0.066)
WITH MATING PCB
LOCATION BOSSES
(TOP SIDE)
WITH SMT PCB
LOCATION BOSSES
(BOTTOM SIDE)
7 PITCHES
@ 1.00 = 7.00
(0.039 = 0.276)
CONNECTOR
OUTLINE
2.75
(0.108)
WITH PCB AND SMT
LOCATION BOSSES
Ø1.20
(0.047)
0.70 (0.028)
9.35 (0.368)
35
9157 I/O Connector
GENERAL DESCRIPTION
The 9157 series was specifically designed for portable equipment.
AVX now offers this two-part system as a standard product. The fixed SMT
socket is designed to be housed within the confined dimensional constraints
of the portable device.
The plug/cover connector has sprung contacts and is designed for termination to accessory equipment. The connector is designed to house fifteen
signal contacts on a 1mm pitch rated at 1.5A. There is the option to include a
switching RF coax.
A cradle SMT plug connector for docking applications is also available as
standard and has the option of including a SMT RF coax.
Whatever your requirements, the 9157 series can also be customized to suit
your application.
APPLICATIONS
KEY FEATURES AND BENEFITS
Suitable applications include:
• Mobile Phones
• PDA
• Medical
• Docking/Charging for any
portable device
• Patented 20º angled face on the socket gives self-cleaning face when
mated with plug.
• Metal Latching area integral to socket which saves PCB real estate.
• Integral to socket is a mechanical 50Ω switching coax for SMT
termination.
• Single sprung plug contact design gives ten thousand mating cycles
and cleaning/wiping action.
• Customer has option to terminate own RF coax using AVX custom tooling: 06-9157-7116-01-000.
• SMT plug has unique location pyramids that give positive alignment to
portable device, and assist blind mating.
• RoHS Compliant.
36
9157 I/O Connector
Plug Wire with Coax
Plug Wire without Coax
3.72
(0.146)
28.80 (1.134)
28.80 (1.134)
1.50
(0.059)
3.72
(0.146)
5.50
(0.217)
MAX
25.80 (1.016)
25.80 (1.016)
8.30
(0.327)
14 PITCHES
@ 1.00 = 14.00
(0.039 = 0.551)
14 PITCHES
@ 1.00 = 14.00
(0.039 = 0.551)
1.00 (0.039)
B
B
4.20
(0.165)
B
SMT Plug with Coax
1.00 (0.039)
4.20
(0.165)
SMT Plug without Coax
28.80 (1.134)
28.80 (1.134)
25.80 (1.016)
1.50
(0.059)
B
25.80 (1.016)
1.50
(0.059)
4.25
(0.167)
4.25
(0.167)
SMT CAP SHOWN ON
2 VIEWS ONLY
SMT CAP SHOWN ON
2 VIEWS ONLY
B
B
3.00
(0.118)
B
B
22.80 (0.898)
22.80 (0.898)
15 PADS @ 0.60 x 1.50
15 PADS @ (0.024 x 0.094)
15 PADS @ 0.60 x 1.50
15 PADS @ (0.024 x 0.094)
1.97
(0.059)
14 PITCHES @ 1.00 = 14.00
(0.039 = 0.551)
SUGGESTED PCB LAYOUT
0.9 x 2.50 PAD
2 POSNS
3.32
(0.131)
2.65
(0.104)
2.40 (0.094)
2.40 (0.094)
Ø 1.20 (0.047) PAD
1.97
(0.059)
2 THRU HOLES
Ø 2.00 (0.079)
2 THRU HOLES
Ø 2.00 (0.079)
4.15
(0.163)
14 PITCHES @ 1.00 = 14.00
(0.039 = 0.551)
SUGGESTED PCB LAYOUT
37
9157 I/O Connector
SMT Socket with Coax
5.75
(0.226)
SMT Socket without Coax
31.50 (1.240)
31.50 (1.240)
28.50 (1.122)
26.60 (1.047)
13.00 (0.512)
28.50 (1.122)
26.60 (1.047)
8.00
(0.315)
1.50
(0.059)
5.50
(0.217)
1.50
(0.059)
8.00
(0.315)
1.50
(0.059)
5.50
(0.217)
1.50
(0.059)
CLEARANCE HOLE Ø 1.20 (0.047)
TAPERED TO Ø 1.00 X 2.00 DEEP
(0.039) X (0.079)
R0.50 4 POSITIONS
14 PITCHES
@ 1.00 = 14.00
(0.039 = 0.551)
5.00
(0.197)
14 PITCHES
@ 1.00 = 14.00
(0.039 = 0.551)
5.00
(0.197)
SMT PAD LAYOUT
31.50 (1.240) REF
4.10
(0.161)
REF
5.60
(0.220)
REF
31.50 (1.240) REF
28.50 (1.122) REF
4.10
(0.161)
REF
0.10 (0.004) CLEARANCE
14 PITCHES
@ 1.00 = 14.00
(0.039 = 0.551)
1.0 (0.039)
PLATED THRU HOLE
(2 POSITIONS)
4.30 (0.169)
0.31 (0.012)
1.80
0.71
(0.071) (0.028) 3.50
(0.138)
1.05 (0.041)
2.45 (0.096)
38
28.50 (1.122) REF
0.8 (0.031) SQUARE PAD
(2 POSITIONS)
12.80 (0.504)
4.20 (0.165)
MAX
PAD 0.50 X 1.35
(0.020 X 0.053)
(19 POSITIONS)
5.60
(0.220)
REF
0.10 (0.004) CLEARANCE
14 PITCHES
@ 1.00 = 14.00
(0.039 = 0.551)
26.60 (1.047)
1.0 (0.039)
PLATED THRU HOLE
(2 POSITIONS)
4.30 (0.169)
0.31 (0.012)
1.80
0.71
(0.071) (0.028) 3.50
(0.138)
PAD 0.50 x 1.35
(0.020 X 0.053)
(15 POSITIONS)
12.80 (0.504)
MAX
0.8 (0.031) SQUARE PAD
(2 POSITIONS)
4.90 (0.193)
9157 I/O Connector
Cover Kit
32.20 (1.268) REF
35.05
(1.380)
REF
7.30
(0.287)
REF
28.58
(1.125)
REF
PLUG 10-9157-019-XXX-006
HOW TO ORDER
Plug Options – Example
10
9157
015
000
006
Prefix
10 = Plug
58 = Special
Series
No of
Ways
15 = 015
RF Coax Option
000 = No RF Coax
001 = With RF Coax
Contact Type
006 = Solder Wire
007 = SMT
Socket Options – Example
20
9157
015
000
006
Prefix
20 = Socket
58 = Special
Series
No of
Ways
15 = 015
RF Coax Option
000 = No RF Coax
001 = With RF Coax
Contact Type
006 = SMT
Cover Options – Example * Parts supplied in kit form
30
9157
9700
00
000
Prefix
30 = Sub Assembly
58 = Special
Series
Cover Version
9700 = Screw/Press-fit
Version
Standard
Grommet Variation
000 = No Grommet
035 = to suit ␾3.50 cable
050 = to suit ␾5.00 cable
Patent: 2276285
5540599
Note: Application tooling to terminate coax cable 06-9157-7116-01-000.
39
9157 MOBO®
19 Way I/O Connector
GENERAL DESCRIPTION
Based on our standard 15 way 9157 I/O family, AVX has now released a
family 19 way devices. This range includes a SMT 90 degree plug, a wire
socket version that is used with the standard 9157 cover and a SMT socket
for charging applications.
Options with the 90 degree SMT socket include the sealing of the connector contacts and the connector to the housing up to IP67. There is also an
option to have an EMLB (early mate, late break) on pins 1 and 19.
To achieve the seal to the device housing, it may be necessary to customize
the device housing design.
On the SMT 90 degree version, we also have the capability of an integrated
DC jack, enabling both the DC jack and the 19 way cover to be plugged in
at the same time.
AVAILABLE DEVICES:
10 9157 019 000 006
10 9157 019 000 007
20 9157 019 000 006
30 9157 97 XX 00 000
Plug wire version
SMT charging version
90 degree SMT socket
Cover options see page 39
Cover Kit
32.20 (1.268) REF
35.05
(1.380)
REF
28.58
(1.125)
REF
PLUG 10-9157-019-XXX-006
40
7.30
(0.287)
REF
9157 MOBO®
19 Way I/O Connector
Plug Wire
SMT Plug
28.80 (1.134)
25.80 (1.016)
1.50 ±0.10
(0.059 ±0.004)
28.80 ±0.10
(1.134 ± 0.004)
18.00 (0.709)
1.00
(0.039)
X
3.00 (0.118)
8.16 ±0.10
(0.321 ±0.004)
SMT CAP TO BE FITTED
CENTRALLY ON CONNECTOR
4.20 ±0.10
(0.165 ±0.004)
X
SMT Socket
SMT Plug
(Suggested PCB Layout)
31.50 (1.240)
28.50 (1.122)
26.60 (1.047)
22.00 (0.866)
5.75
(0.226)
22.80 (0.898)
2.90
(0.114)
17.00 (0.669)
19 PADS @ 0.60 x 2.40
(19 PADS @ (0.024 x 0.094)
A
1.50 (0.059)
2.40
(0.094)
8.00
5.50 (0.315)
(0.217)
1.50 (0.059)
R1.20 TYP
(R0.047 TYP)
A
2 THRU HOLES
Ø 1.60 (0.063)
Pin 1 and Pin 19 are early mate
late break contacts.
2.40 (0.094)
5.00 (0.197)
18 PITCHES
@ 1.00 = 18.00
(0.039 = 0.709)
2 SMT PADS
Ø 5.40 (0.213) O/D
SUGGESTED PCB LAYOUT
18 PITCHES @ 1.00 = 18.00
18 PITCHES @ (0.039 = 0.709)
SMT Socket
(Suggested PCB Layout)
26.60 (1.047)
18 PITCHES @ 1.00 = 18.00
18 PITCHES @ (0.039 = 0.709)
2 PADS 0.80 x 0.80
(0.031 x 0.031)
3.50
(0.138)
4.30 (0.169)
2 HOLES
Ø 1.00 (0.039)
19 PADS 0.50 x 1.35
(0.020 x 0.053)
R1.20
(R0.047)
SUGGESTED PCB LAYOUT
16.80 MAX
(0.661 MAX)
4.90
(0.193)
1.80
(0.071)
0.71
(0.028)
0.31
(0.012)
41
9257 Reduced Size I/O Connector
GENERAL DESCRIPTION
An I/O interconnect system designed for portable equipment.
AVX offers this plug and socket reduced size system as a standard product.
The fixed SMT socket is designed to be mounted on a PCB and housed within
a portable device. The plug is designed for cable termination with options of
single and double sided contacts and customizing the overmold cover or parts
can be supplied as connector only for sub contract termination. The socket
connector houses 16 contacts in two rows on 1.25mm pitch with a rating of
1 amp per contact. Both connectors are RoHS compliant.
APPLICATIONS
KEY FEATURES AND BENEFITS
Suitable applications include:
• Cellular Phones
• Handheld Devices
• Industrial Modules
• Medical Electronics
•
•
•
•
•
•
•
42
No latching is required due to the click design of the contacts.
Optional customization of the overmold cover.
Options of single row (8 way) or dual row (16 way) plug connector.
Compact size to optimize PCB real estate.
Metal outer cover provides integrated PCB location and solder tab.
Positive alignment and orientation of the plug and socket.
5K mating cycles and 1 amp rated.
9257 Reduced Size I/O Connector
Single Sided 8 Way I/O Plug Connector
Dual Sided 16 Way I/O Plug Connector
8.40
(0.331)
8.40
(0.331)
10.0 (0.394)
10.0 (0.394)
11.1 (0.437)
11.1 (0.437)
3.20
(0.126)
3.20
(0.126)
1.20
(0.047)
1.20
(0.047)
SECTION A-A
SECTION Z-Z
Suggested Overmolding for Plug Connector
5.00
(0.197)
MIN
OVERMOLDING MUST BE
CLEAR OF 5.00 (0.197) MIN.
TO ENSURE FULL MATING
WITH SOCKET CONNECTOR
25.08*
(0.987)
* Variable dimension to
suit customer design
and application.
HOW TO ORDER
10
9257
016
001
Prefix
10 = Plug Connector
Series
No of Ways
016 = 16 way dual sided
008 = 8 way single sided
Contact
001 = Solder Bucket
003
Plating Option
003 = 0.8μm Selective Gold,
Tin Tail
Notes:
1. All dimensions are for reference only unless toleranced.
2. For full product specification refer to AVX spec 201-01-089.
3. Parts packed in tube with 50 parts per tube.
43
9257 Reduced Size I/O Connector
16 Position I/O Socket
POLARIZATION
CHAMFER
SOLDER BRACKET/SHIELD
12.50 (0.492)
6.75 (0.266)
0.51
(0.020)
TYP
3.00
(0.118)
SECTION Z - Z
0.80
(0.031)
TYP
0.25 (0.010) TYP
REAR VIEW
FRONT VIEW
END VIEW
3.90
(0.154)
LOCATION PEGS
PCB Layout
12.50 (0.492)
1.10 (0.043)
0.15 (0.006)
Ø 1.00 (0.039)
LOCATION HOLES
(2 POSITIONS)
1.20
(0.047)
SMT PADS
2.70
(0.106)
1.80
1.15
(0.071) (0.045)
TYP
TYP
1.56 (0.061)
2.90
(0.114)
0.40
(0.016)
TYP
CONNECTOR
OUTLINE
15 PITCHES
@ 0.625 = 9.38
(0.025 = 0.369)
HOW TO ORDER
20
9257
016
001
01
3
Prefix
20 = Socket Connector
Series
No of
Ways
16 = 016
Contacts
001 = SMT Termination
Solder Bracket
01 = Solder Bracket
with location pegs
Plating Option
3 = 0.8μm Selective Gold,
Tin Tail
Packing Details
Reel Qty.
1100
Pack Qty.
5500
Notes:
1. 16 Way I/O Socket.
2. For full product specification refer to AVX spec 201-01-089.
3. General tolerance ±0.20 (0.008) unless otherwise stated.
4. SMT feet within 0.13 (0.005) coplanarity.
44
9257 Mini I/O Connector
GENERAL DESCRIPTION
AVX offers the 12 way mini I/O connector as a standard
product. The fixed SMT socket is designed to be mounted on
a PCB and housed within a portable device. The plug is
designed for cable termination with options of single and
double sided contacts. Parts can be supplied as connectors
only for sub contract termination, or with a custom overmold
cover. The socket connector houses 12 contacts in a single
row on 0.50mm pitch.
APPLICATIONS
KEY FEATURES AND BENEFITS
•
•
•
•
• No latching required due to the click design of the
contacts.
• Optional customization of the overmold cover.
• Compact size to optimize PCB real estate.
• Metal outer cover provides integrated PCB location and
solder tab.
• Positive alignment and orientation of the plug and socket.
Medical Electronics
Cellular Phones
Industrial Modules
Hand Held Devices
45
9257 Mini I/O Connector
9257 STANDARD 12 WAY MINI I/O PLUG
POSITION 1
POSITION 12
7.55 (0.297)
11 EQUAL SPACES
@0.50 (0.020) =
5.50 (0.217)
0.15 (0.006) TYP
0.20 (0.008) TYP
0.40
(0.016)
1.20 (0.047)
1.30 (0.051)
1.00 (0.039)
0.80 (0.031)
1.20
(0.047)
0.50
(0.020)
0.50 (0.020)
10.30
(0.406)
1.25
(0.049)
REF
7.70 (0.303)
6.00
(0.236)
4.00
(0.157)
0.20 (0.008)
1.85 (0.073)
1.55 (0.061)
5.40 (0.213)
POSITION 1
POSITION 12
4.00 (0.157)
8.60 (0.339)
HOW TO ORDER
10
Prefix
10 = Plug Connector
46
9257
012
Series
No of
Ways
12 = 012
101
Contacts
101 = Solder Tail
006
Plating Option
006 = 0.25μm Gold
over Nickel
9257 Mini I/O Connector
SUGGESTED OVERMOLDING FOR PLUG CONNECTOR
28.60*
(1.126)
MARKER
POSITION 1
5.00 (0.197)
POSITION 12
POSITION 1
DIMENSION MARKED WITH A * ARE
VARIABLE DIMENSION TO SUIT
CUSTOMER DESIGN AND APPLICATION
47
9257 Mini I/O Connector
9257 STANDARD 12 WAY MINI I/O SOCKET
10.84 (0.427)
8.20 (0.323)
0.18 (0.007) TYP
0.80
(0.031)
6.05
(0.238)
7.15
(0.281)
11 EQUAL SPACES
@0.50 (0.020) =
5.50 (0.217)
9.60 (0.378)
7.80 (0.307)
11 EQUAL SPACES
@0.50 (0.020) =
5.50 (0.217)
1.20
(0.047)
0.32
(0.013) TYP
1.70 (0.067) TYP
POSITION 1
0.20 (0.008) TYP
POSITION 12
2.00
1.30 (0.079)
(0.051)
1.00 (0.039)
5.18
(0.204)
5.28
(0.208)
8.40 (0.331)
2.00
(0.079)
0.50 (0.020) TYP
1.00 (0.039) TYP
2.95
(0.116)
8.40 (0.331)
1.00 (0.039)
1.57 (0.062)
(0.004)
0.05 (0.002) +0.10
–0.05 (0.002)
5.18 (0.204)
HOW TO ORDER
20
9257
012
101
01
6
Prefix
20 = Socket Connector
Series
No of
Ways
12 = 012
Contacts
101 = SMT Termination
Solder Bracket
01 = Solder Bracket
with location pegs
Plating Option
6 = 0.25μm Gold over Nickel
48
AMERICAS
EUROPE
ASIA-PACIFIC
ASIA-KED
(KYOCERA Electronic Devices)
AVX Greenville, SC
AVX Limited, England
Tel: 864-967-2150
Tel: +44-1276-697000
AVX Northwest, WA
AVX S.A.S., France
Tel: 360-699-8746
Tel: +33-1-69-18-46-00
AVX/Kyocera, Asia, Ltd.,
Hong Kong
AVX Midwest, IN
AVX GmbH, Germany
Tel: +852-2363-3303
Tel: 317-861-9184
Tel: +49-0811-95949-0
AVX/Kyocera (S) Pte Ltd.,
Singapore
KED Hong Kong Ltd.
Tel: +852-2305-1080/1223
Tel: +65-6286-7555
AVX Mid/Pacific, CA
AVX SRL, Italy
AVX/Kyocera Yuhan Hoesa,
South Korea
Tel: 408-988-4900
Tel: +39-02-614-571
Tel: +82-2785-6504
AVX Northeast, MA
AVX Czech Republic
Tel: 617-479-0345
Tel: +420-57-57-57-521
AVX/Kyocera HK Ltd.,
Taiwan
KED Hong Kong Ltd.
Shenzen
Tel: +86-755-3398-9600
KED Company Ltd.
Shanghai
Tel: +86-21-3255-1833
KED Hong Kong Ltd.
Beijing
Tel: +86-10-5869-4655
Tel: +886-2-2656-0258
AVX Southwest, CA
AVX/ELCO UK
Tel: 949-859-9509
Tel: +44-1638-675000
AVX/Kyocera (M) Sdn Bhd,
Malaysia
AVX Canada
ELCO Europe GmbH
Tel: +60-4228-1190
Tel: 905-238-3151
Tel: +49-2741-299-0
AVX South America
AVX S.A., Spain
AVX/Kyocera International
Trading Co. Ltd.,
Shanghai
Tel: +55-11-4688-1960
Tel: +34-91-63-97-197
Tel: +86-21-3255 1933
AVX Benelux
AVX/Kyocera Asia Ltd.,
Shenzen
Tel: +65-6509-0328
Tel: +86-755-3336-0615
Kyocera Corporation
Japan
AVX/Kyocera International
Trading Co. Ltd.,
Beijing
Tel: +81-75-604-3449
Tel: +31-187-489-337
KED Taiwan Ltd.
Tel: +886-2-2950-0268
KED Korea Yuhan Hoesa,
South Korea
Tel: +82-2-783-3604/6126
KED (S) Pte Ltd.
Singapore
Tel: +86-10-6588-3528
AVX/Kyocera India
Liaison Office
Tel: +91-80-6450-0715
Contact:
A KYOCERA GROUP COMPANY
http://www.avx.com
S-MOBO0M813-C