CompactPCI Connectors acc. to PIGMG 2.0 Rev. 3.0 General Late in 1999 PCI Industrial Computer Manufacturers Group (PICMG) introduced the new revision 3.0 of the CompactPCI Core Specification. Version 3.0 of this specification comprises a.o. hot swap and computer telephony specifications such as pin sequencing. For CompactPCI, the metric ERmet connectors are specified in accordance with IEC 61076-4-101 which are available in build types A, B, AB, and as monoblock versions. This new version of the CompactPCI specification has the consequence a.o. that for 3 HE backplanes on position P2 a male connector, build Catalog E 074486 01/15 Edition 2 type B with long connection pins for AB transfer and AB shrouds are inserted into position rP2. At the rear card end, on position rJ2, a sheilded female connector in build type AB is specified. For 6 HE backplanes, on P3 and P5, the male connector - build type B with long connection pins for AB transfer and AB shrouds have to be inserted into positions rP3 and rP5. At the rear card end, on positions rJ3 and rJ5, a shielded female connector, build type AB, has been specified here. On P4, a blade contact strip, build type A with long connection pins for A shroud and A shroud frames, has been specified on position rP4. For the rear card end, a shielded female connector, build type A, has been defined on rJ4. For male connectors with shrouds in build types A and B, the specification only requires a series a grounding for the upper screening panel. All necessary connectors required in accordance with the new CompactPCI specification are available from ERNI. In addition, for CompactPCI applications, ERNI also offers an economic solution for a male connector with long terminal pins, which is populated with shield contacts on row a only. In addition to the new AB compatible male connectors for CompactPCI, ERNI also supplies shrouds. Here, all shrouds are available in four different heights (3.9 mm, 4.5 mm, 5.3 mm, and 6.1 mm) in order to adapt to the printed circuit board thickness of the backplanes. 1 CompactPCI Connectors acc. to PIGMG 2.0 Rev. 3.0 Ordering Informations Male Connectors For Backplanes Type A With Peg Type A With Peg And Extended Terminals For Shrouding Type A Without Peg And With Extended Terminals Type B (AB Compatible) With Extended Terminals For Shrouding Type B (AB Compatible) With Extended Terminals For Shrouding Type B (AB Compatible) With Extended Terminals For Shrouding Type A With Extended Terminals For Shrouding Type A With Peg And Extended Terminals For Shrouding Type A With Peg And Extended Terminals For Shrouding Type B (AB Compatible) With Extended Terminals For Shrouding Type B (AB Compatible) With Extended Terminals For Shrouding Location On The PCB Number Of Positions* Contact Loading* Part Number P1 25 CB---BC 923190 P1 Special P1 25 25 TP---PT TS---ST 923197 923342 P2, P5 22 TSSSSS- 923345 P3 19 TSSSSST 923341 P3 P4 19 25 TSSSSSS----ST 923346 923347 P4 25 TRRRRRT 064688 P4 25 TSSSSST 103975 P5 Telecom 22 ------- 923339 P2, P5 22 TSSSSST 923340 Back Female Connectors For Daughter Cards Location On The PCB Number Of Positions* Part Number Type A With Shield, Without Peg Type A With Split Shield, Partially Loaded Type A With Split Shield, Partially Loaded Type AB With Shield, Without Peg Type AB With Shield, Without Peg Type B With Upper Shield Type B With Upper Shield J1, J4 J4 Telecom rJ4 Telecom rJ2, rJ5 rJ3 J2, J5 J3 25 25 25 22 19 22 19 Shrouds For Male Connectors Location On The PCB Number Of Positions* Height (mm) Part Number Type A Shroud 25 Positions Type A Shroud 25 Positions Type A Shroud 25 Positions Type A Shroud 25 Positions Type AB Shroud 22 Positions Type AB Shroud 22 Positions Type AB Shroud 22 Positions Type AB Shroud 19 Positions Type AB Shroud 19 Positions Type AB Shroud 19 Positions Type AB Shroud 19 Positions rP1, rP4 rP1, rP4 rP1, rP4 rP1, rP4 rP2, rP5 rP2, rP5 rP2, rP5 rP3 rP3 rP3 rP3 25 25 25 25 22 22 22 19 19 19 19 14.35 14.95 15.75 16.55 14.95 15.75 16.55 14.35 14.95 15.75 16.55 114436 054795 054794 054793 114426 114427 114428 114487 114488 114489 114490 Code Number Color Part Number Brilliant Blue Cadmium Yellow Strawberry Red Brilliant Blue Cadmium Yellow Strawberry Red 043347 043345 043350 043337 043335 043340 Coding Keys Application Coding Keys For Male Connectors And Shrouds Coding Keys For Male Connectors And Shrouds Coding Keys For Male Connectors And Shrouds Coding Keys For Female Connectors Coding Keys For Female Connectors Coding Keys For Female Connectors * Length = 50mm; Pitch = 2.0mm => 50 / 2 = 25 Positions **Cross Sectional Loading From Z To F Catalog E 074486 01/15 Edition 2 5.0 Volts P1 3.3 Volts P1 Telecom P4 5.0 Volts J1 3.3 Volts P1 Telecom J4 1567 3456 1248 2348 1278 3567 354142 104512 104697 114809 134075 354148 354146 Back 2 Back Metal plating of plated-through hole Back Metal plating of plated-through hole Back Metal plating of plated-through hole Back Metal plating of plated-through hole Back Metal plating of plated-through hole Back Metal plating of plated-through hole Back Metal plating of plated-through hole Back Metal plating of plated-through hole Back Metal plating of plated-through hole Back Metal plating of plated-through hole Back Metal plating of plated-through hole Back Metal plating of plated-through hole Bestueckungsplan 25 contact layout 15 11 8 5 1 e d c b a = bestueckt - assemble 25 15 11 8 5 1 e d 2 c b a 8 EE - Zone fuer 4x2= 2 2 10 x 2 = 20 Abschirmblech 8 10 x 2 = - shielding 20 Compliant zone for Abschirmblech 104514 durchkontaktierte Loecher Ø 0.6 ± 0.05 thru hole Ø 0.6 ± 0.05 - shielding 104515 50 max. 30.5 + 0.1 - 9.5 2 + 0.1 - 10.8 - 0.2 21 1.7 + 0.05 - 21.9 0.4 + 0.2 Id.-Nr. Anforderungsstufe 11.4 Datum class date 12.25 Lochbild fuer Leiterplatte Board hole pattern ( Bestueckungsseite ) ( Component mounting side ) 10 x 2 = 0.1 0.6 alle Loecher all holes 8 ( 20 ) 10 x 2 = ( 20 ) + 0.05 - Back 2 durchkontaktiert, Bohrloch 0.7 ± 0.02 plated thru, drill hole 0.7 ± 0.02 f e c 1.5 d b 13 11 1 2 15 5x2= ( 10 ) a 25 Metal plating of plated-through hole Fehlende Masse und Angaben nach IEC 61076 - 4 - 101 Missing information and dimensions per IEC 61076 - 4 - 10 XXXXXXXX Information : Abschirmblech oben montiert shielding mounted on top ohne Fixierstift 2:1 XXXXX - without locating pegs ERmet Federleiste A ERmet Female Type A 104512 Back Metal plating of plated-through hole Bestückungsplan - contact layout 2 1 e d c b a = bestückt - assemble 2 1 4x2= 8 2 e d c b a EE-Zone für durchkontaktierte Löcher [ 0.6 60.05 Compliant zone for thru hole [ 0.6 60.05 2 21 x 2 = 42 3-0.4 44max. XXXX ERNI 114809 2 22 10.8-0.2 1 21 1.760.05 2 Anforderungsstufe class Id.-Nr. Lochbild für Leiterplatte (Bestückungsseite) 11.4 Datum date 13.85 Board hole pattern (Component mounting side) 21 x 2 = (42) 0.1 0.6 +0.05 - alle Löcher all holes 2 durchkontaktiert, plated thru, drill hole 0.7 Bohrloch 0.7 Back 2 2 1.5 1 5x2= (10) f e d c b a Metal plating of plated-through hole Fehlende Masse und Angaben nach IEC 61076-4-101 Missing information and dimensions per IEC 61076-4-101 Information : Abschirmblech oben shielding mounted on top All rights Only for To insure that this is the version of this drawing, contact one of the ERNI before Subject to modification prior Drawing will not be Toleranc 2:1 Scal Designation ERmet Federleiste AB 22 ERmet Female Type AB 22 Elektroapparate D-73099 114809 I Back Metal plating of plated-through hole Bestückungsplan / contact layout 22 1 e d c b a = bestückt / assembled 22 1 4x2=8 2 e d c b a 2 21 x 2 = 42 Abschirmblech / shielding EN-Zone für durchkontaktierte Löcher Ø0,6 ±0,05 3 -0,4 44 max. 2 10,8 21 1,9 compliant zone for thru hole Ø0,6 ±0,05 11,4 Metal plating of plated-through hole 1) Board hole pattern (Component mounting side Lochbild für Leiterplatte (Bestückungsseite) Ø 0.6 ±0.05 Durchmesser des metallisierten Loches Ø 0.6 ±0.05 Diameter of finished plated-through hole Ø 0.7 ±0.05 Bohrungsdurchmesser des Loches Ø 0.7 ±0.05 Diameter of drilled hole 21 x 2 = (42) 0,05 alle Löcher Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 2 1) Metal plating of plated through hole see drawing 114406 5 x 2 = (10) f e d c 1,5 all holes b a 1 2 22 Back Fehlende Maße und Angaben nach IEC 61076-4-101 Missing information and dimensions per IEC 61076-4-101 shielding mounted on top Anforderungsstufe 2 / class 2 BA2 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Abschirmblech oben montiert Information: Tolerances 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. ERmet Federleiste B22 ERmet Female Type B22 354148 www.ERNI.com b 25.06.2012 Index Date Class ERMB22 I A3 Back Metal plating of plated-through hole 14,8 H 3,9 14,35 11,6 12 49,9 2 6x2= Back 2 2 10 x 2 = 20 8 10 x 2 = 20 Dimension Nr. Tolerances 5:1 Scale Material 16.55 054794 15.75 054795 14.95 114436 14.35 Ident-Nr. Mass H I.D. number dimension H Consider protection memo from DIN 34 054793 All Dimensions in mm All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Index Modification Nr. Date Date Name Tool-Nr.: siehe Einzelteile see pieceparts Designation ERmet A Übergaber. m. Klemmst ERmet A Shroud with clamp part Elektroapparate GmbH 054792 D-73099 ADELBERG Name O:00010255.SZN Class D H 3,9 14,35 11,6 43,9 21 x 2 = 42 2 14,8 2 6x2= 15,4 12 Back Dimension Nr. 114428 16.55 114427 15.75 114426 14.95 114425 14.35 Tolerances Scale Ident-Nr. Maß H I.D.number dimensions H Consider protection memo from DIN 34 All Dimensions in mm Date All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Index Modification Nr. Date Name Material 5:1 Tool-Nr.: siehe Einzelteile see pieceparts Designation ERmet AB 22 Überga. m. KLemmst. ERmet AB 22 Shroud with clamp Elektroapparate GmbH 114429 D-73099 ADELBERG Name O:00010299.SZN Class D 3,9 H 14,35 11,6 37,9 18 x 2 = 36 2 14,8 2 6x2= 15,4 12 Back Dimension Nr. 114490 16.55 114489 15.75 114488 14.95 114487 14.35 Tolerances 5:1 Scale Material Ident-Nr. Maß H I.D.number dimensions H Consider protection memo from DIN 34 All Dimensions in mm Date All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Index Modification Nr. Date Name Tool-Nr.: siehe Einzelteile see pieceparts Designation ERmet AB 19 Überg. m. Klemmst. ERmet AB 19 Shroud with clamp. Elektroapparate GmbH 114486 D-73099 ADELBERG Name O:00010296.SZN Class D Catalog E 074482 02/00 Edition 1 Coding Keys Ordering Information Coding keys for male connectors and shrouds Coding keys for female connectors Coding Key Coding Key Code Colour No. Part Number Code Colour No. Part Number Pastel Orange 3568 RAL 2003 Fincke 00233197 043342 Pastel Orange 1247 RAL 2003 Fincke 00233197 043332 Steel Blue 3478 RAL 5011 Fincke 00251197 043343 Steel Blue 1256 RAL 5011 Fincke 00251197 043333 Slate Grey 3467 RAL 7015 Fincke 00235197 043344 Slate Grey 1258 RAL 7015 Fincke 00235197 043334 Cadmium Yellow 3456 RAL 1021 Fincke 00252197 043345 Cadmium Yellow 1278 RAL 1021 Fincke 00252197 043335 Reseda Green 2578 RAL 6011 Fincke 00237197 043346 Reseda Green 1346 RAL 6011 Fincke 00237197 043336 Brilliant Blue 1567 RAL 5007 Fincke 00245197 043347 Brilliant Blue 2348 RAL 5007 Fincke 00245197 043337 Blue/Lilac 1356 RAL 4005 Fincke 00246197 043348 Blue/Lilac 2478 RAL 4005 Fincke 00246197 043338 Ocher Yellow 4678 RAL 1024 Fincke 00313197 043349 Ocher Yellow 1235 RAL 1024 Fincke 00313197 043339 Strawberry Red 1248 RAL 3018 Fincke 00312197 043350 Strawberry Red 3567 RAL 3018 Fincke 00312197 043340 Nut Brown 1236 RAL 8011 Fincke 00272197 043351 Nut Brown 4578 RAL 8011 Fincke 00272197 043341 Mounting Device For Coding-Keys 053593 http://Connect.ERNI.com/contact/ Back Back Back Back Back Back Schichtaufbau im metallisierten Loch fuer EE-Kontakt Metal plating of plated-through hole for EE-contact ø 0.7 Durchmesser des metallisierten Loches Diameter of finished plated-through hole ø 0.6 + 0.02 - + 0.05 - min. 0.1 min. 25 µm Cu Bohrungsdurchmesser des Loches Diameter of drilled hole Restringbreite Restring width Back max. 15 µm Sn / SnPb fuer Einpresszone D = 0.72 for press-fit zone D = 0.72 10:1 Lochaufbau D=0.6 Hole design D=0.6 114406