LED COLOR REV DIALIGHT PART NUMBER POSITION 1 POSITION 2 553-2203F BLANK YELLOW 553-2211F RED RED 553-2212F RED GREEN 553-2222F GREEN GREEN 553-2223F GREEN YELLOW 553-2232F YELLOW GREEN 553-2233F YELLOW YELLOW ECN NO REVISIONS DRN CKD APP RoHS Compliant 553-22XXF Thru Hole Bi-level CBI A Part Numbers with the "F" suffix ending are RoHS Compliant. Example: 553-2203F The bag packaging is marked with "RoHS Compliant" label or equivalent markings. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. B 553-2233F IN RoHS COMPLIANT NOTE TITLE WAS 550-2233F C ADDED P/N'S 553-2203F, -2211F, -2212F, 2222F,- 2223F, -2232F TO DRAWING; ADDED DUAL DIMS, LED AJF KLJ SCHEMATIC, ESDS LOGO NOTE 3 & 5 TO DRAWING. NEW RELEASE .103 [2,62] .170 #.005 [4,32 #0,12 ] TWC DATE TC N.O. 7-11-05 TWC NO 12-10-09 .320 #.010 [8,14 #0,25 ] CATHODE I.D. HOUSING 3mm LED TYP .380 #.010 [9,65 #0,25 ] LUMINOUS INTENSITY FORWARD VOLTAGE PEAK WAVELENGTH DOMINANT WAVELENGTH COLOR MIN TYP MAX YELLOW 10 30 50 RED 8.7 29 GREEN 32 50 YELLOW 2.1 2.8 RED 2.0 2.8 GREEN 2.1 2.8 YELLOW 585 RED 635 GREEN 565 YELLOW 588 RED 623 GREEN 569 YELLOW REVERSE CURRENT VIEWING ANGLE UNITS TEST CONDITIONS mcd IF = 10mA 2 V IF = 20mA .145 #.010 [3,68 #0,25 ] CATHODE LEAD .100 [2,54] RED 100 100 45 A .100 #.002 [2,54 #0,05 ] .100 #.002 [2,54 #0,05 ] CHARACTERISTICS DERATE LINEARLY FROM 50°C YELLOW RED GREEN UNITS 60 100 100 mW 0.25 0.4 0.4 mA/°C CONTINUOUS FORWARD CURRENT 20 30 30 mA PEAK FORWARD CURRENT ( 1/10 DUTY CYCLE, 0.1 µs PULSE WIDTH) 80 120 120 mA REVERSE VOLTAGE LEAD SOLDERING TEMPERATURE, 5 SEC., 1/16" FROM BODY 5 V 260 °C -55° TO +100 °C -55 TO +100 °C 1 3 TOP LED LEAD BOTTOM LED LEAD 4 3 2 1 .100 [2,54] TYP NOTES: 1. 2. 3. 4. LEADS TO BE FIT INTO HOLES .040 DIA. SPACED AS PER PATTERN. LEAD DIMENSIONS MEASURED AT HOUSING EXIT. UNITS TO BE PACKED IN MULTIPLES OF FIVE. PIN NUMBERS FOR REFERENCE ONLY, DESIGNATION NON-EXISTENT ON PART. 5. DIALIGHT PART NUMBER 553-22XXF. 6. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY, HANDLING, AND STORAGE IN ACCORDANCE WITH IPC-A-610. VR = 5V DEGREES 90 $TYP .175 [4,45] 100 POWER DISSIPATION STORAGE TEMPERATURE .018 SQ. [0,45] NOM. TYP .020 [0,51] TYP 1 .040±.002 [1,02 #0,05] TYP (4) nm ABSOLUTE MAXIMUM RATING AT 25 $C AMBIENT OPERATING TEMPERATURE POSITION 2 nm GREEN ALL .020 [0,51] TYP .100 #.010 [2,54 #0,25 ] OPERATING TEMPERATURES AT 25°C AMBIENT CHARACTERISTICS POSITION 1 .200 [5,08] DIRECTION OF LED RECOMMENDED HOLE PATTERN GAUGE PIN 2, 4 PIN 1, 3 CATHODE THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. SCALE: DRAWING SCALE LED SCHEMATIC ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES C-17265 TOLERANCES: UNLESS OTHERWISE SPECIFIED FRACTIONS: #1/64 DECIMALS (.XX): #.02 DECIMALS (.XXX): #.015 REV DRAWING NUMBER ALL DIM'S IN: INCHES (MM) TITLE C 3 mm BI-LEVEL Y-Y, RoHS COMPLIANT MATERIAL ANGLES: #3 $ FINISH: 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 FSCM 83330 SHEET 1 OF 1 FAMILY TABLE: