DIALIGHT PART NUMBER LED COLOR 597-2002-602F,-607F AllnGaP RED REV RoHS COMPLIANT 597-2XXX-60XF 597-2211-602F,-607F AlInGaP ORANGE 597-2222-602F,-607F AlInGaP YELLOW 597-2501-602F,-607F AlInGaP GREEN 597-2601-602F,-607F InGaN GREEN 597-2901-602F,-607F InGaN BLUE ATTENTION: Part Numbers with the "F" suffix ending are RoHS Compliant. For example: 597-2222-607F Reel and bag packaging are marked with "RoHS Compliant" label or equivalent markings. These parts can be used with RoHS reflow profile. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260 C $ temp. for 5 sec. OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES ECN NO REVISIONS A DRN CKD APP KLJ NEW RELEASE NO STORAGE TEMP. WAS "-30 TO +100" & OPERATING TEMP. WAS "20 TO +80" AJF KLJ FOR InGaN PARTS; ADDED P/N'S 597-2002-602F. -607F B DATE MES 1-7-09 NO 1-18-11 .008 [0,2] .039 [1] REINFORCING PIN (NON-ELECTRODE) .039 [1] LENS 2 CENTERING BOARD PC BOARD .118 [3] .012 [0,3] R.018 [0,45 ] TYP .079 [2] .197 .079 [5] [2] .035 [0,9] CATHODE ID .035 [0,9] LED DICE R.010 [0,25 ] TYP. .016 [0,4] TYP LUMINOUS DIRECTION 1 .079 [2] RECOMMENDED RoHS SOLDER PROFILE .059 [1,5] PIN 1 CATHODE PIN 2 NOTES: RECOMMENDED SOLDERING PAD LAYOUT LED SCHEMATIC OPERATING CHARACTERISTICS AT 25 $ C AMBIENT COLOR LUMINOUS INTENSITY (mcd) @ IF =20mA FORWARD VOLTAGE (V) @ IF =20mA MIN MIN TYP MAX AllnGaP RED 71 125 180 AlInGaP ORANGE 71 125 180 AlInGaP YELLOW 71 125 180 AlInGaP GREEN 28 50 71 InGaN GREEN 112 195 280 2.8 InGaN BLUE 71 125 180 2.8 REVERSE CURRENT ( A) PEAK VIEWING WAVELENGTH ANGLE (nm) (DEG) DOMINANT WAVELENGTH (nm) TYP MAX MAX 2.0 2.4 10 2.0 2.4 10 598 605 2.4 10 587 589 2.0 2.4 10 570 572 577 3.2 3.6 10 520 525 535 525 130 3.8 10 465 470 475 468 130 1.8 MIN TYP TYP TYP 639 130 612 611 130 592 588 130 574 130 MAX 631 InGaN GREEN InGaN BLUE UNITS POWER DISSIPATION 75 75 75 75 76 76 mW CONTINUOUS FORWARD CURRENT 30 30 30 30 20 20 mA 80 80 80 80 100 100 mA DERATE LINEARLY FROM 25 C $ REVERSE VOLTAGE 0.41 0.4 0.4 .069 #.004 [1,75 #0,1] .157 #.004 [4 #0,1] ABSOLUTE MAXIMUM RATINGS AT 25C $ AMBIENT AllnGaP AlInGaP AlInGaP AlInGaP RED ORANGE YELLOW GREEN (1/10 DUTY CYCLE, 0.1ms PULSE WIDTH) EPOXY COLOR: WATER CLEAR MOISTURE SENSITIVITY LEVEL 3. LEADS: 0.2 m GOLD (Au) OVER 4.0 m NICKEL (Ni) ON COPPER (Cu) BASE. TAPE & REEL AS PER EIA STANDARD 481-1-A; CATHODE SIDE TOWARDS SPROCKET. TAPE & REEL LEDS MAY REQUIRE RE-TAPING AFTER TWELVE MONTHS. PIN NUMBERS ARE FOR REFERENCE ONLY, DESIGNATION NON-EXISTENT ON PART. ...-602F SUFFIX MEANS PARTS PACKAGED ON A 20 PCS SAMPLE STRIP. ...-607F SUFFIX MEANS PARTS PACKAGED ON A 7" [ 180mm] REEL, 3000 PCS/REEL. 8. DIALIGHT PART NUMBERS: 597-2002-602F, -607F; 597-2211-602F, -607F; 597-2222-602F, -607F; 597-2501-602F, -607F; 597-2601-602F, -607F; 597-2901-602F, -607F 9. PACKAGING TO INCLUDE LABEL CONTAINING DIALIGHT P/N, DATE CODE/LOT NO., LUMINOUS INTENSITY AND COLOR BINS, QTY/REEL, AND COUNTRY OF ORIGIN. 10. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY, HANDLING, AND STORAGE IN ACCORDANCE WITH IPC-A-610. CATHODE COLOR PEAK FORWARD CURRENT 1. 2. 3. 4. 5. 6. 7. 0.4 0.25 0.25 mA/ $C 5 V STORAGE TEMPERATURE -55 TO +85 $C OPERATING TEMPERATURE -55 TO +85 $C SCALE: 15.000 .079 #.002 [2 #0,05] +.012 .138 #.002 .315 -.004 [3,5 #0,05] +0,3 [8 ] -0,1 C-17683 TOLERANCES: UNLESS OTHERWISE SPECIFIED FRACTIONS: #1/64 DECIMALS (.XX): #.01 DECIMALS (.XXX): #.005 TITLE ANGLES: USER FEED DIRECTION B 1208 SIDE VIEW CHIP LED RoHS COMPLIANT MATERIAL .039 REV DRAWING NUMBER ALL DIM'S IN: INCHES (MM) .061 #.002 [1,55 #0,05] +.004 -.000 +0,1 [1 ] -0 THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. - #1 $ FINISH: 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 - TAPE & REEL CONFIGURATION FSCM 83330 SHEET 1 OF 1 FAMILY TABLE: