CATALOG NO. VF (V) IF (mA) LED EPOXY COLOR LED CHIP TYP MAX TYP MAX 558-0101-001F 2.0 3.0 10 20 RED DIFF. GaAs 558-0102-001F 5.0 10 15 RED DIFF. 558-0201-001F 2.1 10 25 558-0202-001F 5.0 10 558-0301-001F 2.1 558-0302-001F 5.0 558-0401-001F 1.5 558-0501-001F 2.1 558-0601-001F PEAK WAVELENGTH (nm) LUMINOUS INTENSITY IF (mcd) REVERSE VOLTAGE VF (V) REV DIM "A" DIM "B" DIM "C" A B TYP MIN 650 3.6 10.0 3 .111 .391 .755 GaAsP/GaP 635 1.5 4.0 5 .101 .381 .828 GREEN DIFF. GaP 563 5.6 16.0 3 .111 .391 .755 15 GREEN DIFF. GaP 565 2.0 8.0 5 .101 .381 .828 10 20 YELLOW DIFF. GaAsP/GaP 585 2.2 6.3 3 .111 .391 .755 10 15 YELLOW DIFF. GaAsP/GaP 585 2.0 8.0 5 .101 .381 .828 2.2 10 25 ORANGE DIFF. GaAsP/GaP 600 3.0 6.5 5 .101 .381 .848 2.8 20 40 WATER CLEAR GaP 565 19.0 70.0 4 .101 .381 .828 1.9 2.4 20 50 WATER CLEAR AllnGaP 594 35.0 200.0 5 .101 .381 .902 558-0701-001F 1.8 2.4 20 40 WATER CLEAR AlGaAs 660 60.0 170.0 4 .101 .381 .828 558-1101-001F 1.7 2.2 2 7 RED DIFF. GaAsP/GaP 635 1.0 1.8 5 .101 .381 .878 558-1201-001F 1.8 2.7 2 7 YELLOW DIFF. GaAsP/GaP 585 1.0 1.6 5 .101 .381 .878 558-1301-001F 1.9 2.2 2 7 GREEN DIFF. GaP 565 1.0 1.6 5 .101 .381 .878 558-1501-001F 2.1 2.8 10 30 GREEN TINTED NON-DIFFUSED GaP 565 19.0 70.0 5 .101 .381 .828 558-1601-001F 2.1 2.8 10 20 YELLOW TINTED GaAsP/GaP NON-DIFFUSED 585 5.6 19.0 5 .101 .381 .828 558-1701-001F 1.8 2.4 20 40 RED TINTED NON-DIFFUSED AlGaAs 660 40.0 135.0 4 .101 .381 .828 558-1801-001F 1.8 2.4 20 40 RED DIFF. AlGaAs 660 19.0 60.0 4 .101 .381 .828 3.0 3.0 REVISIONS DRN CKD APP NEW RELEASE REMOVED WIRE AND PLATING CALLOUTS; ADDED RoHS COMPLIANT NOTE AND "REV" COLUMN TO REVISION BLOCK C ADDED DIM "A", "B", & "C" DATE TWC TC RP 8-30-05 TWC TC RP 9-8-05 AJF KLJ CJC 9-18-09 .190 [4.83] 3MM LED "A" #.015 "B" #.020 D 558-XXXXF MIN ECN NO HOUSING PRINT APPROPRIATE P/N AS SHOWN "C" MIN ANODE LEAD .040 [1.01] MIN .020 [.51] SQ. TYP NOM CATHODE LEAD .100 #.015 [2.54 #0.38] THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. SCALE: DRAWING SCALE RoHS Compliant 558-XX0X-001F Snap-in PMI NOTES: 1. *REQUIRES EXTERNAL RESISTOR. **REQUIRES EXTERNAL RESISTOR, MAX. FORWARD D.C. CURRENT 7mA. 2. RECOMMENDED MOUNTING HOLE: .155 - .158 DIA. ON PANELS .031 THRU .062 THICK. Part Numbers with the "F" suffix ending are RoHS Compliant. Example: 558-1501-001F The bag packaging is marked with "RoHS Compliant" label or equivalent markings. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. C-17286 TOLERANCES: UNLESS OTHERWISE SPECIFIED FRACTIONS: #1/64 DECIMALS (.XX): #.01 DECIMALS (.XXX): #.005 REV DRAWING NUMBER ALL DIM'S IN: INCHES (MM) TITLE C 3MM LED PMI, SNAP-IN RoHS COMPLIANT MATERIAL ANGLES: #1 $ FINISH: 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 FSCM 83330 SHEET 1 OF 1 FAMILY TABLE: