REV LED COLOR 597-3021-402F; -407F RED 597-3202-402F; -407F ORANGE 597-3312-402F; -407F GREEN 597-3325-402F; -407F InGaN GREEN 597-3612-402F; -407F BLUE RoHS COMPLIANT 597-3XXX-40XF Part Numbers with the "F" suffix ending are RoHS Compliant. For example: 597-3021-402F Reel and bag packaging are marked with "RoHS Compliant" label or equivalent markings. These parts can be used with RoHS reflow profile. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. LED COLOR LUMINOUS INTENSITY FORWARD VOLTAGE REVERSE @IF = 20 mA @IF = 20 mA CURRENT (10 mA FOR InGaN GREEN & BLUE) (10 mA FOR InGaN GREEN & BLUE) ( A) (mcd) (V) DOMINANT WAVELENGTH (nm) TYP MAX MAX MIN TYP MAX TYP TYP RED 150 330 1.9 2.4 100 620 626 632 635 60 ORANGE 150 330 1.9 2.4 100 600 605 609 609 60 GREEN 27 56 2.1 2.5 100 558 561 564 565 60 InGaN GREEN 150 680 3.3 3.8 100 525 522 50 BLUE 47 220 3.3 3.8 100 470 465 50 ABSOLUTE MAXIMUM RATINGS AT 25 C $ AMBIENT RED POWER DISSIPATION 78 FORWARD CURRENT PULSE FORWARD CURRENT (DUTY DERATE LINEARLY FROM 75 C $ < 1/20, PULSE WIDTH < 1ms) (FROM 60 C $ OR HIGHER FOR InGAN GREEN & BLUE) REVERSE VOLTAGE 30 30 30 20 20 mA 100 100 48 48 mA 1.0 1.0 1.0 0.96 0.96 mA/ $C 5 5 5 5 5 STORAGE TEMPERATURE -40 TO +120 OPERATING TEMPERATURE -40 TO +110 -40 TO +100 .059 [1,5] .118 [3] OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES 1 .157±.004 TYP. [4,00±0.1] .079 TYP. [2,00] 150 0 RECOMMNEDED RoHS SOLDER PROFILE V $C .024 [0,6] $C NOTES: 1. DIE: InGaN FOR P/Ns 597-3325-40XF & 597-3612-40XF AllnGaP FOR ALL OTHER P/Ns. 2. EPOXY COLOR: WATER CLEAR. 3. DIALIGHT PART NUMBERS: 597-3XXX-40XF. 4. ...-402F SUFFIX FOR 20 PCS ON A SAMPLE STRIP. 5. ...-407F SUFFIX FOR 7" [180mm] DIA. REEL, .315" [8mm] WIDE TAPE, PACKAGED 2,500 PCS PER REEL, CATHODE TOWARDS SPROCKET. 6. MOISTURE SENSITIVITY LEVEL: 4. 7. THESE COMPONENTS CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY, HANDLING AND STORAGE IN ACCORDANCE WITH IPC-A-610. .063 [1,6] LED SCHEMATIC 2 1 .059+.004 -.000 [1,5+0.1] -0 .069 #.004 [1,75 #0,1] .138 [3,50] THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. .173 #.002 [4,39 #0,05 ] SCALE: 20.000 .315 #.008 [8,00 #0,2] .063 #.002 [1,6 #0,05 ] 2 .067±.008 TYP. [1,7±0.2] CATHODE FEED DIRECTION TAPING SPECIFICATIONS .063 #.002 [1,6 #0,05 ] C-17266 TOLERANCES: UNLESS OTHERWISE SPECIFIED TITLE SCALE 15.000 B SMT LED, 1206 PKG. W/ LENS RoHS COMPLIANT MATERIAL ANGLES: REV DRAWING NUMBER ALL DIM'S IN: INCHES (MM) FRACTIONS: #1/64 DECIMALS (.XX): #.01 DECIMALS (.XXX): #.008 .157±.004 [4,00±0.1] TYP. 40s MAX .036 [0,9] .051 [1,3] .008 TYP. [0,2] NO 3-14-11 PRE-HEATING .071 [1,8] PIN 1 CATHODE PIN 2 180 120s PCB ATTENTION: DATE OPERATION HEATING 260 230 .079 [2,01] LED COLOR UNITS InGaN ORANGE GREEN BLUE GREEN 78 81 84 80 mW 100 1 2 C $ ~ MAX DRN CKD APP CATHODE MARK PEAK VIEWING WAVELENGTH ANGLE (nm) (DEG) MIN REVISIONS NEW RELEASE TWC ADDED P/Ns: 597-3021-402F,-407F; 597-3202-402F,-407F; 597-3312-402F,-407F; AJF KLJ & 597-3612-402F,-407F; REVISED NOTES. B LED CHIP LENS OPERATING CHARACTERISTICS AT 25 $C AMBIENT ECN NO A DEVICE SURFACE TEMPERATURE DIALIGHT PART NUMBER - #1 $ FINISH: 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 - RECOMMENDED SOLDER PAD LAYOUT FSCM 83330 SHEET 1 OF 1 FAMILY TABLE: