HCF4093YM013TR - STMicroelectronics

HCF4093
Quad 2-input NAND Schmitt trigger
Datasheet - production data
• ESD performance
– HBM: 2 kV
– MM: 200 V
– CDM: 1 kV
Applications
SO14
• Automotive
• Industrial
Features
• Computer
• Schmitt trigger action on each input with no
external components
• Consumer
• Hysteresis voltage typically 0.9 V at VDD = 5 V
and 2.3 V at VDD =10 V
• Noise immunity greater than 50 % of
VDD ( typ.)
• No limit on input rise and fall times
• Quiescent current specified up to 20 V
• Standardized symmetrical output
characteristics
• 5 V, 10 V, and 15 V parametric ratings
• Input leakage current II = 100 nA (max.) at
VDD = 18 V and TA = 25 ° C
Description
The HCF4093 is a monolithic integrated circuit
fabricated in metal oxide semiconductor
technology available in the SO14 package.
The HCF4093 consists of four Schmitt trigger
circuits. Each circuit function has a 2-input NAND
gate with Schmitt trigger action on both inputs.
The gate switches at different points for positive
and negative going signals. The difference
between the positive voltage (VP) and the
negative voltage (VN) is defined as hysteresis
voltage (VH).
• 100 % tested for quiescent current
Table 1. Device summary table
Order code
Temperature range
Package
HCF4093M013TR
-55 ° C to +125 ° C
SO14
HCF4093YM013TR (1)
-40 ° C to +125 ° C
SO14
(automotive grade)(1)
Packing
Marking
HCF4093
Tape and reel
HCF4093Y
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 & Q002 or equivalent.
January 2014
This is information on a product in full production.
DocID2068 Rev 4
1/13
www.st.com
Contents
HCF4093
Contents
1
Pin information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.1
SO14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2/13
DocID2068 Rev 4
HCF4093
1
Pin information
Pin information
Figure 1. Pin connections (top view)
$
9''
%
+
-
*
0
- $%
.
. &'
0 *+
/ ()
&
/
'
)
966
(
*$06&%
Table 2. Pin description
Pin no
Symbol
Name and function
1, 2, 5, 6, 8, 9, 12, 13
A, B, C, D, E, F, G, H
Data inputs
3, 4, 10, 11
J, K, L, M
Data outputs
7
VSS
Negative supply voltage
14
VDD
Positive supply voltage
DocID2068 Rev 4
3/13
13
Functional description
2
HCF4093
Functional description
Table 3. Truth table
Inputs
Outputs
A, C, E, G
B, D, F, H
J, K, L, M
L
L
H
L
H
H
H
L
H
H
H
L
Figure 2. Input equivalent circuit
9''
,1387
966
*$06&%
4/13
DocID2068 Rev 4
HCF4093
3
Electrical characteristics
Electrical characteristics
Stressing the device above the ratings listed in the “Absolute maximum ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
Table 4. Absolute maximum ratings (AMR)
Symbol
Parameter
Value
VDD
Supply voltage
-0.5 to +22
VI
DC input voltage
-0.5 to VDD + 0.5
II
DC input current
±10
Power dissipation per package
200
Power dissipation per output transistor
100
Top
Operating temperature
-55 to +125
Tstg
Storage temperature
-65 to +150
PD
Unit
V
mA
mW
°C
Table 5. Recommended operating conditions
Symbol
Parameter
Value
VDD
Supply voltage
3 to 20
VI
Input voltage
0 to VDD
Top
Operating temperature
-55 to 125
DocID2068 Rev 4
Unit
V
°C
5/13
13
Electrical characteristics
HCF4093
Table 6. DC specifications(1)
Test condition
Value
TA = 25 °C
Sym. Parameter
VI (V)
IL
VOH
VOL
VP
VN
Quiescent
current
High level
output
voltage
Low level
output
voltage
Positive
trigger
threshold
voltage
Negative
trigger
threshold
voltage
VO (V)
|IO| (μA) VDD(V)
6/13
Min.
Max.
0/10
10
0/15
15
0/20
20
0/5
5
4.95
4.95
4.95
10
9.95
9.95
9.95
0/15
15
14.95
14.95
14.95
5/0
5
0/10
<1
10/0
<1
15/0
a
b
a
b
0/5
0.02
0.04
10
Max.
1
30
30
2
60
60
4
120
120
20
600
600
0.05
0.05
μA
0.05
15
Hysteresis
voltage
Output
drive
current
Min.
5
b
IOH
Typ. Max.
-55 to 125 °C Unit
0/5
a
VH
Min.
-40 to 85 °C
2.5
4.6
0/10
9.5
0/15
13.5
5
2.2
2.9
3.6
2.2
3.6
2.2
3.6
10
4.6
5.9
7.1
4.6
7.1
4.6
7.1
15
6.8
8.8
10.8
6.8
10.8
6.8
10.8
5
2.6
3.3
4.0
2.6
4
2.6
4
10
5.6
7
8.2
5.6
8.2
5.6
8.2
15
6.3
9.4
12.7
6.3
12.7
6.3
12.7
5
0.9
1.9
2.8
0.9
2.8
0.9
2.8
10
2.5
3.9
5.2
2.5
5.2
2.5
5.2
15
4
5.8
7.4
4
7.4
4
7.4
5
1.4
2.3
3.2
1.4
3.2
1.4
3.2
10
3.4
5.1
6.6
3.4
6.6
3.4
6.6
15
4.8
7.3
9.6
4.8
9.6
4.8
9.6
5
0.3
0.9
1.6
0.3
1.6
0.3
1.6
10
1.2
2.3
3.4
1.2
3.4
1.2
3.4
15
1.6
3.5
5
1.6
5
1.6
5
5
0.3
0.9
1.6
0.3
1.6
0.3
1.6
10
1.2
2.3
3.4
1.2
3.4
1.2
3.4
15
1.6
3.5
5
1.6
5
1.6
5
-1.36
-3.2
-1.15
-1.1
-0.44
-1
-0.36
-0.36
10
-1.1
-2.6
-0.9
-0.9
15
-3.0
-6.8
-2.4
-2.4
5
<1
DocID2068 Rev 4
V
mA
HCF4093
Electrical characteristics
Table 6. DC specifications(1) (continued)
Test condition
Value
Sym. Parameter
IOL
Output sink
current
II
Input
leakage
current
CI
Input
capacitance
VI (V)
VO (V)
0/5
0.4
0/10
0.5
0/15
1.5
0/18
|IO| (μA) VDD(V)
<1
Any input
TA = 25 °C
Min.
Typ. Max.
-40 to 85 °C
-55 to 125 °C Unit
Min.
Min.
Max.
5
0.44
1
0.36
0.36
10
1.1
2.6
0.9
0.9
15
3.0
6.8
2.4
2.4
18
±10-5 ±0.1
Any input
5
±1
Max.
mA
±1
7.5
μA
pF
1. The noise margin for both level "1" and "0" is: 1 V min. with VDD = 5 V, 2 V min. with VDD = 10 V, and 2.5 V min. with
VDD = 15 V.
a: Input on terminals 1, 5, 8, 12 or 2, 6, 9, 13; other inputs to VDD.
b: Input on terminals 1 and 2, 5 and 6, 8 and 9, or 12 and 13; other inputs to VDD.
Table 7. Dynamic electrical characteristics
(Tamb = 25 °C, CL = 50 pF, RL = 200 kΩ, tr = tf = 20 ns)
Test condition
Symbol
tPLH, tPHL
tTLH, tTHL
Value(1)
Parameter
Propagation delay time
Output transition time
Unit
VDD (V)
Typ.
Max.
5
190
380
10
90
180
15
65
130
5
100
200
10
50
100
15
40
80
ns
1. The typical temperature coefficient for all VDD values is 0.3 %/°C.
DocID2068 Rev 4
7/13
13
Electrical characteristics
HCF4093
Figure 3. Test circuit
9''
3XOVHJHQHUDWRU
'87
966
57
&/
5/
*$06&%
1. Legend: CL = 50 pF or equivalent (includes jig and probe capacitance), RL = 200 KΩ, RT = ZOUT of pulse
generator (typically 50 Ω)
Figure 4. Propagation delay time waveform (f = 1 MHz; 50 % duty cycle)
QV
QV
9''
,1
287
966
W3+/
W3/+
W7+/
92+
92/
W7/+
*$06&%
8/13
DocID2068 Rev 4
HCF4093
4
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
DocID2068 Rev 4
9/13
13
Package information
4.1
HCF4093
SO14 package information
Figure 5. SO14 package mechanical drawing
/
*
F
&
$
D
E
H
D
6
H
E
(
'
0
)
*$06&%
Table 8. SO14 package mechanical data
Dimensions
Ref
Millimeters
Min.
Typ.
A
a1
Max.
Min.
Typ.
1.75
0.1
0.2
a2
10/13
Inches
Max.
0.068
0.003
0.007
1.65
0.064
b
0.35
0.46
0.013
0.018
b1
0.19
0.25
0.007
0.010
C
0.5
0.019
c1
45 °
45 °
D
8.55
8.75
0.336
0.344
E
5.8
6.2
0.228
0.244
e
1.27
0.050
e3
7.62
0.300
F
3.8
4.0
0.149
0.157
G
4.6
5.3
0.181
0.208
L
0.5
1.27
0.019
0.050
M
0.68
0.026
S
8°
8°
DocID2068 Rev 4
HCF4093
Package information
Figure 6. SO14 tape and reel information
1
&
'
$
7
3R
%R
3
$R
.R
*$06&%
1. Drawing is not to scale.
Table 9. SO14 tape and reel information
Dimensions
Ref
Millimeters
Min.
A
Typ.
Inches
Max.
Min.
330
Max.
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
13.2
Typ.
0.504
22.4
0.519
0.882
Ao
6.4
6.6
0.252
0.260
Bo
9
9.2
0.354
0.362
Ko
2.1
2.3
0.082
0.090
Po
3.9
4.1
0.153
0.161
P
7.9
8.1
0.311
0.319
DocID2068 Rev 4
11/13
13
Ordering information
5
HCF4093
Ordering information
Table 10. Order codes
Order code
Temperature range
Package
HCF4093M013TR
-55 ° C to +125 ° C
SO14
HCF4093YM013TR (1)
-40 ° C to +125 ° C
SO14
(automotive grade)(1)
Packing
Tape and
reel
Marking
HCF4093
HCF4093Y
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening
according to AEC Q001 & Q002 or equivalent.
6
Revision history
Table 11. Document revision history
Date
Revision
Sept-2001
1
Initial release.
16-Aug-2007
2
Document converted to new ST template, added Figure 6: SO14
tape and reel information on page 11 andTable 9: SO14 tape and
reel information on page 11, small text changes.
3
Document template and layout updated
Updated package names (PDIP-14 and SO-14 instead of DIP-14
and SOP-14).
Updated Features
Added Applications
Updated Device summary table
Small correction to inches min value of Ao in Table 9
Added Section 5: Ordering information
4
Removed PDIP14 package
Added ESD data to Features
Table 1: Device summary table: updated footnote 1.
Table 10: Order codes: updated footnote 1.
18-Feb-2013
13-Jan-2014
12/13
Changes
DocID2068 Rev 4
HCF4093
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
DocID2068 Rev 4
13/13
13