Technical Data Sheet

HCF40106
Hex Schmitt trigger
Datasheet - production data
Applications
 Automotive
 Industrial
SO-14
 Computer
 Consumer
Features
Description
 Schmitt trigger action with no external
components
The HCF40106 is a monolithic integrated circuit
fabricated in metal oxide semiconductor
technology available in an SO-14 package.
 Hysteresis voltage typically:
0.9 V at VDD = 5 V
2.3 V at VDD =10 V
3.5 V at VDD =15 V
 Noise immunity greater than 50%
 No limit on input rise and fall times
 Low VDD to VSS current during slow input ramp
 Standardized symmetrical output
characteristics
The HCF40106 consists of six Schmitt trigger
circuits. Each circuit functions as an inverter with
Schmitt trigger action on the input. The trigger
switches at different points for positive and
negative-going signals. The difference between
the positive voltage (VP) and the negative voltage
(VN) is defined as hysteresis voltage (VH).
 Quiescent current specified up to 20 V
 5 V, 10 V, and 15 V parametric ratings
 Input leakage current II = 100 nA (max.) at
VDD = 18 V and TA = 25 C
 100% tested for quiescent current
 ESD performance
– HBM: 2 kV
– MM: 200 V
– CDM: 1 kV
Table 1. Device summary table
Order code
Temperature range
Package
HCF40106M013TR
-55 ° C to +125 ° C
SO-14
HCF40106YM013TR(1)
-40 ° C to +125 ° C
SO-14
(automotive grade)(1)
Packing
Marking
HCF40106
Tape & reel
HCF40106Y
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 and Q002 or equivalent.
January 2014
This is information on a product in full production.
DocID002017 Rev 4
1/16
www.st.com
Contents
HCF40106
Contents
1
Pin information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4
Typical applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
DocID002017 Rev 4
HCF40106
1
Pin information
Pin information
Figure 1. Pin connections (top view)
$
9''
* $
)
%
/ )
+ %
(
&
. (
, &
'
966
- '
*$06&%
Table 2. Pin description
Pin no
Symbol
Name and function
1, 3, 5, 9, 11, 13
A, B, C, D, E, F
Data inputs
2, 4, 6, 8, 10, 12
G, H, I, J, K, L
Data outputs
7
VSS
Negative supply voltage
14
VDD
Positive supply voltage
DocID002017 Rev 4
3/16
16
Functional description
2
HCF40106
Functional description
Figure 2. Logic diagram
*
$
9''
966
*$06&%
1. All inputs protected by COS/MOS protection network.
Table 3. Truth table
Inputs (A to F)
Outputs (G to L)
L
H
H
L
Figure 3. Functional diagram
$
%
&
'
(
)
9'' 966 4/16
DocID002017 Rev 4
* $
+ %
, &
- '
. (
/ )
*$06&%
HCF40106
Functional description
Figure 4. Input equivalent circuit
9''
,1387
966
*$06&%
DocID002017 Rev 4
5/16
16
Electrical characteristics
3
HCF40106
Electrical characteristics
Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these conditions is not implied. All voltage values are referred to
VSS pin voltage.
Table 4. Absolute maximum ratings (AMR)
Symbol
Parameter
Value
VDD
Supply voltage
-0.5 to +22
VI
DC input voltage
-0.5 to VDD + 0.5
II
DC input current
10
Power dissipation per package
200
Power dissipation per output transistor
100
Top
Operating temperature
-55 to +125
Tstg
Storage temperature
-65 to +150
PD
Unit
V
mA
mW
°C
Table 5. Recommended operating conditions
6/16
Symbol
Parameter
Value
VDD
Supply voltage
3 to 20
VI
Input voltage
0 to VDD
Top
Operating temperature
-55 to 125
DocID002017 Rev 4
Unit
V
°C
HCF40106
Electrical characteristics
Table 6. DC specifications(1)
Test condition
Value
TA = 25 °C
Sym. Parameter
VI (V)
IL
VOH
VOL
VP
VN
VH
IOH
IOL
Quiescent
current
High level
output
voltage
Low level
output
voltage
VO (V)
|IO| (A) VDD(V)
Input
leakage
current
CI
Input
capacitance
Min.
Max.
0/10
10
0/15
15
0/20
20
0/5
5
4.95
4.95
4.95
10
9.95
9.95
9.95
0/15
15
14.95
14.95
14.95
5/0
5
0/10
<1
10/0
<1
15/0
0/5
0.02
0.04
10
1
30
30
2
60
60
4
120
120
20
600
600
0.05
0.05
A
0.05
2.5
4.6
5
2.2
2.9
3.6
2.2
3.6
2.2
3.6
10
4.6
5.9
7.1
4.6
7.1
4.6
7.1
15
6.8
8.8
10.8
6.8
10.8
6.8
10.8
5
0.9
1.9
2.8
0.9
2.8
0.9
2.8
10
2.5
3.9
5.2
2.5
5.2
2.5
5.2
15
4
5.8
7.4
4
7.4
4
7.4
5
0.3
0.9
1.6
0.3
1.6
0.3
1.6
10
1.2
2.3
3.4
1.2
3.4
1.2
3.4
15
1.6
3.5
5
1.6
5
1.6
5
-1.36
-3.2
-1.15
-1.1
-0.44
-1
-0.36
-0.36
5
0/10
9.5
10
-1.1
-2.6
-0.9
-0.9
0/15
13.5
15
-3.0
-6.8
-2.4
-2.4
0/5
0.4
5
0.44
1
0.36
0.36
0/10
0.5
10
1.1
2.6
0.9
0.9
0/15
1.5
15
3.0
6.8
2.4
2.4
0/18
Max.
15
Hysteresis
voltage
II
Min.
5
Negative
trigger
threshold
voltage
Output sink
current
Typ. Max.
-55 to 125 °C Unit
0/5
Positive
trigger
threshold
voltage
Output
drive
current
Min.
-40 to 85 °C
Any input
18
10-5 0.1
Any input
5
1
V
mA
mA
1
7.5
A
pF
1. The noise margin for both level "1" and "0" is: 1 V min. with VDD = 5 V, 2 V min. with VDD = 10 V, and 2.5 V min. with
VDD = 15 V.
DocID002017 Rev 4
7/16
16
Electrical characteristics
HCF40106
Table 7. Dynamic electrical characteristics
(Tamb = 25 °C, CL = 50 pF, RL = 200 k, tr = tf = 20 ns)
Test condition
Symbol
tPLH, tPHL
tTLH, tTHL
Value(1)
Parameter
Unit
Propagation delay time
Output transition time
VDD (V)
Typ.
Max.
5
140
280
10
70
140
15
60
120
5
100
200
10
50
100
15
40
80
ns
1. The typical temperature coefficient for all VDD values is 0.3 %/°C.
Figure 5. Test circuit
9''
3XOVHJHQHUDWRU
'87
57
966
&/
5/
*$06&%
1. Legend: CL = 50 pF or equivalent (includes jig and probe capacitance), RL = 200 KRT = ZOUT of pulse
generator (typically 50 )
8/16
DocID002017 Rev 4
HCF40106
Electrical characteristics
Figure 6. Propagation delay time waveform (f = 1 MHz; 50 % duty cycle)
QV
QV
9''
,1
287
966
W3+/
W3/+
92+
W7+/
92/
W7/+
*$06&%
DocID002017 Rev 4
9/16
16
Typical applications
4
HCF40106
Typical applications
Figure 7. Astable multivibrator
+&)
966
W$
9''
966
5
&
966
*$06&%
V DD – V N
V
t A = RC ln  ------P-  -----------------------V  V – V 
N
DD
P
50 k  R  1 m
100 pF  C  1 F
For the range of R and C given 2 s < tA < 0.4 s
Figure 8. Monostable multivibrator
9''
W0
9''
966
5
9''
&
966
+&)
+&)8
966
V DD 
t M = RC ln  ----------------------V – V 
DD
P
50 k  R  1 m
100 pF  C  1 F
For the range of R and C given 5 s < tM < 1s
10/16
DocID002017 Rev 4
*$06&%
HCF40106
Typical applications
Figure 9. Wave sharper
9''
966
9''
+&)
966
*$06&%
The frequency range of the wave shape is from DC to 1 MHz.
DocID002017 Rev 4
11/16
16
Package information
5
HCF40106
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
12/16
DocID002017 Rev 4
HCF40106
Package information
Figure 10. SO-14 package mechanical drawing
/
*
F
&
$
D
E
H
D
6
H
E
(
'
0
)
*$06&%
Table 8. SO-14 package mechanical data
Dimensions
Ref
Millimeters
Min.
Typ.
A
a1
Inches
Max.
Min.
Typ.
1.75
0.1
0.2
a2
Max.
0.068
0.003
0.007
1.65
0.064
b
0.35
0.46
0.013
0.018
b1
0.19
0.25
0.007
0.010
C
0.5
0.019
c1
45 
45 
D
8.55
8.75
0.336
0.344
E
5.8
6.2
0.228
0.244
e
1.27
0.050
e3
7.62
0.300
F
3.8
4.0
0.149
0.157
G
4.6
5.3
0.181
0.208
L
0.5
1.27
0.019
0.050
M
0.68
0.026
S
8
8
DocID002017 Rev 4
13/16
16
Package information
HCF40106
Figure 11. SO-14 tape and reel information
1
&
'
$
7
3R
%R
3
$R
.R
*$06&%
1. Drawing is not to scale.
Table 9. SO-14 tape and reel information
Dimensions
Ref
Millimeters
Min.
A
Max.
Min.
330
13.2
Typ.
Max.
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
14/16
Typ.
Inches
0.504
22.4
0.519
0.882
Ao
6.4
6.6
0.252
0.260
Bo
9
9.2
0.354
0.362
Ko
2.1
2.3
0.082
0.090
Po
3.9
4.1
0.153
0.161
P
7.9
8.1
0.311
0.319
DocID002017 Rev 4
HCF40106
6
Ordering information
Ordering information
Table 10. Order codes
Order code
Temperature range
Package
HCF40106M013TR
-55 ° C to +125 ° C
SO-14
HCF40106YM013TR(1)
-40 ° C to +125 ° C
SO-14
(automotive grade)(1)
Packing
Tape &
reel
Marking
HCF40106
HCF40106Y
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening
according to AEC Q001 and Q002 or equivalent.
7
Revision history
Table 11. Document revision history
Date
19-Feb-2013
06-Jan-2014
Revision
Changes
3
Document template and layout updated
Updated package names (PDIP-14 and SO-14 instead of DIP-14
and SOP-14)
Updated Features
Added Applications
Updated Device summary table
Removed “HCC” from Figure 7, Figure 8, and Figure 9
Added Section 6: Ordering information
4
Removed DIP package option
Added ESD performance to Features
Updated footnote 1 of Table 1: Device summary table
Updated footnote 1 of Table 10: Order codes
DocID002017 Rev 4
15/16
16
HCF40106
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
16/16
DocID002017 Rev 4