LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85C RWL @High ripple capability @For train systems and high power consuming inverter circuits @Endurance with ripple current : 20,000 hours at 85C @RoHS Compliant Longer life RWF ?SPECIFICATIONS Items Characteristics Category Temperature Range -25 to +85C Rated Voltage Range Capacitance Tolerance Leakage Current 350 to 450Vdc P20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) Dissipation Factor (tane) 0.25 max. Low Temperature Characteristics Capacitance change C(-25C)/C(+20C)]0.7 (at 20C, 120Hz) (at 20C after 5 minutes) (at 20C, 120Hz) (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MO. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated ripple current is applied 20,000 hours at 85C. Capacitance change [P30% of the initial value D.F. (tanE) [300% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 85C without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change [P20% of the initial value D.F. (tanE) [300% of the initial specified value Leakage current [The initial specified value Insulation Resistance Insulation Withstanding Voltage Endurance Shelf Life ?DIMENSIONS (Screw-Mount) [mm] @Mounting Clamp Code : B @Mounting Clamp Code : C 360° 3 AP1 WP1 45°P5° KP1 EP1 4.5 BP1 FP1 FD+1.8max. Sleeve (Pb-free PVC : Black) 6 30°P5° 8 J GP1 L+4max. Plastic disk fD 63.5 76.2 F63.5 : G=6 F76.2 & F89 : G=5 A B W F 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 fD 63.5 76.2 89 4.5 @Terminal Code : LG E K F J 38.1 43.5 28.0 14.0 44.5 50.0 31.5 14.0 50.8 56.5 31.5 16.0 <Screw specifications> Plus hexagon-headed screw: M5B0.8B10 Maximum screw tightening torque: 3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. ?PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RW L A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800MF:682, 12,000MF:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351, 400V:401) Series code Category Please refer to "Product code guide (screw-mount terminal type)" (1/2) CAT. No. E1001K LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85C ?STANDARD RATINGS WV (Vdc) 350 400 Cap (mF) Case size fDbL(mm) tane Rated ripple current (Arms/ 85c,120Hz) Part No. 3,300 3,900 4,700 4,700 5,600 5,600 6,800 6,800 8,200 10,000 12,000 2,700 3,300 3,900 3,900 4,700 4,700 63.5 B 115 63.5 B 130 63.5 B 155 76.2 B 115 63.5 B 170 76.2 B 130 63.5 B 190 76.2 B 155 76.2 B 170 89 B 155 89 B 190 63.5 B 115 63.5 B 130 63.5 B 155 76.2 B 115 63.5 B 170 76.2 B 130 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 11.1 12.8 15.2 14.7 17.3 16.9 20.0 20.2 23.1 26.6 32.0 10.1 11.7 13.8 14.7 15.8 15.5 ERWL351LGC332MDB5M ERWL351LGC392MDD0M ERWL351LGC472MDF5M ERWL351LGC472MEB5M ERWL351LGC562MDH0M ERWL351LGC562MED0M ERWL351LGC682MDK0M ERWL351LGC682MEF5M ERWL351LGC822MEH0M ERWL351LGC103MFF5M ERWL351LGC123MFK0M ERWL401LGC272MDB5M ERWL401LGC332MDD0M ERWL401LGC392MDF5M ERWL401LGC392MEB5M ERWL401LGC472MDH0M ERWL401LGC472MED0M WV (Vdc) 400 450 Cap (mF) Case size fDbL(mm) tane Rated ripple current (Arms/ 85c,120Hz) Part No. 5,600 5,600 6,800 8,200 10,000 2,200 2,700 2,700 3,300 3,300 3,900 4,700 5,600 5,600 6,800 8,200 63.5 B 190 76.2 B 155 76.2 B 170 89 B 155 89 B 190 63.5 B 115 63.5 B 130 76.2 B 115 63.5 B 155 76.2 B 130 63.5 B 170 76.2 B 155 76.2 B 190 89 B 155 89 B 170 89 B 190 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 18.2 18.3 21.0 24.1 29.1 9.10 10.6 11.2 12.7 13.0 14.4 16.7 20.1 19.9 23.0 26.4 ERWL401LGC562MDK0M ERWL401LGC562MEF5M ERWL401LGC682MEH0M ERWL401LGC822MFF5M ERWL401LGC103MFK0M ERWL451LGC222MDB5M ERWL451LGC272MDD0M ERWL451LGC272MEB5M ERWL451LGC332MDF5M ERWL451LGC332MED0M ERWL451LGC392MDH0M ERWL451LGC472MEF5M ERWL451LGC562MEK0M ERWL451LGC562MFF5M ERWL451LGC682MFH0M ERWL451LGC822MFK0M ?RATED RIPPLE CURRENT MULTIPLIERS @Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.1 1k 1.3 3k 1.4 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10C rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for RWL series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. (2/2) CAT. No. E1001K