LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 105℃ KMQ KMQ Series ・Endurance with ripple current : 2,000 hours at 105℃ ・Downsized and high ripple current from KMH series ・RoHS Compliant Downsized Higher ripple KMH P270 ◆SPECIFICATIONS Items Characteristics Category Temperature Range -25 to +105℃ Rated Voltage Range Capacitance Tolerance Leakage Current 315 to 450Vdc ±20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Dissipation Factor (tanδ) Shall not exceed the values shown in the STANDARD RATINGS Low Temperature Characteristics Capacitance change C(-25℃)/C(+20℃)≧0.7 (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MΩ. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Insulation Resistance Insulation Withstanding Voltage Endurance Shelf Life ◆DIMENSIONS (Screw-Mount) [mm] ● Mounting Clamp A±1 W±1 Vent 6 30°±5° ● Mounting Clamp 360° 3 8 J G±1 L+4max. Plastic disk φD 35 50 63.5 76.2 φ35 toφ63.5 : G=6 φ76.2 &φ89 : G=5 A 58.0 78.0 90.0 104.5 B 44.0 64.0 76.0 90.0 W 48.0 68.0 80.0 93.5 H 3.5 4.5 4.5 4.5 Code : C 45°±5° H B±1 F±1 φD+1.8max. Sleeve (Pb-free PVC : Brown) Code : B F 12.7 22.4 28.0 31.5 φD 50 63.5 76.2 89 4.5 Code : LG K±1 E±1 ● Terminal E 32.5 38.1 44.5 50.8 K 37.0 43.5 50.0 56.5 J 14.0 14.0 14.0 16.0 F 22.4 28.0 31.5 31.5 <Screw specifcations> Plus hexagon-headed screw :M5×0.8×10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMQ A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470µF:471, 1,800µF:182) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 268 CAT. No. E1001N LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 105℃ KMQSeries ◆STANDARD RATINGS WV (Vdc) 315 350 Cap (µF) Case size φD×L(mm) tanδ 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,900 5,600 6,800 8,200 35×55 35×65 35×75 35×80 35×100 50×70 50×75 50×90 50×100 63.5×85 63.5×96 76.2×85 76.2×96 76.2×110 89×100 89×115 35×55 35×60 35×70 35×80 35×90 50×65 50×75 50×85 50×100 63.5×85 76.2×80 76.2×105 76.2×125 89×115 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 Rated ripple current (Arms/105℃,120Hz) Part No. 2.4 2.9 3.3 3.8 4.5 5.4 6.0 7.2 8.4 9.9 11.3 13.1 15.0 17.6 17.2 20.1 2.2 2.5 2.9 3.4 4.0 4.6 5.5 6.4 7.6 9.0 11.7 15.6 18.6 18.2 EKMQ3B1LGB561MA55M EKMQ3B1LGB681MA65M EKMQ3B1LGB821MA75M EKMQ3B1LGB102MA80M EKMQ3B1LGB122MAA0M EKMQ3B1LGC152MC70M EKMQ3B1LGC182MC75M EKMQ3B1LGC222MC90M EKMQ3B1LGC272MCA0M EKMQ3B1LGC332MD85M EKMQ3B1LGC392MD96M EKMQ3B1LGC472ME85M EKMQ3B1LGC562ME96M EKMQ3B1LGC682MEB0M EKMQ3B1LGC822MFA0M EKMQ3B1LGC103MFB5M EKMQ351LGB471MA55M EKMQ351LGB561MA60M EKMQ351LGB681MA70M EKMQ351LGB821MA80M EKMQ351LGB102MA90M EKMQ351LGC122MC65M EKMQ351LGC152MC75M EKMQ351LGC182MC85M EKMQ351LGC222MCA0M EKMQ351LGC272MD85M EKMQ351LGC392ME80M EKMQ351LGC562MEA5M EKMQ351LGC682MEC5M EKMQ351LGC822MFB5M WV (Vdc) 400 450 Cap (µF) 390 470 560 680 820 1,000 1,200 1,500 2,200 3,300 4,700 5,600 6,800 8,200 330 390 470 560 680 820 1,000 1,200 1,500 2,200 3,300 4,700 5,600 5,600 6,800 8,200 Case size φD×L(mm) tanδ 35×55 35×60 35×70 35×80 35×90 50×65 50×75 50×85 63.5×85 63.5×105 76.2×105 89×96 89×115 89×130 35×55 35×65 35×75 35×80 35×100 35×110 50×80 50×90 50×105 63.5×96 63.5×130 76.2×130 76.2×155 89×120 89×140 89×170 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.10 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 Rated ripple current (Arms/105℃,120Hz) Part No. 2.0 2.3 2.7 3.1 3.6 4.2 4.9 5.8 8.1 10.8 14.3 13.9 16.6 19.2 1.8 2.2 2.5 2.8 3.5 4.1 4.6 5.3 6.4 8.5 11.9 15.7 18.5 15.3 18.0 21.6 EKMQ401LGB391MA55M EKMQ401LGB471MA60M EKMQ401LGB561MA70M EKMQ401LGB681MA80M EKMQ401LGB821MA90M EKMQ401LGC102MC65M EKMQ401LGC122MC75M EKMQ401LGC152MC85M EKMQ401LGC222MD85M EKMQ401LGC332MDA5M EKMQ401LGC472MEA5M EKMQ401LGC562MF96M EKMQ401LGC682MFB5M EKMQ401LGC822MFD0M EKMQ451LGB331MA55M EKMQ451LGB391MA65M EKMQ451LGB471MA75M EKMQ451LGB561MA80M EKMQ451LGB681MAA0M EKMQ451LGB821MAB0M EKMQ451LGC102MC80M EKMQ451LGC122MC90M EKMQ451LGC152MCA5M EKMQ451LGC222MD96M EKMQ451LGC332MDD0M EKMQ451LGC472MED0M EKMQ451LGC562MEF5M EKMQ451LGC562MFC0M EKMQ451LGC682MFE0M EKMQ451LGC822MFH0M ◆RATED RIPPLE CURRENT MULTIPLIERS ●Frequency Multipliers Frequency (Hz) φ35, 50 φ63.5 to 89 50 0.70 0.80 120 1.00 1.00 300 1.30 1.10 1k 1.70 1.15 3k 1.80 1.15 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 269 CAT. No. E1001N