CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead PSA @Super low ESR, high temperature resistance @Large capacitance & Improved high ripple current capability @Rated voltage range : 2.5 to 35Vdc @Endurance : 2,000 hours at 105C @Suitable for DC-DC converters, voltage regulators and decoupling applications For computer motherboards @RoHS Compliant Lower ESR PS ?SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105C Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note 2.5 to 35Vdc P20% (M) Rated voltageB1.15 I=0.2CV (Rated voltage 2.5 to 25Vdc) / I=0.5CV (Rated voltage 35Vdc) Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc) Dissipation Factor (tane) 0.12 max. Low Temperature Characteristics (Max. Impedance Ratio) Z(-25C)/Z(+20C)[1.15 Z(-55C)/Z(+20C)[1.25 Endurance Bias Humidity Test Surge Voltage Test Failure Rate (at 20C, 120Hz) (at 105C) (at 20C after 2 minutes) (at 20C, 120Hz) (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2,000 hours at 105C. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105C) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. ?DIMENSIONS [mm] ?MARKING @Terminal Code : E F0.6 FP0.5 EX) 4V820MF FD' Coated Case L' 15min. 4min. Size code fD fd F fD' L' (1/2) HB5 8 JC5 10 PS18M 820 4V 0.6 3.5 5.0 FD+0.5max. L+1.5max. CAT. No. E1001K CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead ?PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PS- AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 270MF:271, 1,500MF:152) Lead forming·Taping code Terminal code Voltage code (ex. 4V:4R0, 6.3V:6R3, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" ?STANDARD RATINGS WV(Vdc) 2.5 4 6.3 10 16 20 25 35 Cap(µF) 680 820 1500 560 820 1000 1200 390 470 680 820 1000 270 330 470 560 100 180 270 330 100 150 68 100 18 33 Case size fDbL(mm) ESR (momax/20c, 100k to 300kHz) Rated ripple current (mArms/105c, 100kHz) 8 B11.5 8 B11.5 10 B12.5 8 B11.5 10 B12.5 10 B12.5 10 B12.5 8 B11.5 8 B11.5 10 B12.5 10 B12.5 10 B12.5 8 B11.5 8 B11.5 10 B12.5 10 B12.5 8 B11.5 8 B11.5 10 B12.5 10 B12.5 8 B11.5 10 B12.5 8 B11.5 10 B12.5 8 B11.5 10 B12.5 10 10 8 10 8 8 8 12 12 10 10 10 14 14 12 12 16 16 14 14 24 20 24 20 34 30 5,230 5,230 5,500 5,230 5,500 5,500 5,500 4,770 4,770 5,500 5,500 5,500 4,420 4,420 5,300 5,300 4,360 4,360 5,050 5,050 3,320 4,320 3,320 4,320 2,830 3,270 Part No. APS-2R5ESS681MHB5S APS-2R5ESS821MHB5S APS-2R5ESS152MJC5S APS-4R0ESS561MHB5S APS-4R0ESS821MJC5S APS-4R0ESS102MJC5S APS-4R0ESS122MJC5S APS-6R3ESS391MHB5S APS-6R3ESS471MHB5S APS-6R3ESS681MJC5S APS-6R3ESS821MJC5S APS-6R3ESS102MJC5S APS-100ESS271MHB5S APS-100ESS331MHB5S APS-100ESS471MJC5S APS-100ESS561MJC5S APS-160ESS101MHB5S APS-160ESS181MHB5S APS-160ESS271MJC5S APS-160ESS331MJC5S APS-200ESS101MHB5S APS-200ESS151MJC5S APS-250ESS680MHB5S APS-250ESS101MJC5S APS-350ESS180MHB5S APS-350ESS330MJC5S SS : Enter the appropriate lead forming or taping code. (2/2) CAT. No. E1001K