SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS High heat resistance, 125℃ New! ●Endurance : 2,000 hours at 125℃ voltage range : 10 to 35V ●Nominal capacitance range : 47 to 470µF ●Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ●RoHS Compliant MHJ ●Rated Lower ESR MHB ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life -40 to +125℃ 10 to 35Vdc (20℃, 120Hz) ±20%(M) I=0.01CV Where, I : Max. leakage current (μA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage(Vdc) 10V 16V 25V 35V tanδ (Max.) (20℃, 120Hz) 0.30 0.23 0.18 0.16 Rated voltage(Vdc) 10V 16V 25V 35V Z(-25℃)/Z(+20℃) 3 2 2 2 4 3 3 3 (120Hz) Z(-40℃)/Z(+20℃) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value HA0 JA0 F80 ESR 20℃ 3.5 0.60 0.40 (Ωmax./100kHz) -40℃ 40 4.5 3.5 The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] ●Terminal ◆PART NUMBERING SYSTEM 1 Code : A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 W 18 0.3max. L±0.3 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470, 100µF:101) Taping code Terminal code Voltage code (ex. 16V:160, 35V:350) Series code Category P C±0.2 B±0.2 φD±0.5 17 E MH J A A A A D A A A A M A A A G A±0.2 Please refer to "Product code guide (surface mount type)" Size code F80 HA0 JA0 C B A L φD 6.3 7.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.9 3.1 4.5 ◆MARKING 10 16 25 35 Cap(µF) 220 330 330 470 100 100 220 330 470 100 220 330 47 47 100 220 Size code 5j HA0 HA0 JA0 JA0 F80 HA0 HA0 JA0 JA0 HA0 JA0 JA0 F80 HA0 HA0 JA0 ESR (Ωmax/100kHz) voltage symbol Rated voltage (Vdc) Symbol A 10 C 16 E 25 V 35 100 CHJ ◆STANDARD RATINGS WV(Vdc) ● Rated EX) 16V100µF 20℃ −40℃ Rated ripple current (mArms/125℃, 100kHz) 0.15 0.15 0.12 0.12 0.45 0.15 0.15 0.12 0.12 0.15 0.12 0.12 0.45 0.15 0.15 0.12 3.0 3.0 2.0 2.0 5.0 3.0 3.0 2.0 2.0 3.0 2.0 2.0 5.0 3.0 3.0 2.0 350 350 550 550 220 350 350 550 550 350 550 550 220 350 350 550 Part No. EMHJ100ADA221MHA0G EMHJ100ADA331MHA0G EMHJ100ADA331MJA0G EMHJ100ADA471MJA0G EMHJ160ADA101MF80G EMHJ160ADA101MHA0G EMHJ160ADA221MHA0G EMHJ160ADA331MJA0G EMHJ160ADA471MJA0G EMHJ250ADA101MHA0G EMHJ250ADA221MJA0G EMHJ250ADA331MJA0G EMHJ350ADA470MF80G EMHJ350ADA470MHA0G EMHJ350ADA101MHA0G EMHJ350ADA221MJA0G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (1/1) CAT. No. E1001L