SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 10000-hours-life, 105℃ MLF - Series ・Endurance : 10,000 hours at 105℃ ・Rated voltage range : 6.3 to 50V ・Nominal capacitance range : 1.0 to 1,000µF ・Suitable for high reliability products ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant MVL P91 Longer life MLE P88 Longer life MLF ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -25 to +105℃ 6.3 to 50Vdc ±20%(M) I=0.03CV or 4µA, whichever is greater Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 0.32 0.28 0.26 0.16 0.14 0.14 tanδ(Max.) 6.3V 10V 16V 25V 35V 50V Rated voltage(Vdc) 2 2 4 3 2 2 Z(-10℃)/Z(+20℃) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E ML F AAA A DA AAA M AAA G W Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C±0.2 B±0.2 φD±0.5 (at 20℃,120Hz) ◆PART NUMBERING SYSTEM Code : A Vent for JA0 0.3max. A±0.2 L±0.3 (Note) Note : L±0.5 for HA0 and JA0 Size code D73 E73 F73 F90 HA0 JA0 (at 20℃, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 10,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] ●Terminal (at 20℃,120Hz) C B A L D 7.0 4.3 4.3 5.1 4 7.0 5.3 5.3 5.9 5 6.3 7.0 6.6 6.6 7.2 6.3 8.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 3.1 4.5 Please refer to "Product code guide (surface mount type)" ◆MARKING EX) 16V47µF 4h 47 C LF ●Rated voltage symbol Rated voltage (Vdc) Symbol 6.3 j 10 A 16 C 25 E 35 V 50 H Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 86 CAT. No. E1001N SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 10000-hours-life, 105℃ MLFSeries - ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (µF) 22 47 100 220 330 1,000 33 220 10 22 47 100 470 33 47 100 Size code Rated ripple current (mArms/105℃, 120Hz) 22 36 60 101 160 313 35 141 18 30 50 81 254 48 63 116 D73 E73 F73 F90 HA0 JA0 E73 HA0 D73 E73 F73 F90 JA0 F73 F90 HA0 WV (Vdc) Part No. EMLF6R3ADA220MD73G EMLF6R3ADA470ME73G EMLF6R3ADA101MF73G EMLF6R3ADA221MF90G EMLF6R3ADA331MHA0G EMLF6R3ADA102MJA0G EMLF100ADA330ME73G EMLF100ADA221MHA0G EMLF160ADA100MD73G EMLF160ADA220ME73G EMLF160ADA470MF73G EMLF160ADA101MF90G EMLF160ADA471MJA0G EMLF250ADA330MF73G EMLF250ADA470MF90G EMLF250ADA101MHA0G 35 50 Cap (µF) 1.0 2.2 3.3 4.7 4.7 10 10 22 22 33 220 33 47 100 Size code Rated ripple current (mArms/105℃, 120Hz) Part No. D73 D73 D73 D73 E73 E73 F73 F73 F90 F90 JA0 HA0 HA0 JA0 6.2 11 14 15 19 25 30 42 49 57 216 77 92 151 EMLF350ADA1R0MD73G EMLF350ADA2R2MD73G EMLF350ADA3R3MD73G EMLF350ADA4R7MD73G EMLF350ADA4R7ME73G EMLF350ADA100ME73G EMLF350ADA100MF73G EMLF350ADA220MF73G EMLF350ADA220MF90G EMLF350ADA330MF90G EMLF350ADA221MJA0G EMLF500ADA330MHA0G EMLF500ADA470MHA0G EMLF500ADA101MJA0G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) Capacitance(μF) 1.0 2.2 to 10 22 to 1,000 120 1k 10k 100k 1.00 1.00 1.00 1.50 1.30 1.05 1.75 1.40 1.08 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 87 CAT. No. E1001N