CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount @Super low ESR, high ripple current capability @Longer life (5,000 hours at 105C) @Rated voltage range : 4 to 16Vdc, Capacitance : 22 to 560MF @Case size : F5B5.8L to F8B6.7L @Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards etc. @RoHS Compliant PXS Longer life PXA/PXE ?SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current -55 to +105C 4 to 16Vdc P20% (M) Rated voltageB1.15 I=0.2CV Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc) Dissipation Factor (tane) 0.12 max. Low Temperature Characteristics (Max. Impedance Ratio) Z(-25C)/Z(+20C)[1.15 Z(-55C)/Z(+20C)[1.25 (at 20C, 120Hz) (at 105C) (at 20C after 2 minutes) (at 20C, 120Hz) (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 5,000 hours at 105C. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to the DC rated voltage at 60C, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105C) Endurance Bias Humidity Surge Voltage Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. ?DIMENSIONS [mm] ?MARKING @Terminal Code : A EX) 6.3V390MF P CP0.2 BP0.2 FDP0.5 W 0.3max. LP0.3 2 3 4 5 6 fD 5.0 6.3 8.0 L 5.8 5.8 6.7 A 5.3 6.6 8.3 B 5.3 6.6 8.3 C 5.9 7.2 9.0 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 P 1.4 1.9 3.1 S69A 390 6.3V AP0.2 ?PART NUMBERING SYSTEM 1 Size Code E61 F61 H70 7 8 9 10 11 12 13 14 15 16 17 18 A PXS AAA A RA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47MF:470, 150MF:151) Taping code Terminal code Voltage code (ex. 6.3V:6R3, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" (1/2) CAT. No. E1001K CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount ?STANDARD RATINGS WV (Vdc) 4 6.3 10 16 Cap (mF) Size code ESR (momax/20c, 100k to 300kHz) Rated ripple current (mArms/105c, 100kHz) 150 560 47 100 120 220 390 33 68 120 150 22 39 39 68 82 120 E61 H70 E61 E61 F61 F61 H70 E61 E61 F61 H70 E61 E61 F61 F61 H70 H70 25 22 30 25 22 22 22 70 30 27 30 90 35 37 30 30 27 2,150 3,220 1,970 2,150 2,570 2,570 3,220 1,100 1,970 2,320 2,760 1,060 1,820 2,050 2,200 2,760 2,900 (2/2) Part No. APXS4R0ARA151ME61G APXS4R0ARA561MH70G APXS6R3ARA470ME61G APXS6R3ARA101ME61G APXS6R3ARA121MF61G APXS6R3ARA221MF61G APXS6R3ARA391MH70G APXS100ARA330ME61G APXS100ARA680ME61G APXS100ARA121MF61G APXS100ARA151MH70G APXS160ARA220ME61G APXS160ARA390ME61G APXS160ARA390MF61G APXS160ARA680MF61G APXS160ARA820MH70G APXS160ARA121MH70G CAT. No. E1001K