MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 5mm height, 85C SRM Downsized @5mm height @Endurance : 1,000 hours at 85C @Non solvent resistant type @RoHS Compliant SRE ?SPECIFICATIONS Items Characteristics Category Temperature Range -40 to +85C Rated Voltage Range Capacitance Tolerance Leakage Current 4 to 50Vdc P20% (M) (at 20C, 120Hz) I=0.01CV or 3MA, whichever is greater. Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C after 2 minutes) 4V 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 0.35 0.24 0.20 0.16 0.14 0.12 0.10 tanE (Max.) (at 20C, 120Hz) 4V 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 2 2 2 2 3 4 7 Z(-25C)/Z(+20C) 3 3 4 6 8 10 15 Z(-40C)/Z(+20C) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 1,000 hours at 85C. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 85C without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ?DIMENSIONS [mm] 6.3 5 4 fD fd 0.45 0.45 0.45 1.5 2.0 2.5 F fD' FD+0.5max. L' L+1.0max. FD' Fd Sleeve (PET : Black) FP0.5 @Terminal Code : E L' 15min. 4min. (F4 to F6.3) Gas escape end seal ?PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E SRE AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0MF:1R0,100MF:101) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" ?STANDARD RATINGS WV (Vdc) Cap (mF) Case size fDbL(mm) tane Rated ripple current (mArms/ 85c,120Hz) Part No. 4 33 10 22 47 100 33 4.7 10 22 47 3.3 4.7 33 4B5 4B5 4B5 5B5 6.3B5 5B5 4B5 4B5 5B5 6.3B5 4B5 4B5 6.3B5 0.35 0.24 0.24 0.24 0.24 0.20 0.16 0.16 0.16 0.16 0.14 0.14 0.14 23 12 23 38 60 35 10 17 32 50 9.3 12 45 ESRE4R0ESS330MD05D ESRE6R3ESS100MD05D ESRE6R3ESS220MD05D ESRE6R3ESS470ME05D ESRE6R3ESS101MF05D ESRE100ESS330ME05D ESRE160ESS4R7MD05D ESRE160ESS100MD05D ESRE160ESS220ME05D ESRE160ESS470MF05D ESRE250ESS3R3MD05D ESRE250ESS4R7MD05D ESRE250ESS330MF05D 6.3 10 16 25 WV (Vdc) 35 50 Cap (mF) Case size fDbL(mm) tane Rated ripple current (mArms/ 85c,120Hz) Part No. 2.2 3.3 4.7 10 22 1.0 2.2 3.3 4.7 10 4B5 4B5 4B5 5B5 6.3B5 4B5 4B5 4B5 5B5 6.3B5 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 8.3 11 15 25 40 6.2 10 14 19 29 ESRE350ESS2R2MD05D ESRE350ESS3R3MD05D ESRE350ESS4R7MD05D ESRE350ESS100ME05D ESRE350ESS220MF05D ESRE500ESS1R0MD05D ESRE500ESS2R2MD05D ESRE500ESS3R3MD05D ESRE500ESS4R7ME05D ESRE500ESS100MF05D SS : Enter the appropriate lead forming or taping code. Note : unified to F4B5. (1/1) CAT. No. E1001K