SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Bi-polar, 105℃ MVK-BP - Series ・Bi-polar chip type for the circuit, of which polarity is frequently reversed ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -40 to +105℃ 6.3 to 50Vdc ±20% (M) (at 20℃, 120Hz) I=0.05CV or 10µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 0.35 0.26 0.24 0.20 0.18 0.18 tanδ (Max.) (at 20℃, 120Hz) 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 4 3 2 2 2 2 Z(-25℃)/Z(+20℃) 10 8 6 4 3 3 Z(-40℃)/Z(+20℃) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 1,000 hours at 105℃, however the polarization shall be reversed every 250 hours. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦The initial specified value Leakage current ◆DIMENSIONS [mm] Code : A ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 W L±0.3 Size code D 4 D60 5 E60 6.3 F60 L 5.7 5.7 5.7 A 4.3 5.3 6.6 B 4.3 5.3 6.6 C 5.1 5.9 7.2 10 11 12 13 14 15 16 ◆MARKING 17 EX) 35V4.7µF 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,10µF:100) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category P C±0.2 0.3max. 9 B MV K AAA A DA AAA M AAA G B±0.2 A±0.2 φD±0.5 ● Terminal W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.0 1.4 1.9 94K 4.7 35V Please refer to "Product code guide (surface mount type)" ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 Cap (µF) 10 22 47 33 4.7 10 22 3.3 2.2 4.7 10 1.0 2.2 3.3 4.7 Size code tanδ Rated ripple current (mArms/105℃,120Hz) D60 E60 F60 F60 D60 E60 F60 D60 D60 E60 F60 D60 E60 E60 F60 0.35 0.35 0.35 0.26 0.24 0.24 0.24 0.20 0.18 0.18 0.18 0.18 0.18 0.18 0.18 14 25 39 35 12 20 32 10 8.8 15 23 5.5 10 13 16 Part No. BMVK6R3ADA100MD60G BMVK6R3ADA220ME60G BMVK6R3ADA470MF60G BMVK100ADA330MF60G BMVK160ADA4R7MD60G BMVK160ADA100ME60G BMVK160ADA220MF60G BMVK250ADA3R3MD60G BMVK350ADA2R2MD60G BMVK350ADA4R7ME60G BMVK350ADA100MF60G BMVK500ADA1R0MD60G BMVK500ADA2R2ME60G BMVK500ADA3R3ME60G BMVK500ADA4R7MF60G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 104 CAT. No. E1001N