AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS. SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: DATE: AGM2464B SERIES NOV. 10, 2006 AGM2464B SERIES GRAPHIC MODULE VER1.1 REVISION RECORD REVISION VER1.1 REVISION DATE 15/6-2006 AZ DISPLAYS, INC. PAGE CONTENTS MODIFY THE COVER,ADD CONTENT AND REVISION RECORD. 11/10/06 1 AGM2464B SERIES GRAPHIC MODULE VER1.1 CONTENTS 1.0 MECHANICAL DIAGRAM 2.0 MECHANICAL SPECS 3.0 ABSOLUTE MAXIMUM RATINGS 4.0 ELECTRICAL CHARACTERISTICS 5.0 OPTICAL CHARACTERISTICS 6.0 BLOCK DIAGRAM 7.0 PIN ASSIGNMENT 8.0 APPLICATION 9.0 TIMING CHARACTERISTICS 10.0 RELIABILITY TEST 11.0 DISPLAY CONTROL INSTRUCTION AZ DISPLAYS, INC. 11/10/06 2 AGM2464B SERIES GRAPHIC MODULE VER1.1 MECHANICAL DIAGRAM AZ DISPLAYS, INC. 1.0 AZ DISPLAYS, INC. 11/10/06 3 AGM2464B SERIES GRAPHIC MODULE VER1.1 2.0 MECHANICAL SPECS 1. Overall Module Size 180.0mm(W) x 65.0mm(H) x max 14.5mm(D) for LED backlight version 180.0mm(W) x 65.0mm(H) x max 10.5mm(D) for reflective version 2. Dot Size 0.49mm(W) x 0.49mm(H) 3. Dot Pitch 0.53mm(W) x 0.53mm(H) 4. Duty 1/64 5. Controller IC T6963C 6. LC Fluid Options STN, FSTN 7. Polarizer Options Reflective, Transflective, Transmissive 8. Backlight Options LED 9. Temperature Range Options Standard (0ºC ~ 50ºC), Wide (-20ºC ~ 70ºC) 3.0 ABSOLUTE MAXIMUM RATINGS Item Symbol Min Typ Max Unit Operating temperature (Standard) Top 0 - 50 ºC Storage temperature (Standard) Tst -10 - 60 ºC Operating temperature (Wide temperature) Top -20 - 70 ºC Storage temperature (Wide temperature) Tst -30 - 80 ºC Input voltage Vin -0.3 - Vdd+0.3 V Vdd- Vss -0.3 - 7.0 V 12.5 33 V Supply voltage for logic Supply voltage for LCD drive Vdd- Vo 4.0 ELECTRICAL CHARACTERISTICS Item Symbol Condition Min Typ Max Unit Input voltage (high) Vih H level Vdd-2.2 - Vdd V Input voltage (low) Vil L level 0 - 0.8 V 0ºC 12.5 13.0 - 25ºC 12.3 12.8 - 50ºC 12.0 12.5 - -20ºC 13.0 13.3 - 0ºC 12.5 13.0 - 50ºC 12.0 12.5 - 70ºC 11.5 12.0 - Idd Vdd=5.0V - 10 16.0 mA VA-VK - 2.0 2.3 5.0 V Ifled RL=0? - 200 400 mA VA-VK - 2.0 2.3 5.0 V Ifled RL=1.25? - 660 1300 mA Recommended LC Driving Voltage (Standard Temp) Recommended LC Driving Voltage (Wide Temp) Power Supply Current A(Enable for White BL) LED Power Supply Current A(Enable for Green BL) LED Power Supply Current Vdd - Vo Vdd -Vo 5.0 OPTICAL CHARACTERISTICS AZ DISPLAYS, INC. 11/10/06 V V 4 AGM2464B SERIES GRAPHIC MODULE VER1.1 Item Mode R S Cr (Contrast Ratio) ? (Viewing Angle) ? (Viewing Angle) 25ºC 25ºC 25ºC MIN. TYP. MIN TYP. MIN TYP. A 2.8 3.05 80? 85? - 35? B 7.10 7.70 80? 85? - 35? C - - - - - - A 2.49 2.99 80? 85? - 35? B 7.05 7.55 80? 85? - 35? C - - - - - - Note: R: Reflective S: Transflective A: STN Gray B: STN Yellow C: FSTN At: ? =0?, ? =0? Item Symbol Condition Min Typ Max Unit Response time (rise) Tr 25 ºC - 150 250 ms Response time (fall) Tf 25ºC - 150 250 ms 6.0 BLOCK DIAGRAM DC/DC C1 0086 BIAS C64 S1 - S80 S81 - S160 S160 - S240 0086 0086 0086 LED Backlight T6963 AZ DISPLAYS, INC. 11/10/06 5 AGM2464B SERIES GRAPHIC MODULE VER1.1 7.0 PIN ASSIGNMENT Pin No. Symbol Function Level 1 FGND Frame Ground - 2 VSS Ground - 3 VDD +5V - 4 VADJ 5 /WR Contrast Adjust Voltage - H: Data read L L: Data write 8.0 6 /RD Enable signal L 7 /CE Chip Enable L 8 C/D Command/Data L/H 9 VLCD Power supply for LCD driving - 10 /RES Reset H/L 11 DB0 Data bit 0 H/L 12 DB1 Data bit 1 H/L 13 DB2 Data bit 2 H/L 14 DB3 Data bit 3 H/L 15 DB4 Data bit 4 H/L 16 DB5 Data bit 5 H/L 17 DB6 Data bit 6 H/L 18 DB7 Data bit 7 H/L 19 FS Font Select H/L 20 EBL (or nc if use A,K) Enable for BL 2~5.0V APPLICATION D0-D7 P0 P2 WR RD RST AZ DISPLAYS, INC. DECODE CS# AGM2464B 51 SERIES MCU C/D P3.0 VDD WR# RD# VADJ RST# VLCD 20K 11/10/06 6 AGM2464B SERIES GRAPHIC MODULE VER1.1 9.0 TIMING CHARACTERISTICS Tah C/D Tcyc Taw Tcc RD# WR# Tds Tdh Data Write Tacc Toh Data Read ITEM Address Setup Time Address Hold Time RD#,WR# Cycle RD#,WR# Pulse Width Data Setup Time Data Hold Time (Write) Data Access Time Data Hold Time (Read) SYMBLE Taw Tah Tcyc Tcc Tds Tdh Tacc Toh MIN 10 10 200 80 80 40 10 MAX UNIT ns ns ns ns ns ns ns ns 150 50 10.0 RELIABILITY TEST Evaluations and Assessment* Storage Condition Operation at high temperature and humidity High temperature storage Low temperature storage Content Current Consumption Oozing Contrast Other Appearances 40ºC,90% RH,240hrs Twice initial value or less none More than 80% of initial value No abnormality 60ºC, 240hrs -20ºC, 240hrs Twice initial value or less Twice initial value or less none More than 80% of initial value No abnormality More than 80% of initial value No abnormality *Evaluations and assessment to be made two hours after returning to room temperature (25ºC±5ºC). *The LCDs subjected to the test must not have dew condensation. AZ DISPLAYS, INC. 11/10/06 7 AGM2464B SERIES GRAPHIC MODULE VER1.1 11.0 DISPLAY CONTROL INSTRUCTION The display control instructions control the internal state of the T6963c. COMMAND Control State CD RD WR Code D7 D6 D5 D4 D3 D2 D1 D0 DESCRIPTION N2 N1 N0 0 0 1 Set Cursor Pointer 0 1 0 Set Offset Register 1 0 0 Set address Pointer N1 N0 0 0 Set Text Home Address 1 1 Set Text Area 2 0 Set Graphic Home Address 1 1 Set Graphic Area CG=0: Internal CG ROM Mode CG=1: Internal CG ROM Mode N2 N1 N0 Graphic & Text 0 0 0 OR Mode 0 0 1 Exor Mode 0 1 1 And Mode 1 0 0 Text Attribute Mode N3=0: Display Off N3=1: Display On N2=0:Text Off N2=1: Text On N1=0: Cursor Off N1=1: Cursor On N0=0: Blink Off N0=1: Blink On N2,N1,N0 Line Number of Cursor N2 N1 N0 0 0 0 1-Line Cursor (Bottom Line) 1 1 1 8-Line Cursor (8x8Dots) N1 N0 0 0 Data Auto Write 0 1 Data Auto Read 1 * Auto Reset N2=0: ADP Variable N2=1: ADP Nonvariable N1=0: Increment ADP N1 =1: Decrement ADP N0=0: Data Write N0=1: Data Read REGISTERS SETTIBG 1 1 0 0 0 1 0 0 N2 N1 N0 SET CONTROL WORD 1 1 0 0 1 0 0 0 0 N1 N0 MODE SET 1 1 0 1 0 0 0 C G N2 N1 N0 DISPLAY MODE 1 1 0 1 0 0 1 N3 N2 N1 N0 CURSOR PATTERN SELECT 1 1 0 1 0 1 0 0 N2 N1 N0 DATA AUTO READ/WRITE 1 1 0 1 0 1 1 0 0 N1 N0 DATA READ/WRITE 1 1 0 1 1 0 0 0 N2 N1 N0 1 1 0 1 1 1 0 0 0 0 0 Screan Peek 1 1 0 1 1 1 0 1 0 0 0 Screen Copy SCREEN PEEK SCREEN COPY BIT SET/RESET 1 1 0 DATA WRITE 0 1 0 AZ DISPLAYS, INC. 1 1 1 1 N3 Write Data N2 N1 N0 N3=0: Bit Reset N3=1: Bit Set N2, N1, N0 Bit Address 000-D0, 111-D7 Writes data DB0~DB7 into display data RAM. After writing 11/10/06 8 AGM2464B SERIES GRAPHIC MODULE VER1.1 DATA READ 0 0 AZ DISPLAYS, INC. 1 Read Data Reads data DB0~DB7 from display data RAM to the data bus. 11/10/06 9