MODEL NO.: G150X1 –L01

Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
TFT LCD Approval Specification
MODEL NO.: G150X1 –L01
Customer :
Approved by :
Note :
FOR MORE INFORMATION:
AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA 92656
Http://www.AZDISPLAYS.com
記錄
工作
審核
角色
投票
2007-02-14
13:21:40 CST
Approve by Dept.
Mgr.(QA RA)
tomy_chen(陳永一
/52720/54140/43150)
Department
Manager(QA RA)
Accept
2007-02-12
08:45:50 CST
Approve by
Director
teren_lin(林添仁
/56910/36064)
Director
Accept
1 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
- CONTENTS REVISION HISTORY
-------------------------------------------------------
3
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
-------------------------------------------------------
4
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
-------------------------------------------------------
6
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
-------------------------------------------------------
8
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
-------------------------------------------------------
11
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 COLOR DATA INPUT ASSIGNMENT
-------------------------------------------------------
12
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
-------------------------------------------------------
15
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
-------------------------------------------------------
18
8. PRECAUTIONS
8.1 HANDLING PRECAUTIONS
8.2 STORAGE PRECAUTIONS
8.3 OPERATION PRECAUTIONS
-------------------------------------------------------
22
9. PACKAGING
9.1 PACKING SPECIFICATIONS
9.2 PACKING METHOD
-------------------------------------------------------
23
10. DEFINITION OF LABELS
-------------------------------------------------------
25
11. MODULE DRAWING
-------------------------------------------------------
26
2 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
REVISION HISTORY
Version
Date
Ver 2.0
Ver 2.1
May 23,’ 06
Jun 22,’06
Ver 2.2
Feb 8,’07
Page
(New)
Section
All
4
6
7
6
All
1.2
2.1
2.2.2
2.1
Description
Approval Specification was first issued.
Added RoHS compliance
Added note 6
Lamp current 8.5mA
Modify data format / Delete RH-T diagram
3 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
1. GENERAL DESCRIPTION
1.1 OVERVIEW
G150X1-L01 is a 15.0” TFT Liquid Crystal Display module with 2 CCFL Backlight units and 20 pins LVDS
interface. This module supports 1024 x 768 XGA mode and can display 16.2M colors.
The PSWG is to establish a set of displays with standard mechanical dimensions and select electrical
interface requirements for an industry standard 15.0” XGA LCD panel and the inverter module for Backlight
is not built in.
1.2 FEATURES
- XGA (1024 x 768 pixels) resolution
- DE (Data Enable) only mode
- LVDS Interface with 1pixel/clock
- PSWG (Panel Standardization Working Group)
- Wide operating temperature.
- RoHS compliance
1.3 APPLICATION
-TFT LCD Monitor
-TFT LCD TV
- Factory Application
- Amusement
- Vehicle
1.4 GENERAL SPECIFICATI0NS
Item
Active Area
Bezel Opening Area
Driver Element
Pixel Number
Pixel Pitch
Pixel Arrangement
Display Colors
Display Mode
Surface Treatment
Specification
304.128 (H) x 228.096(V) (15.0” diagonal)
307.4(H) x 231.3(V)
a-Si TFT active matrix
1024 x R.G.B x 768
0.297(H) x 0.297(W)
RGB vertical Stripe
16,194,277
Normally White
Hard Coating (3H), Anti-Glare ( Haze 25)
Unit
mm
mm
pixel
mm
color
-
Note
(1)
-
4 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
1.5 MECHANICAL SPECIFICATIONS
Item
Horizontal(H)
Module Size
Vertical(V)
Depth(D)
Weight
Min.
326.0
253.0
-
Typ.
326.5
253.5
-
Max.
327.0
254.0
14.35
1100
Unit
mm
mm
mm
g
Note
(1)
(1)(2)
-
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) The depth is without connector.
+/- 0.5mm
5 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Storage Temperature
Operating Ambient Temperature
Test Item
High Temperature Storage Test
Low Temperature Storage Test
Thermal Shock Storage Test
High Temperature Operation Test
Low Temperature Operation Test
High Temperature & High Humidity
Operation Test
Heat Cycle Operation Test
ESD Test (Operation)
Shock (Non-Operating)
Vibration (Non-Operating)
Value
Symbol
Min.
-40
-30
TST
TOP
Max.
80
70
Unit
Note
ºC
ºC
(0), (1)
(0), (1), (2)
Test Condition
80ºC, 240 hours
-40ºC, 240 hours
-40ºC, 0.5hour←→80℃, 0.5hour; 100cycles, 1hour/cycle
70ºC, 240 hours
-30ºC, 240 hours
Note
(1), (2)
60ºC, RH 90%, 240hours
-30ºC, 1hour←→70ºC, 1hour; 50cycles, 4hour/cycle
150pF, 330Ω, 1sec/cycle
Condition 1 : panel contact, ±8KV
Condition 2 : panel non-contact ±15KV
50G, 11ms, half sine wave, 1 time for ± X, ± Y, ± Z direction
1.5G, 10 ~ 500 Hz sine wave, 1.5mm Max, 30min/cycle, 1
cycles each X, Y, Z direction
(2)
(2), (3)
(2), (3)
Note (0) All test conditions are as above table.
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta ≤ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation of water.
Note (2) No display malfunctions.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
Note (4) Temperature of panel display surface area should be 80 ºC Max.
6 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item
Power Supply Voltage
Symbol
VDD
Value
Min.
-0.3
Max.
4.0
Unit
Note
V
2.2.2 BACKLIGHT UNIT
Item
Lamp Voltage
Lamp Current
Lamp Frequency
Symbol
VL
IL
FL
Value
Min.
40
Max.
2.5K
8.5
80
Unit
Note
VRMS
mARMS
KHz
(1), (2), IL = 8 mA
(1), (2)
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) Specified values are for lamp (Refer to Section 3.2 for further information).
7 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE(1)
Parameter
Symbol
Power Supply Voltage
Ripple Voltage
Rush Current
VDD
VRP
IRUSH
White
Power Supply Current
Black
Differential Input Voltage for “H” Level
LVDS Receiver Threshold
“L” Level
Terminating Resistor
lcc
VIH
VIL
RT
Value
Typ.
3.3
500
750
100
Min.
3.0
-100
Max.
3.6
100
2.0
100
-
Unit
Note
V
mVp-p
A
mA
mA
mV
mV
Ohm
(2)
(3)a
(3)b
-
Note (1) The module should be always operated within above ranges.
Note (2) Measurement Conditions:
+3.3V
Q1
2SK1475
VDD
C3
FUSE
(LCD Module Input)
1uF
R1
47K
(High to Low)
(Control Signal)
Q2
R2
2SK1470
SW
1K
+12V
VR1
47K
C2
C1
0.01uF
1uF
+3.3V
0.9 VDD
0.1 VDD
GND
470μs
8 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
Note (3) The specified power supply current is under the conditions at VDD =3.3V, Ta = 25 ± 2 ºC, DC
Current and fv = 60 Hz, whereas a power dissipation check pattern below is displayed.
b. Black Pattern
a. White Pattern
Active Area
Active Area
9 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
Ta = 25 ± 2 ºC
3.2 BACKLIGHT UNIT
Parameter
Symbol
Lamp Input Voltage
Lamp Current
VL
IL
Lamp Turn On Voltage
VS
Operating Frequency
Lamp Life Time
Power Consumption
FL
LBL
PL
Value
Typ.
580
8
----4.64
Min.
522
2
--40
50000
4.18
Max.
638
8.5
1400 ( 0℃)
1210 (25℃)
80
-5.1
Unit
Note
VRMS
mARMS
VRMS
VRMS
KHz
Hrs
W
IL = 8.0 mA
(1)
(2)
(2)
(3)
(5)
(4), IL = 8.0 mA
Note (1) Lamp current is measured by utilizing a high frequency current meter as shown below:
HV (Pink/ Blue)
1
Inverter
LV (White/ Black)
3
LCD
Module
A
Current Meter
HV (Pink/ Blue)
1
Inverter
LV (White/ Black)
3
A
Current Meter
Note (2) The voltage that must be larger than Vs should be applied to the lamp for more than 1 second
after startup. Otherwise, the lamp may not be turned on normally.
Note (3) The lamp frequency may generate interference with horizontal synchronous frequency from the
display, and this may cause line flow on the display. In order to avoid interference, the lamp
frequency should be detached from the horizontal synchronous frequency and its harmonics as far
as possible.
Note (4) PL = IL X VL
Note (5) The lifetime of lamp is defined as the time when it continues to operate under the conditions at Ta
= 25 ±2 oC and IL =8.0mARMS until one of the following events occurs:
(a) When the brightness becomes ≤ 50% of its original value.
(b) When the effective ignition length becomes ≤ 80% of its original value. (Effective ignition length
is defined as an area that the brightness is less than 70% compared to the center point.)
Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the
inverter must have specifications for the modularized lamp. The performance of the Backlight,
such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for
the lamp. All the parameters of an inverter should be carefully designed to avoid generating too
much current leakage from high voltage output of the inverter. When designing or ordering the
inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the
inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module
should be operated in the same manners when it is installed in your instrument.
10 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
The output of the inverter must have symmetrical (negative and positive) voltage waveform and
symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter
which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may
produce interface with horizontal synchronous frequency and as a result this may cause beat on the
display. Therefore lamp frequency shall be as away possible from the horizontal synchronous
frequency and from its harmonics in order to prevent interference.
Requirements for a system inverter design, which is intended to have a better display performance, a
better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its
leakage current.
a. The asymmetry rate of the inverter waveform should be 10% below;
b. The distortion rate of the waveform should be within √2 ± 10%;
c. The ideal sine wave form shall be symmetric in positive and negative polarities
* Asymmetry rate:
Ip
| I p – I –p | / Irms * 100%
* Distortion rate
I -p
I p (or I –p) / Irms
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
DC
POWER
SUPPLY
INPUT CONNECTOR
INPUT
(TBD)
LVDS
INPUT
TIMING
CONTROLLER
SCAN DRIVER IC
LVDS
TFT LCD PANEL
(1024x3x768)
DATA DRIVER IC
DC/DC CONVERTER &
REFERENCE VOLTAGE
GENERATOR
LAMP CONNECTOR
(JST BHR-03VS-1)
BACKLIGHT UNIT
11 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
4.2 BACKLIGHT UNIT
1 HV (Pink)
3 LV (White)
1 HV (Pink)
3 LV (White)
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Symbol
VDD
VDD
GND
GND
RX0RX0+
GND
RX1RX1+
GND
RX2RX2+
GND
RXCLKRXCLK+
GND
RX3RX3+
GND
NC
Function
Power Supply +3.3V(typical)
Power Supply +3.3V(typical)
Ground
Ground
LVDS Differential Data Input
LVDS Differential Data Input
Ground
LVDS Differential Data Input
LVDS Differential Data Input
Ground
LVDS Differential Data Input
LVDS Differential Data Input
Ground
LVDS Differential Data Input
LVDS Differential Data Input
Ground
LVDS Differential Data Input
LVDS Differential Data Input
Ground
tied to ground
Polarity
Note
Negative
Positive
Negative
Positive
Negative
Positive
Negative
Positive
Negative
Positive
12 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
(1)Connector Part No.: [Hirose] DF14H-20P-1.25H
(2)Matching socket Part No.: [Hirose] DF14-20S-1.25C
5.2 BACKLIGHT UNIT
Pin
1
3
Symbol
HV
LV
Description
High Voltage
Ground
Color
Pink/ Blue
White/ Black
Note (1) Connector Part No.: BHR-03VS-1 (JST) or equivalent
Note (2) Matching Connector Part No.: TBD or equivalent
13 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
5.3 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for
the color. The higher the binary input the brighter the color. The table below provides the assignment of
color versus data input.
Color
Data Signal
Green
Red
Blue
R7 R6 R5 R4 R3 R2 R1 R0 R7 R6 G5 G4 G3 G2 G1 G0 R7 R6 B5 B4 B3 B2 B1 B0
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Black
Red
Green
Blue
Cyan
Magenta
Yellow
White
Red(0) / Dark
Red(1)
Red(2)
:
:
Red(252)
Red(252)
Red(252)
Green(0)/Dark
Green(1)
Green(2)
:
:
Green(252)
Green(252)
Green(252)
Blue(0) / Dark
Blue(1)
Blue(2)
:
:
Blue(252)
Blue(252)
Blue(252)
0
1
0
0
0
1
1
1
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
1
0
0
0
1
1
1
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
1
0
0
0
1
1
1
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
1
0
0
0
1
1
1
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
1
0
0
0
1
1
1
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
1
0
0
0
1
1
1
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
1
0
0
0
1
1
1
0
0
1
:
:
0
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
1
0
0
0
1
1
1
0
1
0
:
:
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
0
1
0
1
0
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
1
0
1
0
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
1
0
1
0
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
1
0
1
0
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
1
0
1
0
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
1
0
1
0
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
1
0
1
0
1
1
0
0
0
:
:
0
0
0
0
0
1
:
:
0
1
1
0
0
0
:
:
0
0
0
0
0
1
0
1
0
1
1
0
0
0
:
:
0
0
0
0
1
0
:
:
1
0
1
0
0
0
:
:
0
0
0
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
0
1
:
:
0
1
1
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
1
0
:
:
1
0
1
Note (1) 0: Low Level Voltage, 1: High Level Voltage
14 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal
DCLK
DE
Item
Pixel Clock
Vertical Total Time
Vertical Address Time
Horizontal Total Time
Horizontal Address Time
Symbol
1/TC
TV
TVD
TH
THD
Min.
780
768
1140
1024
Typ.
65
806
768
1344
1024
Max.
80
1200
768
1600
1024
Unit
MHz
TH
TH
TC
TC
Note
-
Note (1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be set
to low logic level or ground. Otherwise, this module would operate abnormally.
INPUT SIGNAL TIMING DIAGRAM
Tv
TVD
DE
TH
DCLK
TC
THD
DE
DATA
15 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
TIMING DIAGRAM of LVDS
T
TxCLK OUT
RxCK IN
Rx IN3
T/7
RxOUT10
RxOUT5
RxOUT27
G07
G06
R07
R06
RxOUT22
RxOUT21
RxOUT20
GND
B05
B04
B03
RxOUT14
RxOUT13
RxOUT12
RxOUT9
B00
G05
G04
G03
RxOUT7
RxOUT6
RxOUT4
RxOUT3
RxOUT2
G00
R05
RxOUT23
RESERVED
Rx IN2
RxOUT26
DE
Rx IN1
RxOUT18
B01
Rx IN0
RxOUT17
B07
RxOUT25
GND
RxOUT15
RxOUT16
B06
RxOUT24
R04
RxOUT11
R03
R02
G02
RxOUT1
R01
RxOUT19
B02
RxOUT8
G01
RxOUT0
R00
16 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
6.2 POWER ON/OFF SEQUENCE
Power Off
Power On
90%
- Power Supply
for LCD, VDD
0V
90%
t4
10%
10%
t3
Valid Data
0V
t5
- Power for Lamp
10%
t1
t2
- Interface Signal
(LVDS Signal of
Transmitter), VI
Restart
OFF
t6
ON
OFF
Timing Specifications:
0.5 < t1 ≦ 10 msec
0 < t2 ≦ 50 msec
0 < t3 ≦ 50 msec
t4 ≧ 500 msec
t5 ≧ 200 msec
t6 ≧ 200 msec
Note (1) Please avoid floating state of interface signal at invalid period.
Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD VDD to 0 V.
Note (3) The Backlight inverter power must be turned on after the power supply for the logic and the
interface signal is valid. The Backlight inverter power must be turned off before the power supply
for the logic and the interface signal is invalid.
17 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item
Ambient Temperature
Ambient Humidity
Supply Voltage
Input Signal
Inverter Current
Inverter Operating Frequency
Inverter
Symbol
Value
Unit
o
Ta
C
25±2
Ha
%RH
50±10
VDD
3.3
V
According to typical value in "3. ELECTRICAL CHARACTERISTICS"
IL
8.0
mA
FL
51
KHz
SUMIDA H05 5052
The measurement methods of optical characteristics are shown in Section 7.2. The following items
should be measured under the test conditions described in Section 7.1 and stable environment shown in
Note (4).
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 7.2. The
following items should be measured under the test conditions described in 7.1 and stable
environment shown in Note (6).
Item
Red
Color
Chromaticity
Green
Blue
White
Symbol
Rx
Condition
Min.
Ry
Gx
Gy
Bx
By
Wx
Wy
θx=0°, θY =0°
CS-1000T
Typ 0.03
Typ.
0.613
0.344
0.302
Max.
0.567
0.144
0.102
Typ+
0.03
LC
400
450
Contrast Ratio
CR
480
700
-
8
17
1.25
--70
70
70
70
--80
80
80
80
White Variation
TR
TF
δW
Cross Talk
CT
Horizontal
Viewing Angle
Vertical
θx+
θxθY+
θY-
Note
(1), (6)
0.313
0.329
Center Luminance of White
Response Time
Unit
θx=0°, θY =0°
θx=0°, θY =0°
BM-5A
CR ≧ 10
BM-5A
cd/m2 (4), (6)
13
22
1.4
5.0
(2), (6)
(3)
ms
-
(6), (7)
%
(5), (6)
Deg.
(1),(6),
(8)
18 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
Note (1) Definition of Viewing Angle (θx, θy):
Normal
θx = θy = 0º
θyθX- = 90º
θy+
12 o’clock direction
xθx-
6 o’clock
y+
θy+ = 90º
θx+
y-
x+
θy- = 90º
θX+ = 90º
Note (2) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L255 / L0
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (1)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (5).
Note (3) Definition of Response Time (TR, TF):
Gray Level 255
Gray Level 255
100%
90%
Optical
Response
Gray Level 0
10%
0%
Time
TF
TR
66.67m
66.67ms
19 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
Note (4) Definition of Luminance of White (LC):
Measure the luminance of gray level 255 at center point
LC = L (5)
L (x) is corresponding to the luminance of the point X at Figure in Note (7).
Note (5) Definition of Cross Talk (CT):
CT = | YB – YA | / YA × 100 (%)
Where:
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
(0, 0)
Active Area
(0, 0)
Active Area
YA, U (D/2,W/8)
YB, U (D/2,W/8)
(D/4,W/4)
YA, L (D/8,W/2)
YB, L (D/8,W/2)
Gray 128
YA, R (7D/8,W/2)
YB, R (7D/8,W/2)
Gray 0
(3D/4,3W/4)
YA, D (D/2,7W/8)
YB, D (D/2,7W/8)
Gray 128
(D,W)
(D,W)
Note (6) Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.
LCD Module
LCD Panel
Center of the Screen
BM-5A
CA-1000T
Field of View = 2º
Light Shield Room
500 mm
(Ambient Luminance < 2 lux)
20 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
Note (7) Definition of luminance measured points:
Measure the luminance of gray level 255 at point L(1)
Definition of White Variation (δW):
Measure the luminance of gray level 255 at 9 points
δW =
Maximum [L (1), L (6), L (7), L (8), L (9), L (10), L (11), L (12), L (13)]
Minimum [L (1), L (6), L (7), L (8), L (9), L (10), L (11), L (12), L (13)]
Horizontal Line
D
D/10
Vertical Line
W/10
W/2
D/2
6
W/4
W
D/4
3D/4
8
7
2
3
1
9
9D/10
10
X
: Test Point
X=1 to 13
3W/4
9W/10
5
4
11
12
13
Active Area
Note (8) TN type has Gray scale inversion occurs at θy- = 40º
21 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
8. PRECAUTIONS
8.1 HANDLING PRECAUTIONS
(1) The module should be assembled into the system firmly by using every mounting hole. Be careful not
to twist or bend the module.
(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause
electrical short or damage the polarizer.
(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and
assembly process.
(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is
very soft and easily scratched.
(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not use
Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might
permanently damage the polarizer due to chemical reaction.
(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for
a long time.
(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap.
(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.
(9) Do not disassemble the module.
(10) Do not pull or fold the lamp wire.
(11) Pins of I/F connector should not be touched directly with bare hands.
8.2 STORAGE PRECAUTIONS
(1) High temperature or humidity may reduce the performance of module. Please store LCD module within
the specified storage conditions.
(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may
damage LCD module when it is operating.
(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the
response time will become slowly, and the starting voltage of lamp will be higher than the room
temperature.
8.3 OPERATION PRECAUTIONS
(1) Do not pull the I/F connector in or out while the module is operating.
(2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This
can prevent the CMOS LSI chips from damage during latch-up.
The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while assembling with
inverter. Do not disassemble the module or insert anything into the Backlight unit.
22 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
9. PACKAGING
9.1 PACKING SPECIFICATIONS
(1) 10 LCD modules / 1 Box
(2) Box dimensions : 511(L) X 420(W) X 360(H) mm
(3) Weight : approximately 12.7Kg ( 10 modules per box)
Figures 9-1
23 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
9.2 PACKING Method
Figures 9-2
24 / 27
Version 2.2
Doc No.: 14066727
Issued Date: Feb. 8, 2007
Model No.: G150X1-L01
Approval
10. DEFINITION OF LABELS
10.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following
explanation.
G150X1 -L01
CHI MEI
Rev. XX
XXXXXXXYMDLNNNN
E207943
MADE IN TAIWAN
OPTOELECTRONICS
(a) Model Name: G150X1 –L01
(b) Revision: Rev. XX, for example: C1, C2 …etc.
(c) Serial ID: X X X X X X X Y M D L N N N N
Serial No.
Product Line
Year, Month, Date
CMO Internal Use
Color Filter
Revision
CMO Internal Use
Serial ID includes the information as below:
(a) Manufactured Date: Year: 1~9, for 2000~2009
Month: 1~9, A~C, for Jan. ~ Dec.
Day: 1~9, A~Y, for 1st to 31st, exclude I and O
(b) Revision Code: cover all the change
(c) Color Filter: 0 ->CMO, 2 -> Toppan
(d) Serial No.: Manufacturing sequence of product
(e) Product Line: 1 -> Line1, 2 -> Line 2, …etc.
25 / 27
Version 2.2