GENERAL PURPOSE 1 FORM A SOLID STATE RELAY 6PIN DIP TYPE FORM A SSR LED Anode LED Cathode No Connection MOSFET Drain MOSFET Source 1 2 3 4, 6 5 Features • Normally open signal pole signal throw relay • Low operating current • 60 to 600V output withstand voltage • Low on resistance • Wide operating temperature range of -40°C to 85°C • High isolation voltage between input and output (Viso=5000 Vrms ) • UL 1577 approved (No. E214129) • UL 508 approved (No. E348721) • VDE approved (No. 40028391) • SEMKO approved • NEMKO approved • DEMKO approved • FIMKO approved • CQC approved Description The EL606A, EL625A, EL640A and EL660A are solid state relays containing an AlGaAs infrared LEDs on the light emitting side (input side) optically coupled to a high voltage output detector circuit. The detector consists of a photovoltaic diode array and MOSFETs on the output side. They can enable AC/DC and DC only output connections. The single channel configuration is equivalent to 1 form A EMR. They are packaged in 6 pin DIP and available in surface mount SMD option. Applications • Exchange equipment • Measurement equipment • FA/OA equipment 1 • Industrial controls • Security Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V Absolute Maximum Ratings (TA=25oC, unless otherwise specified) Rating Parameter Symbol Unit EL606A Forward Current EL625A EL640A EL660A IF 50 mA VR 5 V IFP 1 A Power Dissipation Pin 75 mW Break Down Voltage VL 60 250 400 600 V IL 550 180 120 50 mA Pulse Load Current* ILPeak 1.2 0.5 0.3 0.15 A Power Dissipation Pout 500 mW PT 550 mW Isolation Voltage* Viso 5000 Vrms Storage Temperature TSTG -40 to 125 o TOPR -40 to 85 o TSOL 260 o Input Reverse Voltage Peak Forward Current* Continuous Load Output Current 2 Total Power Dissipation 3 Operating Temperature 4 Soldering Temperature* 1 C C C Notes: *1. f =100Hz, Duty Cycle = 0.1% *2. A connection: 100ms (1 shot), VL = DC *3. AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2, 3 are shorted together, and pins 4, 5, 6 are shorted together. *4. For 10 seconds 2 Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V Electro-Optical Characteristics (TA=25℃) Parameter Input Output Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 10mA - 1.18 1.5 V Reverse Current IR VR = 5V IF = 0mA, VL = Max. - - 1 μA - - 1 μA - 0.75 2.5 - 6.5 15 - 20 30 - 42 70 0.4 1 3 5 14 20 EL660A 30 50 EL606A 0.2 0.5 1.5 3 7 15 15 30 - 85 - - 60 - - 45 - Off State leakage Current Ileak EL606A On Resistance* EL625A EL640A Rd(ON) A IF = 5mA, IL = Max. t = 1s EL660A EL606A On Resistance* On Resistance* EL625A EL640A EL625A EL640A Rd(ON) B Rd(ON) C IF = 5mA, IL = Max. t = 1s IF = 5mA, IL = Max. t = 1s EL660A EL606A Output EL625A Capacitance EL640A Cout VL = 0V, f = 1MHz EL660A Transfer LED turn on Current IF(on) Characteristics LED turn off current IF(off) Turn On Time EL640A Turn Off Time EL625A EL640A - - 1.5 3 mA IL = Max. 0.4 1.5 - mA - 1.3 3 - 1 3 - 0.35 3 - 1 3 - 0.1 0.5 0.1 0.5 0.1 0.5 0.1 0.5 Toff EL660A 3 pF 30 IF = 10 mA, IL = Max. RL = 200Ω , EL606A Ω - Ton EL660A Ω IL = Max. EL606A EL625A Ω Isolation Resistance RI-O V I-O = 500V DC Isolation Capacitance CI-O V = 0V, f = 1MHz 5×10 - Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 10 ms ms - - Ω 1.5 - pF www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V Turn on/Turn off Time Note: * On resistance test Connection A Connection B Connection C 4 Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V Typical Electro-Optical Characteristics Curves 5 Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V 6 Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V 7 Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V Order Information Part Number EL6XXA(Y)(Z)-V Note: XX = Part No. (06, 25, 40 or 60) Y = Lead form option (S, S1, M or none) Z = Tape and reel option (TA, TB, TU, TD or none). V = VDE safety approved option 8 Option Description Packing quantity None Standard DIP-6 65 units per tube M Wide lead bend (0.4 inch spacing) 65 units per tube S (TA) Surface mount lead form + TA tape & reel option 1000 units per reel S (TB) Surface mount lead form + TB tape & reel option 1000 units per reel S1 (TA) Surface mount lead form (low profile) + TA tape & reel option 1000 units per reel S1 (TB) Surface mount lead form (low profile) + TB tape & reel option 1000 units per reel Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V Package Dimension Standard DIP Type Option M Type 9 Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V Option S Type Option S1 Type 10 Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V Recommended pad layout for surface mount leadform Device Marking EL 640A YWWV Notes EL 640A Y WW V 11 denotes Everlight denotes Part Number denotes 1 digit Year code denotes 2 digit Week code denotes VDE option Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V Tape & Reel Packing Specifications Option TB Option TA Direction of feed from reel Direction of feed from reel Tape Dimensions 12 Dimension No. A B Do D1 E F Dimension (mm) 10.4±0.1 7.5±0.1 1.5±0.1 1.5+0.1/-0 1.75±0.1 7.5±0.1 Dimension No. Po P1 P2 t W K Dimension (mm) 4.0±0.15 12±0.1 2.0±0.1 0.35±0.03 16.0±0.2 4.5±0.1 Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V Precautions for Use 1. Soldering Condition 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile Note: Reference: IPC/JEDEC J-STD-020D Preheat Temperature min (Tsmin) 150 °C Temperature max (Tsmax) 200°C Time (Tsmin to Tsmax) (ts) Average ramp-up rate (Tsmax to Tp) 60-120 seconds 3 °C/second max Other Liquidus Temperature (TL) 217 °C Time above Liquidus Temperature (t L) 60-100 sec Peak Temperature (TP) 260°C Time within 5 °C of Actual Peak Temperature: T P - 5°C 30 s Ramp- Down Rate from Peak Temperature 6°C /second max. Time 25°C to peak temperature Reflow times 8 minutes max. 3 times . 13 Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com DATASHEET 6 Pin DIP TYPE 1 Form A Controls Load Voltage 60 to 600V Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 14 Copyright © 2010, Everlight All Rights Reserved. Release Date : August 16, 2013. Issue No: DPC-0000227 www.everlight.com