Top view LEDs 45-21UMC/XXXXXXX/TR8 Features ․Top View White LEDs ․Lead frame package with individual 2 pins ․Wide viewing angle ․Soldering methods: IR reflow soldering Pb-free ․The product itself will remain within RoHS compliant version. Applications ․LCD back light ․Mobile phones ․Indicators. ․Illuminations. ․Switch lights. 1 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Device Selection Guide Chip Materials InGaN 2 Emitted Color Resin Color White Yellowish Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 45-21UMC/XXXXXXX/TR8 45-21 - UM C - 1 XX XX XX X 2 3 4 5 - T R 8 6 7 8 The product name is designated as below: 1. Product type 2. C.I.E Range Code Of Group 3. Iv Range Code Of Group 4. Forward Voltage Spec. Setup 5. Test Of Electric Current 6. Package Quantity 7. Packing method 8. Forming types ℃) Absolute Maximum Ratings (Ta=25℃ Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Power Dissipation Pd 110 mW Operating Temperature Topr Storage Temperature Tstg Soldering Temperature Tsol ℃ -40 ~ +90 ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. -40 ~ +85 Electro-Optical Characteristics (Ta=25℃ ℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 1200 ----- 2200 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Forward Voltage VF 2.8 ---- 3.55 V IF=20mA Reverse Current IR ----- ----- 50 µA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 mcd IF =20mA Note: Tolerance of Luminous Intensity: ±11% 4 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Bin Range of Forward Voltage Note: Tolerance of Forward Voltage: ± 0.05V 5 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Bin Range of Chromaticity Coordinates Block (IF=20mA) 6 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Bin Range of Chromaticity Coordinates Block (IF=20mA) 7 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Bin Range of Chromaticity Coordinates Block (IF=20mA) 8 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 The C.I.E. 1931 Chromaticity Diagram 9 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Chromaticity Coordinates of Bin Code 10 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Chromaticity Coordinates of Bin Code 11 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Typical Electro-Optical Characteristics Curves 12 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 13 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm 14 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm Precautions for Use 1. Soldering Condition 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile 300 ℃ ℃ ℃ ℃ 200 Temperature( ) ℃ ℃ max. 260 245 255 240 217 250 max. 30s 150 max. 100s max. 120s 100 50 max. Ramp Up 3 ℃ /s max. Ramp Down 6 ℃ /s 0 0 50 100 150 200 250 300 Times(s) (B)ecommend soldering pad Note: Tolerances unless mentioned ±0.1mm. Unit = mm 15 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com DATASHEET SMD REFLECTOR 45-21UMC/XXXXXXX/TR8 2. Current limiting A resistor should be used to limit current spikes that can be caused by voltage fluctuations. Otherwise damage could occur. 3. Storage 3.1 Moisture proof bag should only be opened immediately prior to usage. 3.2 Environment should be less than 30 and 60% RH when moisture proof bag is opened. ℃ 3.3 After opening the package MSL Conditions stated on page 1 of this spec should not be exceeded. 3.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component should be baked at min. 60deg +/-5deg for 24 hours. 4. Iron Soldering Hand soldering is not recommended for regular production. These guidelines are for rework only. Soldering iron tip should contact each terminal no more than 3 sec at 350 , using soldering iron with nominal power less than 25W. Allow ℃ min. 2 sec. between soldering intervals. 5. Usage Do not exceed the values given in this specification. Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 16 Copyright © 2010, Everlight All Rights Reserved. Release Date : May.01.2013. Issue No: DSE-0000098 www.everlight.com