WG19264E Graphic 192x128 dots P2.54*19=48.26 13.6Max 9.0 2.5 75.0 12.11 3.5 4.75 10.75 NEW 20-Ø1.0PTH 20-Ø2.0PAD 1 40.28(AA) 62.5±0.5 55.5 55.0 43.0(VA) 32.25 20 192*64 Dots View Direction View Direction 1.6 75.0 4-Ø3.2PTH 14.54 120.92(AA) 13.25 123.5(VA) 8.0 134.0 3.5 143.0 LED B/L 0.63 0.59 NO. Symbol Function 1 VSS Ground 2 VDD Supply voltage for logic 3 VO Operating voltage for LCD 4 RS H: DATA, L: Instruction code 5 R/W H/L read/write signal 6 E enable signal Item Standard Value Unit Module Dimension 150.0x62.5x13.6MAX mm Viewing Area 123.5x43.0 mm Dot Pitch 0.63x0.63 Dot Size 0.59x0.59 mm mm Standard Value Item Symbol Power Supply VDD-VSS Input Voltage VI 7 DB0 data bus line 8 DB1 data bus line 9 DB2 data bus line 10 DB3 data bus line 11 DB4 data bus line 12 DB5 data bus line Item Symbol 13 DB6 data bus line 14 DB7 data bus line Input Voltage Supply Current VDD IDD 15 /CS1 Select Column 1~ Column 64 16 /RST Reset signal Recommended LC Driving Voltage for Normal Temp. Version module VDD-VO 17 /CS2 Select Column 65~ Column 128 18 /CS3 Select Column 129~ Column 192 19 20 VEE Negative Voltage output LED(+5) max. Unit min. typ. 4.5 5.0 5.5 V -0.3 --- VDD+0.3 V Note: VSS=0 Volt , VDD=5.0 Volt . LED Forward Voltage LED Forward Current EL Power Supply Current A DOT SIZE SCALE 10/1 Graphic type 1.192*64 DOTS 2. NO controller 3. 1/64 duty 4. +5.0V power supply Pin 0.59 0.63 150.0±0.5 Condition VDD=5V -20ºC -0ºC 25ºC 50ºC VF IF IEF 70ºC 25ºC 25ºC Vel=110VAC;400Hz Standard Value min. typ. max. Unit 0.7VDD --- VDD V --- 100 105 mA 28 30 25 ------22.5 23.0 23.5 V ------20.0 20.6 21.2 3.4 3.5 3.6 V 108 128 200 mA ----- mA --- 102