FTZ30E Diodes ESD Protection diode FTZ30E zApplications Voltage regulation (Common anode dual chips) zLand size figure(Unit : mm) zDimensions (Unit : mm) r 㧗 Each lead has same dimension ޓ㧙ฦ࠼ߣ߽หኸᴺ zFeatures 1) Small mold type. (SMD5) 2) High reliability 㪇㪅㪋㪌 㪇㪅㪊㪌 㪇㪅㪊㪌 㪇㪅㪋㪌 㪇㪅㪍 㧗 㧙 r r ޓޓޓ 㪉㪅㪋 㪈㪅㪇㪤㪠㪥㪅 㪇㪅㪏㪤㪠㪥㪅 㪇㪅㪐㪌 㪇㪅㪐㪌 㨪 zConstruction Silicon epitaxial planer r r 㨪 㪪㪤㪛㪌 㪈㪅㪐 zStructure 㩷 r re 㪩㪦㪟㪤㩷㪑㩷㪪㪤㪛㪌 㪡㪜㪠㪫㪘㩷㪑㩷㪪㪚㪄㪎㪋㪘 㫎㪼㪼㫂㩷㪺㫆㪻㪼 zTaping dimensions (Unit : mm) 㱢㪈㪅㪌㫧㪇㪅㪈 䇭䇭䇭䇭䇭㩷㩷㪇 㪉㪅㪇㫧㪇㪅㪇㪌 㪇㪅㪊㫧㪇㪅㪈 㪊㪅㪉㫧㪇㪅㪈 㪌㪅㪌㫧㪇㪅㪉 㪊㪅㪌㫧㪇㪅㪇㪌 Limits 200 150 -55 to +150 㪇䌾㪇㪅㪌 㪊㪅㪉㫧㪇㪅㪈 zAbsolute maximum ratings (Ta=25qC) Parameter Symbol Power dissipation (*1) P Junction temperature Tj Storage temperature Tstg 㱢㪈㪅㪇㪤㪠㪥 㪋㪅㪇㫧㪇㪅㪈 㪊㪅㪉㫧㪇㪅㪈 㪏㪅㪇㫧㪇㪅㪉 㪈㪅㪎㪌㫧㪇㪅㪈 㪋㪅㪇㫧㪇㪅㪈 㪈㪅㪊㪌㫧㪇㪅㪈 Unit mW 㷄 㷄 (*1) Total of 4 elements zElectrical characteristic (Ta=25qC, Rating of per diode) Parameter Symbol VZ Min. 29.19 Typ. - Max. 30.09 Unit V 㪠㪩 - - 0.5 μA ZZ Operating resistance +Zener voltage is measured with 40m current supply. 200 㱅 Zener voltage Reverse current Conditions IZ=5mA VR=23V Iz=5mA 1/2 FTZ30E Diodes 㪈㪇㪇 㪈㪇 㪈 㪇㪅㪈 㪇㪅㪇㪈 㪫㪸㪔㪎㪌㷄 㪈 㪫㪸㪔㪉㪌㷄 㪇㪅㪈 㪇㪅㪇㪈 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪇㪇㪈 㪇㪅㪇㪇㪇㪈 㪇㪅㪇㪇㪈 㪉㪎 㪉㪏 㪉㪐 㪊㪇 㪊㪈 㪊㪉 㪊㪊 㪌 㪈㪇 㪈㪌 㪉㪇 㪉㪌 㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪊㪇 㪘㪭㪜㪑㪊㪇㪅㪇㪈㪭 㪉㪐㪅㪏 㪭㫑㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪈㪇 㪈㪌 㪉㪇 㪉㪌 㪈㪇 㪇㪅㪐 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪉㪊㪭 㫅㪔㪊㪇㫇㪺㫊 㪇㪅㪏 㪇㪅㪎 㪇㪅㪍 㪇㪅㪌 㪇㪅㪋 㪇㪅㪊 㪇㪅㪉 㪌 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈 㪫㪸㪔㪉㪌㷄 㪠㪱㪔㪌㫄㪘 㫅㪔㪊㪇㫇㪺㫊 㪊㪇㪅㪈 㪉㪐㪅㪐 㪈㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪊㪇㪅㪊 㪊㪇㪅㪉 㪽㪔㪈㪤㪟㫑 㪈 㪇 㪊㪋 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀 㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿䌖㪀 㪈㪇㪇 㪫㪸㪔㪈㪉㪌㷄 㪘㪭㪜㪑㪇㪅㪇㪏㪉㫅㪘 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜 㪙㪜㪫㪮㪜㪜㪥㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀 㪫㪸㪔㪉㪌㷄 㪫㪸㪔㪎㪌㷄 㪫㪸㪔㪈㪉㪌㷄 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪫㪸㪔㪄㪉㪌㷄 㪈㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩷㩿㫅㪘㪀 zElectrical characteristic curves 㪐 㪏 㪎 㪍 㪌 㪋 㪊 㪉 㪇㪅㪈 㪈 㪇 㪇 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪘㪭㪜㪑㪐㪅㪇㪐㫇㪝 㪫㪸㪔㪉㪌㷄 㪽㪔㪈㪤㪟㫑 㪭㪩㪔㪇㪭 㫅㪔㪈㪇㫇㪺㫊 㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪛㪰㪥㪘㪤㪠㪚㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪱㫑㩿㱅㪀 㪈㪇㪇㪇㪇 㪈㪇㪇㪇 㪈㪇㪇 㪈㪇 㪈 㪇㪅㪈 㪈 㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㩿㫄㪘㪀 㪱㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0