ROHM RB496EA_1

RB496EA
Diodes
Schottky barrier diode
RB496EA
zApplications
Low current rectification
zLand size figure (Unit : mm)
zDimensions (Unit : mm)
r
㧗
r
Each lead has same dimension
‫ޓ‬㧙 ฦ࡝࡯࠼ߣ߽หኸᴺ
zFeatures
1) Small mold type (TSMD5)
2) Low IR
3) High reliability
㧗
㧙
r
㪇㪅㪋㪌 㪇㪅㪊㪌
㨪
㨪
㪇㪅㪐㪌
zStructure
Silicon epitaxial planer
㪉㪅㪋
㪈㪅㪇㩷㫄㫀㫅㪅
㪇㪅㪏
r
r
㪇㪅㪊㪌 㪇㪅㪋㪌
㪇㪅㪐㪌
㪈㪅㪐
㪫㪪㪤㪛㪌
zStructure
r
r
㪇㪅㪎
/CZ
㪩㪦㪟㪤㩷㪑㩷㪫㪪㪤㪛㪌
㪻㫆㫋㩷㩿㫐㪼㪸㫉㩷㫎㪼㪼㫂㩷㪽㪸㪺㫋㫆㫉㫐㪀㩷㪂㩷㪻㪸㫐
zTaping dimensions (Unit : mm)
㱢㪈㪅㪌㪌㫧㪇㪅㪇㪌
㪉㪅㪇㫧㪇㪅㪇㪌
㪋㪅㪇㫧㪇㪅㪈
㪊㪅㪉㫧㪇㪅㪇㪏
㪊㪅㪌㫧㪇㪅㪇㪌
㪊㪅㪉㫧㪇㪅㪇㪏
㪌㪅㪌㫧㪇㪅㪉
㪇䌾㪇㪅㪌
㱢㪈㪅㪈㫧㪇㪅㪈
㪋㪅㪇㫧㪇㪅㪈
㪊㪅㪉㫧㪇㪅㪇㪏
㪏㪅㪇㫧㪇㪅㪉
㪈㪅㪎㪌㫧㪇㪅㪈
㪇㪅㪊㫧㪇㪅㪈
㪈㪅㪈㫧㪇㪅㪇㪏
zAbsolute maximum ratings (Ta=25qC)
Parameter
Reverse voltage
Average rectified forward current (*1)
Forward current surge peak (60Hz̠1cyc) (*1)
Junction temperature
Storage temperature
Symbol
VR
Io
IFSM
Tj
Tstg
Limits
20
1
10
125
-40 to +125
Unit
V
A
A
㷄
㷄
(*1) Rating of per diode
zElectrical characteristic (Ta=25qC)
Parameter
Forward voltage
Reverse current
Symbol
VF1
Min.
-
Typ.
-
Max.
0.35
Unit
V
VF2
-
-
0.40
V
IR
-
-
500
μA
Conditions
IF=0.5A
IF=1A
VR=10V
Rev.B
1/3
RB496EA
Diodes
zElectrical characteristic curves
㪈㪇㪇㪇
㪈㪇㪇㪇㪇㪇
㪈㪇㪇㪇
㪫㪸㪔㪉㪌㷄
㪫㪸㪔㪄㪉㪌㷄
㪈㪇
㪈㪇㪇㪇㪇
㪫㪸㪔㪎㪌㷄
㪈㪇㪇㪇
㪈
㪫㪸㪔㪄㪉㪌㷄
㪈㪇
㪈
㪉㪇㪇
㪋㪇㪇
㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪝㩿㫄㪭㪀
㪭㪝㪄㪠㪝㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪍㪇㪇
㪇
㪌
㪈㪇
㪈㪌
㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀
㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪇
㪉㪇
㪋㪇㪇
㪊㪐㪇
㪊㪏㪇
㪈㪇
㪊㪋㪇
㪊㪊㪇
㪊㪉㪇
㪘㪭㪜㪑㪊㪈㪐㪅㪎㫄㪭
㪊㪈㪇
㪫㪸㪔㪉㪌㷄
㪭㪩㪔㪈㪇㪭
㫅㪔㪊㪇㫇㪺㫊
㪈㪌㪇
㪈㪇㪇
㪌㪇
㪊㪇㪇
㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪊㪇
㪉㪍㪇
㪉㪌㪇
㪉㪋㪇
㪘㪭㪜㪑㪉㪎㪇㪅㪌㫇㪝
㪉㪉㪇
㪏㪅㪊㫄㫊
㪊㪇
㪉㪇
㪈㪇
㪘㪭㪜㪑㪈㪋㪅㪍㪘
㪉㪈㪇
㪉㪇㪇
㪈㪺㫐㪺
㪠㪽㫊㫄
㪋㪇
㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜
㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀
㪌㪇
㪫㪸㪔㪉㪌㷄
㪽㪔㪈㪤㪟㫑
㪭㪩㪔㪇㪭
㫅㪔㪈㪇㫇㪺㫊
㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜
㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀
㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥
㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀
㪇
㪭㪝㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪭㪝㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪉㪊㪇
㪉㪌
㪠㪽㫊㫄
㪏㪅㪊㫄㫊 㪏㪅㪊㫄㫊
㪈㪺㫐㪺
㪉㪇
㪈㪌
㪈㪇
㪌
㪇
㪇
㪈
㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪠㪝㪪㪤㩷㪛㪠㪪㪩㪜㪪㪠㪦㪥㩷㪤㪘㪧
㫋
㪉㪇
㪈㪌
㪈㪇
㪌
㪇
㪈
㪈㪇
㪫㪠㪤㪜㪑㫋㩿㫄㫊㪀
㪠㪝㪪㪤㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈㪇㪇
㪈㪇㪇
㪈
㪧㪼㫉㩷㪺㪿㫀㫇
㪩㫋㪿㩿㫁㪄㪸㪀
㪩㫋㪿㩿㫁㪄㪺㪀
㪈㪇㪇
㪤㫆㫌㫅㫋㪼㪻㩷㫆㫅㩷㪼㫇㫆㫏㫐㩷㪹㫆㪸㫉㪻
㪠㪤㪔㪈㪇㫄㪘
㪠㪝㪔㪇㪅㪌㪘
㪈㪇
㪈㫄㫊
㫋㫀㫄㪼
㪇㪅㪏
㪝㪦㪩㪮㪘㪩㪛㩷㪧㪦㪮㪜㪩
㪛㪠㪪㪪㪠㪧㪘㪫㪠㪦㪥㪑㪧㪽㩿㪮㪀
㪫㪩㪘㪥㪪㪠㪜㪥㪫
㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀
㪧㪜㪘㪢㩷㪪㪬㪩㪞㪜
㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㪪㪤㩿㪘㪀
㪠㪽㫊㫄
㪈㪇
㪥㪬㪤㪙㪜㪩㩷㪦㪝㩷㪚㪰㪚㪣㪜㪪
㪠㪝㪪㪤㪄㪚㪰㪚㪣㪜㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈㪇㪇㪇
㪊㪇
㪉㪌
㪊㪇
㪉㪇㪇
㪊㪇㪇
㪉㪎㪇
㪉㪌
㪘㪭㪜㪑㪍㪉㪅㪈㫌㪘
㪊㪎㪇
㪉㪏㪇
㪉㪇
㪉㪌㪇
㪘㪭㪜㪑㪊㪏㪋㪅㪉㫄㪭
㪉㪐㪇
㪈㪌
㪊㪇㪇
㪫㪸㪔㪉㪌㷄
㪠㪝㪔㪇㪅㪌㪘
㫅㪔㪊㪇㫇㪺㫊
㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫌㪘㪀
㪋㪈㪇
㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪝㩿㫄㪭㪀
㪫㪸㪔㪉㪌㷄
㪠㪝㪔㪈㪘
㫅㪔㪊㪇㫇㪺㫊
㪌
㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀
㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪊㪌㪇
㪋㪉㪇
㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪝㩿㫄㪭㪀
㪈㪇㪇
㪫㪸㪔㪉㪌㷄
㪈㪇㪇
㪈㪇
㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥
㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀
㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫌㪘㪀
㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㩿㫄㪘㪀
㪫㪸㪔㪈㪉㪌㷄
㪈㪇㪇
㪇
㪽㪔㪈㪤㪟㫑
㪫㪸㪔㪈㪉㪌㷄
㪫㪸㪔㪎㪌㷄
㪛㪚
㪛㪔㪈㪆㪉
㪇㪅㪍
㪪㫀㫅㩿㱔䋽㪈㪏㪇㪀
㩷
㪇㪅㪋
㪇㪅㪉
㪊㪇㪇㫌㫊
㪈
㪇㪅㪇㪇㪈
㪇
㪇㪅㪈
㪈㪇
㪫㪠㪤㪜㪑㫋㩿㫊㪀
㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈㪇㪇㪇
㪇
㪇㪅㪌
㪈
㪈㪅㪌
㪘㪭㪜㪩㪘㪞㪜㩷㪩㪜㪚㪫㪠㪝㪠㪜㪛
㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫䋺㪠㫆㩿㪘㪀
㪠㫆㪄㪧㪽㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
Rev.B
㪉
2/3
RB496EA
Diodes
㪈
㪊
㪊
㪧㪼㫉㩷㪺㪿㫀㫇
㪘㪭㪜㪩㪘㪞㪜㩷㪩㪜㪚㪫㪠㪝㪠㪜㪛
㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫆㩿㪘㪀
㪩㪜㪭㪜㪩㪪㪜㩷㪧㪦㪮㪜㪩
㪛㪠㪪㪪㪠㪧㪘㪫㪠㪦㪥㪑㪧㪩㩷㩿㪮㪀
㪇㪅㪏
㪇㪅㪍
㪇㪅㪋
㪛㪔㪈㪆㪉
㪛㪚
㪪㫀㫅㩿㱔䋽㪈㪏㪇㪀
㪇㪅㪉
㪉㪅㪌
㪇㪘
㪇㪭
㫋
㪉
㪛㪚
㪈㪅㪌
㪧㪼㫉㩷㪺㪿㫀㫇
㪠㫆
㪫
㪭㪩
㪛㪔㫋㪆㪫
㪭㪩㪔㪈㪇㪭
㪫㫁㪔㪈㪉㪌㷄
㪛㪔㪈㪆㪉
㪈
㪇㪅㪌
㪘㪭㪜㪩㪘㪞㪜㩷㪩㪜㪚㪫㪠㪝㪠㪜㪛
㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫆㩿㪘㪀
Per chip
㪉㪅㪌
㪉
㪌
㪈㪇
㪈㪌
㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀
㪭㪩㪄㪧㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪉㪇
㫋
㪈㪅㪌
㪫
㪭㪩
㪛㪔㫋㪆㪫
㪭㪩㪔㪈㪇㪭
㪫㫁㪔㪈㪉㪌㷄
㪛㪔㪈㪆㪉
㪈
㪇㪅㪌
㪪㫀㫅㩿㱔䋽㪈㪏㪇㪀
㪇
㪇
㪠㫆
㪛㪚
㪪㫀㫅㩿㱔䋽㪈㪏㪇㪀
㪇
㪇㪘
㪇㪭
㪇
㪇
㪉㪌
㪌㪇
㪎㪌
㪈㪇㪇
㪘㪤㪙㪠㪜㪥㪫㩷㪫㪜㪤㪧㪜㪩㪘㪫㪬㪩㪜㪑㪫㪸㩿㷄㪀
㪛㪼㫉㪸㫋㫀㫅㪾㩷㪚㫌㫉㫍㪼㩿㪠㫆㪄㪫㪸㪀
㪈㪉㪌
㪇
㪉㪌
㪌㪇
㪎㪌
㪈㪇㪇
㪚㪘㪪㪜㩷㪫㪜㪤㪧㪘㪩㪘㪫㪬㪩㪜㪑㪫㪺㩿㷄㪀
㪛㪼㫉㪸㫋㫀㫅㪾㩷㪚㫌㫉㫍㪼䍼㩿㪠㫆㪄㪫㪺㪀
Rev.B
㪈㪉㪌
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0