NEW DD1 Series

COMPONENTS PRODUCT INFORMATION
NEW
0.5mm pitch stroke connector conforming to USB2.0 Standard
CONNECTOR
MB-0111-5
November 2006
DD1 Series
RoHS Compliant
Reverse type
Standard type
[Plug]
[Receptacle]
Angle type
Tilted type
[Cradle]
The DD1 series of connectors are single-line rectangular I/O connectors with 0.5mm
pitch stroke conforming to USB2.0 Standard.
Features
„Enhanced twisting resistance at mating/ unmating through equipping a guide rail
„Secure ground connection for EMI prevention
„Conforms to transmission specified in USB2.0 Standard
„PB free
Receptacle
„Occupied volume on chassis was considered at design and small package was
achieved.
„Available in standard and reverse mounting type to respond to various mounting
situations.
„Hot-plug structure
„Available on embossed tape for automatic mounting
Cradle
„Available in two types. Angle type, which expands cradle designing capacity, and
tilted type, slanted at a 75 degree angle to the board.
„13.8mm depth was achieved, which enables minimizing the occupied area on PCB
„Alignment guide structure: guide range of 1.0mm min. (receptacle ↔ cradle)
„Angle type available on embossed tape for automatic mounting.
Tilted type available in exclusive tray.
Plug
„Side-lock type
„Simple part structure enables simple wire termination.
„Standard cable diameter 5.0mm. Cables with other diameters can also be applied.
General Specifications
„No. of contacts : 30 pos.
„Contact resistance:
50m ohm max. (initial)
„Dielectric withstanding voltage :
DC500V per minute
„Insulation resistance:
1,000M ohm min. (initial)
„Rated current: for signal 0.5A
for power 1.0A
„Rated voltage: AC 30Vr.m.s
„Operating temperature:
-25 Deg. C to +75 Deg. C
„Mating cycle: 10,000 times
JAE PMK Div. Proprietary. Copyright © 2006,Japan Aviation Electronics Industry, Ltd.
1/8
MB-0111-5
Materials and Finishes
Receptacle
Components
Contact
Insulator
Shell
Materials/ Finishes
Copper alloy/ Contact: Au plating over Ni
Terminal: Au flash plating over Ni
Glass filled nylon resin
Stainless steel/ Sn plating over Ni
Cradle
Components
Materials/ Finishes
Contact
Copper alloy/ Contact: Au plating over Ni
Terminal: Au flash plating over Ni
Insulator
Glass filled nylon resin
Shell
Through-hole
Plate
Stainless steel/ Main frame: Ni plating
Through-hole: Sn plating over Ni
Copper alloy/ Main frame: Ni plating
Through-hole: Sn plating over Ni
Plug
Components
Materials/ Finishes
Contact
Copper alloy/ Contact: Au plating over Ni
Terminal: Au flash plating over Ni
Insulator
Glass filled nylon resin
Shell
Stainless steel/ Ni plating
Hood
Glass filled polycarbonate/ Color: Black
Lock Spring
Stainless steel/ Ni plating
Clamp Barrel
Copper alloy/ Ni plating
Bushing
PVC/ Color: Black
JAE PMK Div. Proprietary. Copyright © 2006,Japan Aviation Electronics Industry, Ltd.
2/8
MB-0111-5
Ordering Information
■Receptacle
DD1 - R
030 H
A
1
Series
R: Receptacle
Modification Code
1: Standard mounting type,
7: Reverse mounting type
No. of contacts: 30 pos.
Connection type
H: With hold down,
J: Without hold down
Plating specification
A: Contact area: Au plating: 0.1um min.,
Terminal area: Au flash plating
■Cradle
DD1 - B
030 H
A
Series
B: Cradle
1
Modification Code
Plating specification
A: Contact area: Au plating: 0.1um min.,
Terminal area: Au flash plating
No. of contacts: 30 pos.
Connection type
H: With hold down, V: 75 degree tilted type
■Plug
DD1 - P
030 M
A
Series
P: Plug
1
Modification Code
Plating specification
A: Contact area: Au plating: 0.1um min.,
Terminal area: Au flash plating
No. of contacts: 30 pos.
Connection type
M: Soldered to cable
Part Number
Board anchoring method
SJ Drawing Specification
Hold-down Through-hole Boss
DD1R030HA1
2
2
2
SJ100601
DD1R030JA7
-
4
2
SJ106061
DD1B030HA1
2
4
2
SJ100602
DD1B030VA1
-
6
-
SJ102068
DD1P030MA1
-
-
-
SJ100603
JAE PMK Div. Proprietary. Copyright © 2006,Japan Aviation Electronics Industry, Ltd.
JACS-3285
3/8
MB-0111-5
Receptacle: DD1R030HA1
SJ Drawing No.: SJ100601
(Dimension of mating area)
Unit: [mm]
Pattern Prohibited Area
Applicable board dimension
(for reference)
JAE PMK Div. Proprietary. Copyright © 2006,Japan Aviation Electronics Industry, Ltd.
4/8
MB-0111-5
Receptacle: DD1R030JA7
SJ Drawing No.: SJ106061
(Dimension of mating area)
Unit: [mm]
Pattern Prohibited Area
Applicable board dimension
(for reference)
JAE PMK Div. Proprietary. Copyright © 2006,Japan Aviation Electronics Industry, Ltd.
5/8
MB-0111-5
Cradle: DD1B030HA1
SJ Drawing No.: SJ100602
(Dimension of mating area)
Unit: [mm]
Pattern
Prohibited Area
Applicable board dimension (for reference)
Note 1: This drawing shows a disposable backup board to keep connector
and board in position during mounting.
JAE PMK Div. Proprietary. Copyright © 2006,Japan Aviation Electronics Industry, Ltd.
6/8
MB-0111-5
Cradle: DD1B030VA1
SJ Drawing No.: SJ102068
Unit: [mm]
(Dimension of mating area)
Drawing when mated
(for reference)
Pattern Prohibited Area
Applicable board dimension
(for reference)
JAE PMK Div. Proprietary. Copyright © 2006,Japan Aviation Electronics Industry, Ltd.
7/8
MB-0111-5
Plug: DD1P030MA1
SJ Drawing No.: SJ100603
Unit: [mm]
(Dimension of mating area)
(Dimension of
mating area) 6
Note) The plug is shipped in plug only.
Exclusive crimp tool CT150-6-RH07
(applicable cable diameter 5.0 mm) is
needed for wire connection and assembly.
Please contact us for other cable
diameters and further information.
Notice: Products shown in this leaflet are
Japan Aviation Electronics Industry, Limited
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2787 FAX: +81-3-3780-2946
made for the applications listed below. However,
if the above-mentioned products are to be used in
aerospace devices, marine cable-connection
devices, atomic power control systems, medical
equipment for life-support systems, or any other
specific application requiring extremely high
reliability, please contact JAE for further
information.
Recommended applications: computers, office
machines, measuring devices,
telecommunication devices (terminals, mobile
devices), AV devices, household applications, FA
devices, etc.
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2006,Japan Aviation Electronics Industry, Ltd.
8/8