SX-4417 Non-contacting steering sensor with combined torque and multi-turn position output The sensor provides dual torque and position outputs in one compact package. ELECTRICAL1 Torque Operaing Input Voltage Range 4.5 to 5.5 VDC Torque Input Voltage Absolute Limits -14.5 to +30 VDC Torque Supply Current 10 to 20 mA Torque Sensed Angle ±5° Torque Signal Linearity ±3% Torque Hysteresis ±1.3% Torque Signal Microgradient (over travel increment of 0.4°) Torque Wobble Position Operating Input Voltage Range 3.2% Vin ±1.0% Vin 40 mV 4.5 to 5.5 VDC Position Input Voltage Absolute Limits -0.3 to +6.5 VDC Position Supply Current 25 to 50 mA Position Signal Linearity ±1% Position Hysteresis ±0.25% Position Signal Microgradient (over travel increment of 2°) 1.11% Vin ±0.34% Vin MECHANICAL Torque Mechanical Travel Continuous Position Mechanical Travel Continuous Turning Torque (position rotor to housing) 0.02 NM maximum Weight 98 grams nominal ENVIRONMENTAL Operating Temperature Range Vibration -40°C to +85°C 10 to 55 Hz with 1 mm P-P constant displacement, 120 hours each of 3 planes Torque Rotational Life Infinite (non-contacting) Position Rotational Life 1 million revolutions Storage Temperature Range 1 -55°C to +105°C Specifications per 122-4417-44A and subject to change without notice. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 January 28 2015 Website: www.bitechnologies.com SX-4417 page 1 of 3 RoHS 2 Pb compliant SX-4417 OUTPUT CHARTS Typical Position Outputs 100% 90% 80% Outputs (% of Vp) 70% 60% P1 50% P2 P3 40% 30% 20% 10% 0% -900 -810 -720 -630 -540 -450 -360 -270 -180 -90 0 90 180 Angle of position rotor 270 360 450 540 630 720 810 900 CW direction -> Typical Torque Outputs 100% 90% 80% Outputs (% of Vt) 70% 60% 50% T1 T2 40% 30% 20% 10% 0% -6 -4 -2 CW direction -> 0 2 Relative angle (degrees) Different output signals can be easily configured by BI. Contact factory for details. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 January 28 2015 Website: www.bitechnologies.com SX-4417 page 2 of 3 4 6 SX-4417 OUTLINE DRAWING CW Dimensions in mm Detailed outline drawing available on request Pinouts BARCODE LABEL Micro QR M4 symbology Content not human readable: 4417 E YY DDD T SSSS Model # BI revision letter BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 January 28 2015 Website: www.bitechnologies.com SX-4417 page 3 of 3 Last digits of year Tester # Day of year Sequential serial #