Gate Drive Transformers HM42 - 10 001 LF TR

HM42
Electrical / Environmental
•
•
•
•
Gate Drive Transformers
Operating Temperature Range
-40°C to +125°C
Ambient Temperature, Maximum
+85°C
1500Vdc Isolation between Gate and Drive
Basic Insulation 1500Vrms between Primary and Secondary
S
RomHpliant
Co
Electrical Schematics
Figure 1
Figure 2
Figure 3
Figure 4
Specifications @ 25°C
Part
Number
Turns
Ratio
Primary
Inductance
(µH Min)
Leakage
Inductance
(µH Max)
Primary
DCR
(W Max)
Secondary
DCR
(W Max)
Pri-Sec
Insulation
Electrical
Schematic
Case
Size
Notes: (1) Inductance is measured at 100kHz, 0.1Vrms.
(2) It is recommended that the temperature of the component (ambient plus temperature rise) does not exceed 125°C under worst case
operating conditions.
Packaging
Standard: Embossed Tape & Reel
Reel: Diameter: Capacity:
Case size 10
Case size 20
Case size 30
Case size 40
=
=
=
=
=
13” (330.2mm)
750 Units
1,500 Units
1,000 Units
450 Units
Ordering Information
HM42 - 10
Model Series
Case Size:
10, 20, 30, 40
001
LF
TR
Tape & Reel Packing
Lead-Free
Sequence Code
32
Last
8 March
2010
LastUpdated:
Updated:9
April
2015
MAGNETIC COMPONENTS SELECTOR GUIDE 2009/10 EDITION
We reserve the right to change specifications without prior notice.
www.bitechnologies.com
Outline Dimensions (Inch/mm)
Case 10
Recommended Solder Pad Layout
Case 20
Recommended Solder Pad Layout
Case 30
Recommended Solder Pad Layout
Case 40
Recommended Solder Pad Layout
www.bitechnologies.com
2009/10 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE
We reserve the right to change specifications without prior notice.
33