HM56 Electrical / Environmental • Operating Temperature Range • DCR Tolerance • Operating Frequency -40°C to +125°C ±5 % Up to 3 MHz High Current Low Loss Ferrite Cube Inductors S RomHpliant Co Schematic Specifications @ 25°C Part Number HM56-10100R15LF HM56-11120R19LF HM56-11120R22LF HM56-11120R36LF HM56-11120R4LF HM56-11120R6LF HM56-11121R0LF HM56-11121R3LF HM56-11121R5LF HM56-11122R0LF HM56-11123R0LF HM56-13131R2LF HM56-14138R0LF Inductance 100 kHz, 0.1 V Heating(2) (1) Irated @ 0 Adc @ Irated Current µH ± 15% µH Typ. (Adc) (Adc) 0.15 0.19 0.22 0.37 0.40 0.60 1.00 1.30 1.50 2.00 3.00 1.20 8.00 0.14 0.18 0.20 0.36 0.39 0.54 0.90 1.25 1.45 1.90 2.80 1.00 7.00 68 75 60 58 50 30 28 25 24 20 18 20 3.5 39 45 45 37 37 37 23 23 17 17 12 34 16 Isat (3) (Adc) DCR (mW) ±5% Dim. D (mm) Dim. E (mm) Leads Dim. F (mm Typ.) Fig. 100 100 90 77 73 50 37 35 30 27 22 35 7 0.60 0.55 0.55 0.80 0.80 0.80 2.00 2.00 3.65 3.65 7.50 1.30 6.30 5.5 5.0 5.0 5.0 5.0 5.0 5.4 5.4 6.0 5.7 6.0 7.5 9.0 5.0 6.0 6.0 6.0 6.0 6.0 6.6 6.6 7.0 6.9 7.0 7.5 8.0 1.40 1.45 1.45 1.45 1.45 1.45 1.20 1.20 0.90 0.90 0.72 1.45 0.90 1 1 1 1 1 1 1 1 1 1 1 2 2 Notes: (1) The rated current, Irated, is the approximate DC current at which inductance will be decreased by 5% typical from its initial (zero DC) value. (2) The heating current is the DC current which causes the component temperature to increase by approximately 40°C. (3) Isat is the saturation current at which inductance rolls off approximately 30% from its initial (zero DC) value. Outline Dimensions (mm) 46 MAGNETIC COMPONENTS SELECTOR GUIDE 2009/10 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com Electrical Characteristics @ 25°C Packaging Standard: Tray Quantity Per Tray = 50 Units Quantity Per Carton = 650 Units Ordering Information Model Series HM56 - 1112 Case Size : 11 -- (First 2 digits) Width Dimension 12 -- (Last 2 digits) Length Dimension www.bitechnologies.com 0R6 LF Lead-Free Inductance Code 2009/10 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE We reserve the right to change specifications without prior notice. 47