Magnetics Business Unit Fast Facts HA72E-06 SERIES – MOLDED INDUCTOR The HA72E-06 series has been designed as a 155 C high temperature rated molded inductor for high stress environments that require high current saturation levels. It is ideal for high power density applications where size is critical and is AEC-Q200 certified. It is targeted at transportation designers of dc-dc converters who require a buck, boost, or buck-boost inductor for voltage regulation at fast switching frequencies up to 3MHz. It can be used as a filter inductor for EMI noise reduction. Market Segments Powertrain Chassis Features Lighting High Saturation Current per Unit Volume Braking Operating Temperature: -40°C to +155°C Rust Resistant Safety Low DCR Low Core Loss Applications Magnetically Shielded DC-DC Converters Robust Construction Low pass Ripple Current Filters AEC-Q200 Automotive Certification EMI Filters Transmission Control Electric Power Steering Benefits High operating temperature allows for higher ambient or higher temperature rise in circuit design Moisture resistant - molded body will not rust High power density can save board space and reduce weight for fuel cost savings © Copyright TT electronics, 2012. All rights reserved. Subject to change without prior notification. Issue: 2012.1 www.ttelectronics.com