AECQ-200 CERTIFIED 0 HA72E-12 Electrical / Environmental High Power High Performance Molded Surface Mount Inductors Operating & Storage Temperature Temperature Rise, Maximum Operating Frequency • • • -40°C to +155°C 40°C Up to 5MHz Specification @ 25°C Part Number Heating Current(2) (Adc) 35 32 27 22 18 10 5 Inductance(1) µH±20% HA72E-12R68HLF HA72E-121R0HLF HA72E-121R5HLF HA72E-122R2HLF HA72E-123R3HLF HA72E-12100HLF HA72E-12200HLF 0.68 1.00 1.50 2.20 3.30 10.0 20.0 DCR (mΩ) Isat(3) (Adc) Typ. Max. 35 31 27 24 20 9 8 1.4 1.7 2.5 3.5 5.7 16.4 37.0 1.6 2.0 3.0 4.2 6.8 17.2 40.5 Notes: (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. (2) The Heating Current is the approximate DC current which causes the component temperature to increase by 40°C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. (3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. (4) The part temperature (ambient + temperature rise) should not exceed 155°C. Outline Dimensions (mm) Top View Side View Bottom View Recommended PCB layout MAGNETIC COMPONENTS We reserve the right to change specifications without prior notice. Page 1 OF 2 www.bitechnologies.com Electrical Characteristic @ 20°C (Cont’d) Packaging / Ordering Information One reel (13”) One shipping carton (6 reels) HA72E 400 pcs 2400 pcs - 12 R68 LF TR13 13” tape & reel packing Model Series Case Size Lead Free Inductance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For values below 10µH, “R” denotes the decimal point. MAGNETIC COMPONENTS We reserve the right to change specifications without prior notice. Page 2 OF 2 www.bitechnologies.com