CUPP RELAYS CUPP Series Relays The CUPP Series has become a standard in the European relay market due to its versatile switch and schematic options. The staggered pin layout gives more space and allows for higher isolation from pin to pin on the PC board when compared to 1.0” x 0.1” relays. Designers have a choice between two switch technologies: ruthenium sputtered dry reed and the vertically mounted high performance Hg wetted contact. CUPP Series Features u Standard nominal coil voltages include 5, 12, and 24 volts u Designed to meet the most stringent telecommunications specification on a worldwide basis u Ideal for optional high isolation between input & output (up to 4000Vrms) u Custom multi-pole contact forms available CUPP 1A CUPP 1A CUPP 1A 0.020 (0.50) 1.30 Max. (33.0) DIMENSIONS CUPP 2A CUPP 2A in Inches (Millimeters) CUPP 2A 0.020 (0.50) 0.025 DIA. (0.64) 1.30 Max. (33.0) APPLICATIONS Telecom u Process control u General purpose electronics u Industrial u Security u 0.020 (0.50) 0.025 DIA. (0.64) 1.30 Max. (33.0) 0.020 (0.50) 1.30 Max. (33.0) 0.025 DIA. (0.64) 5 3 1 5 3 1 0.472 Max. (12.0) 0.125 (3.20) 0.472 Max. 0.393 Max. (10.0) (12.0) 0.025 DIA. (0.64) 0.393 Max. (10.0) 0.125 (3.20) 7 5 3 1 0.900-0.007 (22.86-0.18) 1.100-0.007 0.900-0.007 (27.94-0.18) (22.86-0.18) 7 5 3 1 1.100-0.007 (27.94-0.18) 6 4 2 Top View 6 4 2 0.900-0.007 (22.86-0.18) 1.100-0.007 0.900-0.007 (27.94-0.18) (22.86-0.18) 1.100-0.007 (27.94-0.18) Top View 0.100 (2.54) 0.300 (7.62) 8 6 4 2 0.100 Top View (2.54) 8 6 4 2 Top View 0.300 (7.62) Ordering Information NOTE u Relays with Hg Wetted option must be mounted vertically ±30˚ Part Number CUP-X-XXXX-X-XX Model Number Nominal Voltage P = Metal cover fully sealed 05 = 5V 12 = 12V Contact Form 24 = 24V 001A = 1 Form A Switch Type 002A = 2 Form A 1 = Dry Reed 5 = HG Wetted 07082013 tel: (401) 943.2686 | fax: (401) 942.0920 CUPP Parameters Dry Reed Test Conditions Units 1A Hg Wetted 2A 1A 2A COIL SPECIFICATIONS Nom. Coil Voltage VDC 5 12 24 5 12 24 5 12 24 5 12 24 Max. Coil Voltage VDC 12 29 57 9 23 45 11 26 39 9 23 35 70 445 1700 105 620 1400 70 420 1080 8.4 16.8 3.5 8.4 16.8 3.5 8.4 16.8 1.2 1.3 Coil Resistance 140 855 3285 +/- 10% (25°C) Ohms Operate Voltage Must Operate by VDC - Max. 3.5 Release Voltage Must Release by VDC - Min. 0.28 0.7 8.4 16.8 3.5 1.4 0.25 .65 1.3 0.5 1.9 0.5 CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 200 1000 1000 Switching Current Max DC/Peak AC Resist. Amps 0.75 0.75 2 2 Carry Current Max DC/Peak AC Resist. Amps 1.5 1.5 4 4 Contact Rating (Resistive Load) Max DC/Peak AC Resist. Watts 10 10 50 50 Life Expectancy Signal Level 1.0V 10,mA x10 Ops. 500 500 2000 2000 50mV/10mA mOhms 200 200 Insulation Resistance (minimum) Across Open Contacts Contact to Coil Ohms Ohms 1010 1010 1010 1010 108 1010 108 1010 Capacitance - Typical Across Open Contacts Open Contact to Coil Closed Contact to Coil pF pF pF 1 2.5 5 1 2.5 5 12 2 5 12 2 5 Dielectric Strength (minimum) Across Open Contacts Contacts to Coil VDC/Peak VDC/Peak 350 2800 350 2800 2000 2800 2000 2800 At Nominal Coil Voltage, 10 Hz Square Wave ms 0.55 0.55 0.5 0.5 1.5 1.5 Static Contact Resistance 6 RELAY SPECIFICATIONS Operate Time (including bounce) Release Time - Typical All parameters are measured at 25°C unless otherwise stated. ms CUPP 1A CUPP 1A CUPP 2A CUPP 2A 5 3 1 64 2 5 3 7531 7531 1 64 2 Top View Top View CUPP 1A CUPP 1A CUPP 2A CUPP 2A 5 4 6 4 6 Top View Top View 3 1 64 2 5 3 7531 7531 1 64 2 Top View Top View 4 6 4 6 Top View Top View Environmental Ratings: Storage Temp: -40°C to +105°C; Operating Temp: -38°C to +85°C; Solder Temp: 270°C max; 10 sec. max All electrical parameters measured at 25°C unless otherwise specified. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s 07082013 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. 2.2